Inhaltszusammenfassung zur Seite Nr. 1
User Guide
QIP27xx Series
Set-Top T erminals
Standard- Definition
Watch and Record DVR
Inhaltszusammenfassung zur Seite Nr. 2
CAUTION RISK OF ELECTRIC SHOCK CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Graphical symbols and supplemental warning marking locations on bottom of terminal. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION TO PREVENT ELECTRICAL SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE
Inhaltszusammenfassung zur Seite Nr. 3
IMPORTANT SAFETY INSTRUCTIONS 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9 Do not defeat the safety purpose of the
Inhaltszusammenfassung zur Seite Nr. 4
Regulatory Information Federal Communications Commission Radio and Television Interface Statement for a Class ‘B’ Device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in the residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance wi
Inhaltszusammenfassung zur Seite Nr. 5
Software License IMPORTANT: PLEASE READ THIS SOFTWARE LICENSE (“LICENSE”) CAREFULLY BEFORE YOU USE ANY SOFTWARE, FIRMWARE AND RELATED DOCUMENTATION (“SOFTWARE”) PROVIDED WITH MOTOROLA’S DIGITAL CABLE RECEIVER OR HOME THEATER SYSTEM (EACH SHALL BE REFERRED TO IN THIS LICENSE AS A “RECEIVER”). BY USING THE RECEIVER AND/OR USING ANY OF THE SOFTWARE, YOU INDICATE YOUR ACCEPTANCE OF EACH OF THE TERMS OF THIS LICENSE. UPON ACCEPTANCE, THIS LICENSE WILL BE A LEGALLY BINDING AGREEMENT BETWEEN Y
Inhaltszusammenfassung zur Seite Nr. 6
Contact Us For technical support of your set-top, call Motorola Support at 1-866-668-2271 or 1-866-MOT-BCS1. For questions about your TV service, call your local service provider. For Motorola consumer products, education, and support: http://www.motorola.com/broadband ___________________________________________________________________________________ Copyright © 2006 by Motorola, Inc. All rights reserved. No part of this publication may
Inhaltszusammenfassung zur Seite Nr. 7
QIP27xx User Guide CONTENTS Introduction .............................................................................................3 QIP27xx — Front and Back Panels.................................................4 Front Panel .................................................................................4 Front Panel Description ...................................................................4 Back Panel ........................................................................
Inhaltszusammenfassung zur Seite Nr. 8
Connecting your Set-Top to a Stereo TV and Stereo VCR ...............19 Connecting a Stereo TV and Stereo VCR.....................................20 Connecting your Set-Top to an A/V Receiver, TV, and VCR.............21 Connecting an A/V Receiver, TV, and VCR..................................22 Data Devices..........................................................................................23 Data Features...........................................................................
Inhaltszusammenfassung zur Seite Nr. 9
QIP27xx User Guide INTRODUCTION Congratulations on receiving a Motorola QIP27xx Series Standard-Definition Set-top Terminal. This product will enable you to enjoy the outstanding quality of all-digital audio and video, as offered in either standard-definition formats. In addition, the QIP27xx offers full DVR functionality to record and play back the shows you want to watch. With its second tuner, the QIP27xx also allows “watch and record” capabilities so you can really take control o
Inhaltszusammenfassung zur Seite Nr. 10
L R E O N N S QIP27xx — Front and Back Panels Front Panel 1 2 3 4 5 6 7 8 INFO OPTION P MSGS. RECORD MENU GUIDE ON REMOTE MUTE POWER SELECT SD / DVR QIP6400 9 10 11 12 13 Front Panel Description Item Description 1 INFO switch — Displays current channel and program information 2 MENU switch — Displays the menu area 3 POWER switch — Turns the QIP27xx on or off 4 MSGS. indicator — Is lit when a message is waiting 5 RECORD indicator — Is lit when the DVR is recording (QIP27xx mo
Inhaltszusammenfassung zur Seite Nr. 11
QIP27xx User Guide Back Panel Back Panel Description Item Description 1 RF IN — Connects to digital TV input from your service provider 2* IR — Enables QIP27xx to control a VCR while recording a selected program (not supported by all program guides) 3 SMART CARD — Supports Smart Card interface (currently not enabled) 4 SPDIF (coaxial) — Provides Dolby® Digital 5:1 audio (surround sound) or PCM audio 5 S-VIDEO — Connects to S-Video input of TV or VCR 6* VIDEO OUT — Delive
Inhaltszusammenfassung zur Seite Nr. 12
OPERATION Turning Power On and Off Press POWER on the front panel to turn the set-top on or off. When using the remote control, be sure you press CABLE before pressing POWER. Changing Channels You can change channels in two ways: • Press CHANNEL or on the front panel of the set-top, or press CHANNEL + or – on the remote control to step through the channel selection. • Enter the number of the channel you wish to view using the number keys on the remote control. Adjusting the Vo
Inhaltszusammenfassung zur Seite Nr. 13
QIP27xx User Guide DIGITAL VIDEO RECORDER (DVR) – QIP27XX MODELS ONLY The QIP27xx is equipped with an internal hard drive for digital video recording of standard definition TV (SDTV) programs. Storage time depends on the video format of the received program. What is DVR? DVR, which stands for digital video recorder, records and plays digital video using hard-disk drive technology. Unlike an analog cassette tape, the QIP27xx's hard drive allows recording and playback to occur simul
Inhaltszusammenfassung zur Seite Nr. 14
Simultaneously Record Two Shows Record two programs from two different channels at the same time Simultaneously Record Shows and Watch a Recorded Program Watch a program recorded on your QIP27xx while recording up to two other programs at the same time. You can also easily switch between viewing the pre-recorded program and either of the programs that you are recording. Refer to your service provider’s instructions for the menu-driven recording and viewing options available on
Inhaltszusammenfassung zur Seite Nr. 15
QIP27xx User Guide This screen appears if the HDMI port is not active: USER SETTINGS TV TYPE 16:9 (4.3 LETTERBOX, 4:3 PAN/SCAN) 4:3 OVERRIDE 480i (480p, STRETCH, OFF) CLOSED CAPTION DISABLED SERVICE SELECTION ANALOG CC1 DIGITAL PRIMARY LANGUAGE FONT SIZE AUTO FONT STYLE AUTO FONT COLOR AUTO FONT OPACITY AUTO FONT EDGE TYPE AUTO FONT EDGE COLOR AUTO BACKGROUND COLOR AUTO BACKGROUND OPACITY AUTO SETTINGS AUTO RESTORE ALL DEFAULTS 1 Use the remo
Inhaltszusammenfassung zur Seite Nr. 16
User Settings Setting Description TV TYPE Sets the aspect ratio. The front panel display indicates the type you select. The default is 16:9. Options are 16:9 for wide screen TVs, or 4:3 LETTERBOX or 4:3 PAN/SCAN for standard TVs: • 4:3 LETTERBOX fits wide screen programming on the screen by placing black bars at the top and bottom. • 4:3 PAN/SCAN fills the screen by cropping the left and right edges of wide screen programming. 4:3 OVERRIDE Sets the display format for 4:3 stand
Inhaltszusammenfassung zur Seite Nr. 17
QIP27xx User Guide Setting Description FONT COLOR Sets the font color for closed captions — AUTO, WHITE, BLACK, RED, GREEN, BLUE, YELLOW, MAGENTA, or CYAN. The default is AUTO. FONT OPACITY Sets the opacity for closed captions — AUTO, TRANSPARENT, TRANSLUCENT, SOLID, or FLASHING. The default is AUTO. FONT EDGE Sets the edge appearance for closed captions — AUTO, TYPE NONE, RAISED, DEPRESSED, UNIFORM, LEFT SHADOWED, or RIGHT SHADOWED. The default is AUTO. FONT EDGE Sets the ed
Inhaltszusammenfassung zur Seite Nr. 18
ON-SCREEN GRAPHICS The QIP27xx can generate graphics that overlay the video programming or fill the entire television screen. Common examples include on-screen menus (such as the User Setting menu), closed captions, and electronic program guides. The QIP27xx overlays these graphics whenever you open a menu, enable closed captions, or scroll through a program grid. CONNECTING YOUR SET-TOP This section describes how to connect the QIP27xx set-top to your home entertainment system.
Inhaltszusammenfassung zur Seite Nr. 19
L R E O N N S QIP27xx User Guide Important Safety Considerations VENTILA TE 2 inches 2 2 inches inches INFO OPTION P MSGS. RECORD MENU GUIDE ON REMOTE MUTE POWER SELECT SD/DVR QIP6400 Follow these important safety guidelines when positioning and connecting the set-top: • Position the set-top with at least two inches of space above and on all sides. • Do not block the slots and openings on the set-top. • Do not place anything on top of the set-top. • Do not position the set-top in a
Inhaltszusammenfassung zur Seite Nr. 20
Video Connection Options The QIP27xx offers Composite video, S-video, and RF coaxial connections to allow you to view standard definition TV programming Use these guidelines to determine the best video connection for your home entertainment system, and then refer to the table that follows for specific procedures that apply to specific setups. • S-Video — SDTV If component video connections are not available on your TV, use the S-VIDEO connection. • Video (also referred to as com
