Inhaltszusammenfassung zur Seite Nr. 1
OPERATOR’S MANUAL
English version 1.0
DHU500 SERIES
MPEG4 Networkable DVR
Copyright „ 2007 Digimerge Technologies Inc.
Inhaltszusammenfassung zur Seite Nr. 2
Thank You PREFACE Thank Thank you for purchasing the DHU500 Series DVR. Digimerge is committed to providing our customers with a high quality, reliable security product. The DHU500 Series line of Pentaplex Network DVR’s offer a full-featured Networkable video recording solution. Record in Real Time with 120 fps recording capability. Images can be easily transferred using the built in CDRW optical drive or USB flash drive. The system can be viewed and controlled over the internet from a rem
Inhaltszusammenfassung zur Seite Nr. 3
Important Safeguards PREFACE Important Safeguards In addition to the careful attention devoted to quality standards in the manufacture process of your video product, safety is a major factor in the design of every instrument. However, safety is your responsibility too. This sheet lists important information that will help to assure your enjoyment and proper use of the video product and accessory equipment. Please read them carefully before operating and using your video product. Installation
Inhaltszusammenfassung zur Seite Nr. 4
Important Safeguards PREFACE Service Use 13. Servicing - Do not attempt to service this video 19. Cleaning - Unplug the video product from the wall equipment yourself as opening or removing covers outlet before cleaning. Do not use liquid cleaners or may expose you to dangerous voltage or other aerosol cleaners. Use a damp cloth for cleaning. hazards. Refer all servicing to qualified service personnel. 20. Product and Cart Combination - Video and cart combination should be moved with care.
Inhaltszusammenfassung zur Seite Nr. 5
General Precautions PREFACE NOTE This equipment has been certified and found to comply with the limits regulated by FCC, EMC, and LVD. Therefore, it is designated to provide reasonable protection against interference and will not cause interference with other appliance usage. However, it is imperative that the user follows this manuals guidelines to avoid improper usage which may result in damage to the unit, electrical shock and fire hazard injury In order to improve the feature functions an
Inhaltszusammenfassung zur Seite Nr. 6
Table of Contents TOC Table of Contents Section 1 - Location and Control DHU500 Series - Front .................................................................... 8 DHU500 Series - Back ................................................................... 10 Section 2 - Remote Control..................................................................... 14 Section 3 - Operating the DVR ............................................................... 15 Starting the DVR - Self Test Screens ........
Inhaltszusammenfassung zur Seite Nr. 7
SECTION 1 LOCATION AND CONTROL DHU500 Series - Front View...................... 8 DHU500 Series - Rear View .................... 10
Inhaltszusammenfassung zur Seite Nr. 8
DHU500 Series - Front SECTION 1 DHU500 Series - Front 12 3 4 5 6789 10 11 12 1314 15 1. POWER - Turns the DVR unit ON/OFF. 2. CDRW DRIVE - Drive bay for CD-RW Drive 3. LED POWER AND HDD LIGHTS - Indicates unit power and HDD activity 4. NUMBER / LETTER PAD � Use the numbers to switch between cameras in View mode. � Use the Numbers and Letters for Menu data input. 5. SCREEN SELECT / MENU NAVIGATION - Performs a dual purpose: � Changes the Camera view to Single, 4 Camera, 9 Camera or 16 Camera vie
Inhaltszusammenfassung zur Seite Nr. 9
DHU500 Series - Front SECTION 1 12 3 4 5 6789 10 11 12 1314 15 9. PLAY/FWD - Starts the playback of a previously recorded event. If the PLAY/FF button is pressed during playback, the FAST FORWARD option will become active. 10. REC - Manually starts/stops recording of the currently displayed camera. 11. VOLUME UP / DOWN - Raises and Lowers the system volume. 12. AUDIO - Switches between cameras 1-4 to receive audio * Only one channel audio available on the 4-Channel DVR Model. 13. MENU - Acces
Inhaltszusammenfassung zur Seite Nr. 10
DHU500 Series - Back SECTION 1 DHU500 Series - Back 12 345 678 910 11 1. BNC VIDEO INPUTS - Video inputs for direct connection to Cameras or for looping input to a DVR. The number of ports will vary based on the DVR model (4 Channel, 8 Channel or 16 Channel). 2. AC INPUT - Connect the AC power using the power cord provided with the unit from the DVR to an electrical outlet. 3. COMPOSITE - A Composite Video OUT connection used to connect the DVR to a Slave Monitor or DVR. 4. S-VIDEO - Outgoi
Inhaltszusammenfassung zur Seite Nr. 11
DHU500 Series - Back SECTION 1 78910 11 7. AUDIO OUT - Connect the Audio OUT to the AUDIO IN on an DVR or Monitor. 8. RS232 PORT - Connection for an RS-232 Device. * Not available on 4-Channel DVR Model. 9. ETHERNET PORT - Connects the DVR to a router for connection to the internet. Refer to the Instructions on Page 51 for Remote Connection. 10. NTSC/PAL SWITCH - Changes the DVR unit between NTSC and PAL modes. 11. ALARM / SENSOR BLOCK - Ports for connecting an Alarm or Sensor Device (such as a
Inhaltszusammenfassung zur Seite Nr. 12
Inhaltszusammenfassung zur Seite Nr. 13
SECTION 2 REMOTE CONTROL Remote Control........................................14
Inhaltszusammenfassung zur Seite Nr. 14
Remote Control SECTION 2 Remote Control Listed below is a quick reference for the Remote Control. For details on specific features, refer to the DHU500 Series - Front Panel features on Pages 10-11 REC - Starts/Stops POWER BUTTON - Manual Recording Turns the DVR ON PTZ - Accesses the Pan/Tilt/Zoom Setup menu NUMBER PAD - Control for Cameras OSD - Configures the 1-16 & used for On Screen Display adding information in settings the Menu system. SEQ - Sets camera display to Sequence INFO
Inhaltszusammenfassung zur Seite Nr. 15
SECTION 3 OPERATING THE DVR Starting the DVR - Self Test Screens.......16 Starting the DVR - QUAD Display ............16 Powering Off the DVR ..............................16 Main Menu Control ...................................17 Event Search Funstion .............................18 Accessign the DVR Locally/Remotely ......22 Web Client Software.................................24 Web Client - Main Window .......................25
Inhaltszusammenfassung zur Seite Nr. 16
Starting the DVR - Self Test Screens SECTION 3 Starting the DVR - Self Test Screens Once the DVR has been connected and powered on, the following self-test screens will appear: LOADING PROGRAMS ...... CHECKING HDD INTEGRITY ...... INITIALIZING DEVICES ... NOTE: If a new HARD DRIVE is detected by the system, the DVR will automatically FORMAT the new drive. Starting the DVR - QUAD Display After the system self-tests have been completed, the DVR will switch to the CAMERA viewing screens (in QU
Inhaltszusammenfassung zur Seite Nr. 17
Main Menu Control SECTION 3 Main Menu Control � Enter the MENU screen by pressing the MENU button. The System Password may be required, based on system settings. � Scroll through the 5 Main options by pressing the buttons. � To enter a sub-menu, navigate to the option and press the SEL button. � To exit a SUBMENU, press the MENU button. To save the changes, select the SAVE & EXIT option and press the SEL button. � Pressing the MENU button from the MAIN MENU will exit the MENU configuration
Inhaltszusammenfassung zur Seite Nr. 18
Event Search Function SECTION 3 Event Search Function The Event Search function is used to locate previously recorded events (Motion, Sensor or Manual Event recording), and to view a list of logged system events. Press the SEARCH button located on the front panel of the DVR to access the Event Search Menu. ALL Search Date/Time Search Event: Internal HDD: 01-01-2006 01:01:01 Date: PLAY Calendar Search Year: 2006 Month: 1 SUN MON TUE WED THU FRI SAT _____________________________ 1 2 3 4 5 6 7 8
Inhaltszusammenfassung zur Seite Nr. 19
Event Search Function SECTION 3 Date / Time Search Search and play previously recorded events by Date, Time and Event type. Date/Time Search ALL Event: Internal HDD: 01-01-2006 01:01:01 Date: PLAY 1. EVENT: Select an event type - Alarm, Motion or All. Press the and buttons to highlight, and press buttons to select an event type. 2. HDD: Select a Hard Drive (if multiple drives are available). Press the and buttons to highlight, and press buttons to select a Hard Drive type. 3. DATE: Sele
Inhaltszusammenfassung zur Seite Nr. 20
Event Search Function SECTION 3 Backup Menu A USB Memory Stick can be connected to the front panel of the DVR, and is used as a backup device or to upgrade the Firmware on the DVR. Backup to USB / CDRW 1. Insert the USB Memory Stick into the DVR or place a CD in the CDRW Drive, then choose the Backup Menu from the Search Function. NOTE: The Memory Stick should be Formatted on a PC prior to copying data from the DVR Unit. 2. Press the Search Button on the front panel of the DVR. Select the Ba
