Inhaltszusammenfassung zur Seite Nr. 1
DVR2104
Network Hardware Compression
MPEG4 Stand Alone
Digital Video Recorder
User Guide
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
Inhaltszusammenfassung zur Seite Nr. 2
SAFETY PRECAUTIONS Power l This video recorder is used on 110V-240V AC and connected to the ground. Confirm the voltage before using. l No using the machine for a long time, cut off the machine power supplies, and pulls out the plug from the AC outlet. Caution l There are two modes of video output: one is BNC, and the other is VGA. They can be switched over via STEP key.The default output is BNC. Link the lines, power on the Recorder, after the clock on VFD of the front block goes, pr
Inhaltszusammenfassung zur Seite Nr. 3
The correct order is as follow: clear assistant disc→clear master disc→out setting →save→turn off→restart→ other setting. Advice l Record the television program or program of VCD/ DVDs, please remember absolutely not to infringe on the right of work power and others of the third parties. ii ii PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
Inhaltszusammenfassung zur Seite Nr. 4
The characteristic and the function of this video recorder Characteristic: l Use PHILIPS (PNX1500 CMOS DSP chip), offer more high compression and definition. l The PSOS that separate from PC completely is used. l Start quickly, auto protects and auto resume. l The operation is in brief; use convenience, and the operation are similar with VCR. Function: System mode l Professional operate system PSOS, escape from the PC completely, avoid the calculator virus inf
Inhaltszusammenfassung zur Seite Nr. 5
l Overwrite l Auto alert setting for surplus content. l Record before alert function, store in EMS memory l Dormancy function is set to reduce the quantity of heat and prolong the use. Search l Search on time/date/list/exact. l Search on 1 HD singly, also display the list corresponding. l Normal/alert record search. l Dairy Replay l More images play at the same time, requesting no sound output while having another image. l Single video and audio play at the same time. l PLAY func
Inhaltszusammenfassung zur Seite Nr. 6
l Front panel control l IR remote control. l Network control Back up l Through network l Through USB2.0 Upgrade l Through USB……… l Through network iii iii PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
Inhaltszusammenfassung zur Seite Nr. 7
TABLE OF CONTENTS FEATURE AND FUNCTION. ……………………………………..……… …. 1 simple system operation 1.RECORD OPERATION 1-1.MANUAL……………………… ………………………………………… …3 1-2.ALERT.....................................................................................................3 1-3.MOTION DETECT ..................................................................................3 1-4.SCHEDULING......................................................................
Inhaltszusammenfassung zur Seite Nr. 8
3. general setting.........................................................................................13 4. record setting...........................................................................................14 5.alert setting...............................................................................................16 6. schedule setting ......................................................................................18 7. record searching..................................
Inhaltszusammenfassung zur Seite Nr. 9
System connection front of the panel map VFD Remote Power USB Video Out Audio Out Menu VFD 1 Alert LED 8 Network ○ ○ 2 Timming LED 9 Quality ○ ○ 3 Date 10 Record ○ ○ 4 Time 11 Play ○ ○ 5 P .T. Z 12 Step ○ ○ 6 Alert 13 Review ○ ○ 7 HDD 14 Forward ○ ○ 1 PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
Inhaltszusammenfassung zur Seite Nr. 10
Back panel and connection terminal ① ③ ④ ⑦ ② ⑤ ⑧ ⑩ ⑥ ⑨ ① Audio input 1,2,3,4 ② Audio output 1,2 ③ Video input 1,2,3,4 ④ Video output 1,2 ⑤ VGA interface ⑥ Net connect RJ45 ⑦ RS232 interface ⑧ Alert input/output signal and RS-485 signal terminal. the order from left to right is: alert output 1,2;alert input 1,2,3,4;earth;RS-485 ⑨ Fan base ⑩ Power line plug 2 PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
Inhaltszusammenfassung zur Seite Nr. 11
System operation 1. Record operation Record operation can be divided into Manual, Auto, Alert, Motion detect, and the combination operation of above. Manual l “ record setting”, Press button “quantity” . l press “=” start record, 4-channel start record at the same time, the mark of record appear on the VFD and monitor. l manual belong to the normal record. l Press “=” stop manual record. Alert Record l The parameter in" the alert records image the enactment
Inhaltszusammenfassung zur Seite Nr. 12
the left of the VFD display area and screens l Press" scheduling “and input manager's password to cancel the scheduling of record. Combination record l The combination record can be use according to need. Such as the scheduling detects record, it needs to combine the scheduling record setting and detect record setting. 2. Play/ search You can use IE browser software or one to one specific software. 1. one-one specific display software: l Play, Press “4” on the front panel to play,
Inhaltszusammenfassung zur Seite Nr. 13
User guide Switch on n Confirm the safety notice has already carried out before switching on. n Check the conjunction of system, input, output and the power supply before switching on. n Confirm the image standard (NTSC/PAL) and monitors are met the request. n If there is correct, start the exterior equipments first. n If the DVR is shut down abnormally, no OSD mark will appear when switching on, and the monitor image is black. The system will so
Inhaltszusammenfassung zur Seite Nr. 14
early alert has set not to be "0", there will be alert. The video recorder continues to record after the alert is cleared. It will stop recording when HDD is full and show a signal for advice. n In manual recording, schedule recording (auto recording) and alert recording, the degree is increased. Therefore, the manual recording if useless when the system has started the schedule recording, and the alert recording can interrupt the other two. The manual and schedule recordings are normal on
Inhaltszusammenfassung zur Seite Nr. 15
n When “pre-alert recording” is no set to be “0”, press “alert” and the system will be in alert. When there is alert, the system will record the pre-alert condition. When pre-alert recording” is set to be “0”, the system won’t be in alert, and the system won’t record the pre-alert condition. n The largest time for alert recording is “pre-alert recording” (less than one minute) plus the time for keeping the alert input effective, and plus “after-alert recording” (less than one minute). n
Inhaltszusammenfassung zur Seite Nr. 16
n Pre-set “schedule recording parameter setting”, and press “schedule” on the front panel to start schedule. The signal“¹” will show. n It is an auto way for recording, and it cannot be used with manual recording at the same time. When you press “schedule”, any other button won’t be effective except “guard”, “vision”, “play” and “manual”. Even the system is not under recording, press “record” and the system cannot perform manual recording. But user can set time by pressing “menu”. The othe
Inhaltszusammenfassung zur Seite Nr. 17
n Continually press 8 or7, and the system will have 6 levels of forwarding and 5 levels of reviewing to shift the speed. Searching play Video recorder can perform searching play when it is playing. There are two kinds of searching play: searching depends on time or on the paragraph. The former is through window setting and pressing keys on the front panel performs the later. How to use searching play depending on time: press “option”, enter “recording searching setting”, choose from the n
Inhaltszusammenfassung zur Seite Nr. 18
decides what settings and operations the operator can do. n The manager’s and operator’s password can be set and modified in “authority”, after inputting the old password. The new password should be input for twice. The system will only accept the new password when they are the same. n You can choose any eight numbers from 0 to 9 as the password, and input them through the number keys in the front panel. The password should have 8 numbers. n The system can have no password. In the “auth
Inhaltszusammenfassung zur Seite Nr. 19
two HDDs (the capacity of HDD can be different.) When installing the second HDD, please set it “slave” as the instruction of the manufacture. Otherwise, the system won’t work. n The second HDD can work as an “assistant disc” to store information and operate. The choice of HDD is set through “choose working disc”. When the slave is confirmed as the working disc, the playing and searching will be operated in slave, but the recording is still on the master. n “Format disc” is similar to init
Inhaltszusammenfassung zur Seite Nr. 20
Record searching n Press “searching”, and the list will appear. n Searching in the paragraph: move “é” or “ê” to choose certain recording in the listed files, press “searching” again, the “searching in the paragraph” dialogue box will appear, input the beginning time and press “searching”, the system will begin to search in the paragraph n Repeatedly watching function: move “é” or “ê” to choose certain recording in the listed files, press “option” and then “quality”, choose the beginnin
