Inhaltszusammenfassung zur Seite Nr. 1
Video Cassette Recorder
NV-FJ720 Series
Operating Instructions
Contents Page
Warning and Important Information 2
Controls and Components 3
Connections 5
Tuning the TV to Your VCR 6
Storing TV Broadcasts in Your VCR 7
Preparations for G-Code Programming 11
Settings Using the On Screen Display 12
Option Setting 13
Playback 14
Recording 16
Timer Recording 19
G-Code Programming 22
Search Functions 23
Editing 26
Before Requesting Service 28
Specifications 30
Before attempting to connect, operate or a
Inhaltszusammenfassung zur Seite Nr. 2
Longrun Head System Warning and Important This longrun head system enables approximately 8,000 Information hours of recording/playback with high quality images. Newly developed head cylinder with narrower head windows and tapered cylinder design effectively protects As this equipment gets hot during use, operate it heads from dust and prevents head clogging. in a well ventilated place; do not install this Plus, [Alumina] Head Cleaner further enhanced cleaning equipment in a confined space such a
Inhaltszusammenfassung zur Seite Nr. 3
Controls and Components 1YWZ 6 X ANF7[ REW FF POWER EJECT STOP PLAY SEARCH INSERT TIMER REC CVC PICTURE MODE A.DUB REC/OTR PAUSE/STILL \] 5 ^_ `a b c de IN (AV1) OUT IN AUDIO OUT VIDEO RF L L AUDIO R R OUT fi gh jk R Q 1 P POWER POWER DIRECT REC OSD REPEAT DIRECT REC OSD REPEAT O Í Í 2 N 123 123 M 4 5 6 4 5 6 VOLUME VOLUME 3 L 78 9 78 9 + + U 4 K AV AV 0 – 0 – NAVI 5 NAVI INDEX INPUT SELECT INDEX INPUT SELECT J SEARCH PICTURE MODE REC SEARCH PICTURE MODE REC 6 I V MENU MENU G-CODE/SV H G-COD
Inhaltszusammenfassung zur Seite Nr. 4
1 POWER button V Child Lock Function buttons (Convenient function to prevent unauthorized use) 2 Numeric buttons This function deactivates all buttons on the VCR and the To select the programme positions (1–99). remote control. Use this function, when you do not want Example: other people to operate the VCR. 9 09: To Activate the Child Lock Function: 1 9 19: 1 Hold down the OK and the OFF (i) buttons V simultaneously until the [! " hold] indication appears in the To enter a G-Code number. VCR di
Inhaltszusammenfassung zur Seite Nr. 5
Setting the Remote Control to Operate Your Connections TV You can operate the TVs of the manufacturers listed below with the remote control after setting it. This section shows you how to connect the VCR to an aerial, TV, etc. This setting procedure allows you to operate the TVs of some manufacturers using the supplied remote control. When the VCR is turned on after unpacking and connecting the aerial cable and the mains lead, Plug in Preparation Auto Tuning starts automatically. – Set the VCR/T
Inhaltszusammenfassung zur Seite Nr. 6
To Change the RF output Channel Tuning the TV to Your VCR In some rare cases after tuning the TV to your VCR, interference may be visible on the picture. To get rid of this interference, you can manually adjust the RF output channel The VCR supplies a signal to the TV via the RF coaxial cable a few channels up and down from the current setting. The on channel E21–E69. procedure is described below. It is possible to view the video picture on your TV in the same way that you watch TV broadcasts. O
Inhaltszusammenfassung zur Seite Nr. 7
Auto Tuning Using the On Screen Display Storing TV Broadcasts in Your VCR Introduction The VCR is tuned automatically by Plug in Auto Tuning. However, Auto Tuning using the On Screen Display should The VCR is fitted with its own tuner (just like a normal TV) be performed according to the following method if necessary. and can be preset to receive up to 99 TV broadcast stations. Preparations – Confirm that the TV is on and the VCR viewing channel is Plug in Auto Tuning selected. When the VCR is t
Inhaltszusammenfassung zur Seite Nr. 8
Manual Tuning Procedure Direct Tuning 1 Press the MENU button U to display the Main menu on Follow steps 1 to 3 of Manual Tuning Procedure. the TV screen. 4 Confirm that [CLEAR] is set to [OFF]. 2 Press the Cursor buttons (34) S to select [TUNER PRESET] then press OK button T. 5 Press the Cursor buttons (34) S to select [SEARCH]. 3 Press the Cursor buttons (34) S to select [CH] then 6 Press the Numeric buttons 2 to enter the number of the select the channel number you want tuned by pressing desi
Inhaltszusammenfassung zur Seite Nr. 9
To Add and Delete the Channel Example: Example: If you want to add a new channel between Channel 4 and If you want to delete Channel 6, Channel 6, 1 Press the MENU button U to display the Main menu on 1 Press the MENU button U to display the Main menu on the TV screen. the TV screen. On Screen Display MENU MENU LANGUAGE LANGUAGE CLOCK SET 2 Press the Cursor buttons (34) S CLOCK SET TUNER PRESET TUNER PRESET CH ADD&DELETE 2 Press the Cursor buttons (34) S to select [CH ADD&DELETE] then
Inhaltszusammenfassung zur Seite Nr. 10
Language Setting of the On Screen Display Setting the Clock of Your VCR Select one of the three languages displayed: English, Arabic The clock will operate for at least 3 years in total after it has and Russian. been set, - in the event of a power failure, it will operate on its backup system. After 3 years, it will only operate for 1 hour Preparations on its backup system. – Confirm that the TV is on and the VCR viewing channel is selected. Preparations – Turn on the VCR. – Confirm that the TV
Inhaltszusammenfassung zur Seite Nr. 11
The guide channel numbers are subject to change. Please Preparations for G-Code refer to the guide channels listed in the latest newpapers or TV listings. Programming Example: Identification numbers must be set for G-Code programming. Proceed with the G-Code programming operation described TV Station Name Guide Channel on page 22, and the identification numbers of the TV stations TVB Jade 001 concerned will be set automatically. This will allow G-Code ATV Home 002 programming to be undertaken wi
Inhaltszusammenfassung zur Seite Nr. 12
3 Programme position Settings Using the On Screen 4 Edit mode Display When edit mode is set, the On Screen Display appears A.DUB: Audio Dubbing Preparations INSERT: Insert Editing – Confirm that the TV is on and the VCR viewing channel is AV INSERT: AV Insert Editing selected. 5 Tape running display – Turn on the VCR. – Set the VCR/TV switch E to [VCR]. Stop, Eject Rewind, Review 6 To Set the Colour TV System On Screen Display Fast Forward, Cue 5 1 Press the MENU button U to SYSTEM display the M
Inhaltszusammenfassung zur Seite Nr. 13
DELETE NAVIDATA: To delete all the Jet Navigator Option Setting data stored in the VCR’s memory. – Press the Cursor buttons (21) S to select [OK] then On Screen Display press the OK button T to do the deletion. 1 Press the MENU button U to MENU display the Main menu on the TV LANGUAGE CLOCK SET NO: Initially set at this position. TUNER PRESET screen. CH ADD&DELETE END: It is done to delete all the Jet Navigator data. G-CODE CH SET SYSTEM OPTION SELECT : , OK DIRECT REC: To set to the
Inhaltszusammenfassung zur Seite Nr. 14
Notes: Playback – JET SEARCH, cue, review or slow playback will be automatically cancelled after 10 minutes, and still playback after 5 minutes. Preparations – During playback function other than normal playback, – Confirm that the VCR is on. horizontal noise bars may appear in the picture, the colour – Confirm that the TV is on and the VCR viewing channel is of the picture may be unstable, or the picture may be selected. otherwise distorted. – Insert a recorded video cassette. – When you play b
Inhaltszusammenfassung zur Seite Nr. 15
To Stop Playback Automatically To Playback in the Desired Picture Quality (Playback Off Timer Function) (Picture Mode) If you set the playback duration, the playback will stop This function reproduces optimum playback picture from automatically. various kind of recorded tapes and contents. After the set playback time has elapsed, the VCR automatically stops playback and switches off. Press the PICTURE MODE button 5 and select the corresponding Picture Mode as follows. To Activate the Playback Of
Inhaltszusammenfassung zur Seite Nr. 16
To Display the Approximate Remaining Recording Tape Time The remaining tape time can be displayed in the VCR display. Preparations 1 Select [TAPE SELECT] from the on screen display and – Confirm that the VCR is on. select the corresponding video cassette tape length. – Confirm that the TV is on and the VCR viewing channel is See page 13. selected. – Set the VCR/TV switch E to [VCR]. 2 Press the DISPLAY button > repeatedly until the Remaining Tape Time appears on the VCR display. Operations Clo
Inhaltszusammenfassung zur Seite Nr. 17
To Immediately Record the Same Scenes of To Select the Recording Duration and Programme That You Are Viewing on the Perform Timer Recording (OTR Recording) OTR means One-Touch Recording and is called this way, TV (Direct Recording) because you can start recording and select the recording This function allows you to immediately start recording the duration by repeatedly pressing a single button. This is very same scenes of programme that you are viewing on the TV. convenient, for example when you
Inhaltszusammenfassung zur Seite Nr. 18
Operations Recording from an external source This function can be used to make up an edited tape from 1 Press the Play button 7 to start playback. other recordings or video sources. A new scene can be added to the end of previous one. 2 At the point where you want to join a new scene, press the Pause/Slow button J to put it in the still playback AV1 (AUDIO IN h / VIDEO IN d) mode. AV2 (AUDIO IN ] / VIDEO IN \) 3 Press the REC button I to put it in the recording pause Recording VCR mode. POW
Inhaltszusammenfassung zur Seite Nr. 19
5 Press the OFF button C to set the Timer Recording ending time. CH DATE ON OFF 2 27SA 20:02 21:30 SP 4-Key Programming CATEGORY Up to 16 timer programmes, including weekly and daily programmes, can be recorded up to one month in advance 6 Press the SPEED button B to set the desired tape by setting the timer. speed. – SP provides standard recording Preparations time, optimum picture and sound CH DATE ON OFF – Confirm that the VCR is on. quality. 2 27SA 20:02 21:30 LP – Confirm that the TV is on
Inhaltszusammenfassung zur Seite Nr. 20
To Suspend the Timer Recording Standby Programming a Timer Recording of a TV Mode Programme Until its End When you want to use the VCR for playback, normal (Tape Speed Auto Change Function ) recording or some other operation before the programmed If the VCR determines that the remaining tape time is timer recording will be performed, you can temporarily insufficient to record the programme to its end during a timer suspend the timer recording standby mode by pressing the recording performed in t
