Inhaltszusammenfassung zur Seite Nr. 1
SHR-1041/1041K
4 Channel DVR
User Manual
imagine the possibilities
Thanks you for purchasing this Samsung product.
To receive a more complete service, please
register your product at
www.samsungsecurity.com
02235A_SHR-1041K_ENG.indb 1 2009-02-17 오전 10:50:24
Inhaltszusammenfassung zur Seite Nr. 2
overview Features This product enables you to record 4 channels of camera image and voice source simultaneously. This feature provides an excellent picture quality for both real time monitoring and search. • You can also monitor remote videos or search for your previous recordings and change the menu settings of the DVR via the network. • As this product can bypass the Windows operating system to implement the DVR-specific operating system on its hardware components, the overall operation is
Inhaltszusammenfassung zur Seite Nr. 3
● overview important saFety instructions Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, Install in accordance with the manufacturer’s instructio
Inhaltszusammenfassung zur Seite Nr. 4
overview BeFore start This user’s manual provides Information for using DVR such as brief introduction, part names, functions, connection to other equipment, menu setup, and the like. You have to keep in mind the following notices: • SEC retains the copyright on this manual. • This manual cannot be copied without SEC’s prior written approval. • We are not liable for any or all losses to the product incurred by your use of non-standard product or violation of instructions mentioned in this man
Inhaltszusammenfassung zur Seite Nr. 5
● overview standards approvals This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 M of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference t
Inhaltszusammenfassung zur Seite Nr. 6
overview c ontents 2 Features overview 3 Important Safety Instructions 4 Before Start 6 Contents 2 8 Part Names and Functions (Front) insta LLation 9 Part Names and Functions (Rear) 10 Remote Controller 11 Standard Camera 8 12 Night-Vision Camera 13 Camera Bracket 14 Connecting with other Device 17 Starting the System getting started 17 Login 17 18 Icons on the Live Screen Live 19 Live Screen Menu 18 21 Search search 21 23 Archiving Bac Kup 23 _ overview 02235A_SHR-1041K_ENG.indb 6 2009
Inhaltszusammenfassung zur Seite Nr. 7
● overview 24 System Setup settings 40 Record 24 44 Introduction we B viewer 44 Connecting Web Viewer 46 Connecting DVR 48 Using Live Viewer 44 50 Remote Setup 52 Search 56 Product Specification appendix 56 English _ 02235A_SHR-1041K_ENG.indb 7 2009-02-17 오전 10:50:26
Inhaltszusammenfassung zur Seite Nr. 8
installation part n ames and Functions (Front) POWER ALARM REC NETWORK DIGITAL VIDEO RECORDER SHR-1041 DISPLAY SEARCH MENU 1 part names Functions power Used to turn on or off the system. Each time you press in Live mode, the screen will be switched in the sequence of 4-split, disp Lay Single and Auto Sequence in order. serach Goes to the search screen. menu Goes to the system menu screen. POWER ALARM REC NETWORK DIGITAL VIDEO RECORDER SHR-1041 direction +_%$ : Used to select a s
Inhaltszusammenfassung zur Seite Nr. 9
● insta LLation part n ames and Functions ( r ear) VIDEO IN CH1 CH3 ALARM OUT CAMERA IN VIDEO AUDIO PS/2 NETWORK DC 12V OUT OUT MOUSE 1 2 3 4 VGA OUT CH2 CH4 1 part names Functions video in Composite video signal input port (BNC type port). camera in RJ-11 port for camera input. video out Composite video signal output port (BNC type port). audio out Audio signal output port (RCA jack). vga out Video output port for video output to a VGA monitor. aLarm out Alarm output port ps /
Inhaltszusammenfassung zur Seite Nr. 10
installation r emote c ontro LLer search Bac Kup (archiving ) Switches to search mode for video search. At the moment, Switches to backup mode. you should select an authorized user and enter the password. power Turns on or off the system. channe L If you press a channel number in real time monitoring or search mode, the camera’s input of the selected channel is displayed in full screen. id Used to separately control each DVR in a multi DVR system by setting a unique ID for each DVR. pLay Play
Inhaltszusammenfassung zur Seite Nr. 11
● insta LLation standard c amera A surveillance camera is provided in addition to the main unit. Check the installation steps and the features of each camera. c amera part n ames Lens : Focal length of 3.8mm enables you to cover relatively longer range of monitoring. microphone : Transfers the onsite sound to the monitor. c amera fitting groove : Groove that is used to fit the camera bracket. There exist two grooves; one on the top and one on the bottom. 6-pin modular jack : Connects the c
Inhaltszusammenfassung zur Seite Nr. 12
installation n ight- vision c amera Equipped with the IR LED and the illumination sensor, enables you to monitor at night as well as in daytime. You can also use it indoors as well since it is designed for outdoor use. c amera part n ames Lens : Focal length of 3.8mm enables you to cover relatively longer range of monitoring. illunination sensor : Detects incoming light to control the IR LED. ir Led : This is an infrared LED that is controlled by the illumination sensor. c amera fitting groove
Inhaltszusammenfassung zur Seite Nr. 13
● insta LLation c amera Brac Ket The camera bracket can be used to install the camera on the wall, ceiling or shelf. c amera Bracket specification use Indoor installation Wall or Ceiling 57(W) x 47.2(H) x 100.5(L) mm/ dimensions 2.25(W) x1.86(H) x 3.95(L) inch w eight 130g (0.29 lbs) o perating -10˚C ~ 50˚C (14˚F ~ 122˚F) t emperature accessories Screw (M4 X L15) : 3 pcs adjusting the c amera Bracket 1. Choose an installation site that can sufficiently support the weight of the equipments t
Inhaltszusammenfassung zur Seite Nr. 14
installation c onnecting with other device ALARM OUT VIDEO IN VIDEO IN ALARM OUT CH1 CH3 CAMERA IN VIDEO AUDIO PS/2 NETWORK DC 12V OUT OUT MOUSE 1 2 3 4 VGA OUT CH2 CH4 AUDIO OUT(AMP IN) NETWORK POWER MOUSE VIDEO OUT VIDEO OUT (composite) CAMERA IN (VGA) c onnecting alarm o utput and r elay VIDEO IN If activated, the alarm will output through the ALARM OUT port on the rear panel. ALARM OUT CH1 CH3 Check the relay output type (Normal Open/Normal Close) and connect to the appropriate port (NO/N
Inhaltszusammenfassung zur Seite Nr. 15
● instaLLation connecting to the internet Cable/ADSL Modem IP Router or HUB Internet or Direct LAN (Fixed/Static IP) POWER ALARM REC NETWORK DIGITAL VIDEO RECORDER SHR-1041 DISPLAY SEARCH MENU SHR-1041 LOCAL PC #1 LOCAL PC #2 Data Line : Video Line : CAMERA 1. Connect LAN cable of Cable/ADSL modem or Direct Fixed/Static IP LAN Line to WAN port of IP Router. . Connect LAN ports of IP Router to Ethernet port SHR-1041 to be set up and to Ethernet port of Local PC to use during setup. . Conn
Inhaltszusammenfassung zur Seite Nr. 16
installation connecting the network You can use the 10/100 Mbps Ethernet connector on the product to connect to the network. Connecting to the network enables you to perform various functions including remote monitoring, remote search and remote control. Cable/ADSL/VDSL IP Router or HUB Internet or DDNS Server Direct LAN (Fixed/Static IP) (websamsung.net) POWER ALARM REC NETWORK DIGITAL VIDEO RECORDER SHR-1041 DISPLAY SEARCH MENU SHR-1041 Local PC #1 Local PC #N CAMERA Remote User PC #1 Remote
Inhaltszusammenfassung zur Seite Nr. 17
● getting started getting started starting the system 1. Connect the power cable of the DVR to the wall outlet. . You will see the initialization screen. The initialization process may take a while, depending on the condition of the DVR. . The Live screen appears. Login To access a DVR or restricted menu, you should have logged in to CAM1 CAM2 C C the DVR. 1. If you start the system or try to access restricted menus, the login LOGIN dialog pops up. USER ADMIN Double-click any area on th
Inhaltszusammenfassung zur Seite Nr. 18
live icons on the Live screen The icons on the Live screen indicate the status of the system. CAM1 C 2009/01/01 00:00:10 R OW CAM1 C name description camera name Displays the name of the camera. CAM1 CAM1 C C C Indicates continuous recording. A Indicates alarm recording. recording M Indicates motion detection recording. modes P Indicates manual recording. This box will turn green if an event recording is scheduled. Displays the network connection status. R OW 2009/01/01 00:00:10 Displa
Inhaltszusammenfassung zur Seite Nr. 19
● Live Live screen menu In Live mode, right-click any area or press the [menu ] button on the remote control to display the Live menu. CAM1 CAM2 C SEARCH 1 ARCHIVING REC START SEQUENCE SYSTEM SETUP CAM3 CAM4 RECORD SETUP LOGOFF SHUTDOWN 2009/01/01 00:00:10 R OW name description Searches for and plays recording data. search Refer to “search ”. (Page 21) Searches for a backup device and perform the backup for each channel or at a desired time. archiving Refer to “archiving ”. (Page
Inhaltszusammenfassung zur Seite Nr. 20
live sequence The screen will switch to Sequence mode. 1. Press the [menu ] button on the front panel or right-click any area. . Select . The screen will switch to Sequence mode. . Double-click any area or select again to stop Sequence mode. Double-click it again to switch back to split mode. CH1 CH2 CH3 CH4 CH1 CH2 CH3 CH2 CH5 CH6 CH7 CH8 CH1 CH2 CH3 ; CH1 ; CH4 CH5 CH6 CH9 CH10 CH11 CH12 CH1 CH1 CH2 CH2 CH13 CH14 CH15 CH16 CH3 CH4 CH4 CH5 CH6 CH7 CH8 CH9 Press the [
