Inhaltszusammenfassung zur Seite Nr. 1
RC7610MC_NA1ULZ_40H_ENG
Installation and Operating Guide | Warranty
Model Number | ZRY-316 | VCR / DVD Recorder
For service/
support Call:
Toll Free Number
1-800-243-0000
© Copyright 2005, LG Electronics U.S.A., Inc.
Inhaltszusammenfassung zur Seite Nr. 2
REGULATORY INFORMATION: FCC Part 15 CAUTION This epuipment has been tested and found to comply with RISK OF ELECTRIC SHOCK the limits for a Class B digital device, pursuant to Part 15 DO NOT OPEN of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when CAUTION: TO REDUCE THE RISK the product is operated in a residential installation. This OF ELECTRIC SHOCK product generates, uses, and can radiate radio frequency DO NOT REMOVE COVER (OR BACK)
Inhaltszusammenfassung zur Seite Nr. 3
IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following procedures for installa- tion, use, and servicing. This product does not contain any
Inhaltszusammenfassung zur Seite Nr. 4
Disc Settings . . . . . . . . . . . . . . . . . . . . . .23-24 INTRODUCTION • Initialize . . . . . . . . . . . . . . . . . . . . . . . . .23 • Finalize . . . . . . . . . . . . . . . . . . . . . . . . .24 Symbol Used in this Manual . . . . . . . . . . . . . .6 • Disc Label . . . . . . . . . . . . . . . . . . . . . . .24 About the Symbol Display . . . . . . . . . . . . .6 • Disc Protect . . . . . . . . . . . . . . . . . . . . . .24 Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . .6 •
Inhaltszusammenfassung zur Seite Nr. 5
RECORDING About DVD recording . . . . . . . . . . . . . . . . . .33 Disc types and recording formats, modes, and settings . . . . . . . . . . . . . . . . . . .33 Notes for recording . . . . . . . . . . . . . . . . . . . .33 Basic Recording from a TV . . . . . . . . . . . . . .34 Instant Timer Recording . . . . . . . . . . . . . . . .34 Checking the Recording Time . . . . . . . . . . . .34 To Extend the Recording Time . . . . . . . . . . .34 To Pause the Recording . . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 6
Introduction To ensure proper use of this product, please read this About the Symbol Display owner’s manual carefully and retain for future refer- “ ” may appear on your TV display during opera- ence. tion and indicates that the function is not permitted by this unit or the disc. Symbol Used in this Manual Indicates hazards likely to cause harm to the unit itself or other material damage. Notes on Discs Handling Discs Note: Indicates special notes and operating fea- Do not touch the playback sid
Inhaltszusammenfassung zur Seite Nr. 7
Recordable and Playable Discs DVD-RW (DVD - ReWritable) DVD-RW discs can be formatted for VR mode recording or Video mode recording. These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again on the same Disc. [VR mode] Recordings can be extensively edited Playable only on VR mode compatible players (after finalization) [Video mode] Playable on regular DVD players (after finalization) Limited editing features DVD-R (DVD - Recordable) These Discs can be
Inhaltszusammenfassung zur Seite Nr. 8
Playable Discs DVD (8 cm / 12 cm disc) Discs such as movies that can be purchased or rented Audio CD (8 cm / 12 cm disc) Music CDs or CD-Rs/CD-RWs in music CD format that can be purchased CD-R/CD-RW (8 cm / 12 cm disc) CD-R/CD-RW discs that contain audio titles, MP3, WMA or JPEG files. Notes: • Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be played on the unit. • Do not attach any seal or label to eith
Inhaltszusammenfassung zur Seite Nr. 9
Restrictions on video recording Notice for Progressive Scan Use •You cannot record copy-protected video using this CONSUMERS SHOULD NOTE THAT NOT ALL recorder. Copy-protected video includes DVD- HIGH DEFINITION TELEVISION SETS ARE FULLY Video discs and some satellite broadcasts. If COMPATIBLE WITH THIS PRODUCT AND MAY copy-protected material is encountered during a CAUSE ARTIFACTS TO BE DISPLAYED IN THE recording, recording will pause or stop automati- PICTURE. IN CASE OF 525 PROGRESSIVE SCAN ca
Inhaltszusammenfassung zur Seite Nr. 10
Title (DVD video discs only) Disc-related terms A title is generally a distinct section of a DVD disc. For example the main feature could be title 1, a docu- DVD ±R / DVD ±RW mentary describing how the film was made could be DVD -R and DVD +R are two different standards for title 2, and cast interviews could be title 3. Each title recordable DVD drives and discs. This format allows is assigned a reference number enabling you to information to be recorded onto the DVD disc only locate it easily.
Inhaltszusammenfassung zur Seite Nr. 11
Front Panel ab c d e fghijklmno a POWER button and indicator h Remote Sensor Switches the Recorder ON and OFF. Point the Recorder Remote Control here. Lights green when the Recorder is turned on. i DVD/VCR indicator Indicates the active DVD or VCR deck. b Disc Tray (DVD deck) Insert a disc here. j DVD/VCR c Z OPEN/CLOSE Toggles control between the DVD deck and the Opens or closes the disc tray. VCR deck. d Cassette Compartment (VCR deck) k z (REC) button Insert a video cassette here. Starts rec
Inhaltszusammenfassung zur Seite Nr. 12
Function Display Window REC PRG TTL VR TV CHP TRK DUB Hi-Fi ST SAP DVD AB Indicates the type of disc loaded. Indicates that a DVD to VCR (or DVD DUB VCR to DVD) dubbing is in progress. Indicates when the Recorder is Indicates repeat mode. AB Locked. Indicates when the recorder is in Indicates when the Recorder is timer recording or a timer recording Hi-Fi playing is programmed. a tape in Hi-Fi. The recorder is recording. Indicates a stereo broadcast is REC ST being received. Programmed playbac
Inhaltszusammenfassung zur Seite Nr. 13
Remote Control BACKWARD / FORWARD z REC Starts recording. Press repeatedly to (m/M) set the recording time. - DVD: Search backward or forward. - VCR: Rewinds/Advances the tape REC MODE during the STOP mode, for fast Selects the recording mode: reverse/ forward picture search. - DVD : SP, LP, EP or XP. - VCR : SP or SLP. CHP. ADD Inserts a chapter marker when playing/ RETURN (O) recording. Removes the menu. CH/TRK(v/V): Selects a program. STOP (x) Adjusts manually the tape’s picture Stops playba
Inhaltszusammenfassung zur Seite Nr. 14
Rear Panel ab cdef g hijk a ANT.IN f AUDIO OUT (Left/Right) Connect the antenna to this terminal. Connect to a TV or other equipment with audio inputs. b AC Power Cord Plug into the power source. g Cooling fan c AV 1 IN (VIDEO IN /AUDIO IN (Left/Right)) h RF. OUT Connect the audio/video output of an external Connect to a TV with RF coaxial inputs. source (Audio system, TV/Monitor, VCR, i OPTICAL (DIGITAL AUDIO OUT jack) Camcorder). Connect to digital (optical) audio equipment. d AV OUT (VIDEO
Inhaltszusammenfassung zur Seite Nr. 15
To view or record a CATV channel Connecting an Antenna Connecting an Antenna 1. Tune the TV to the Recorder output channel (CH or Cable TV or Cable TV 3 or 4). 2. Set the Recorder channel selector to the cable a a Antenna: output channel. (Example: CH3) Disconnect the antenna from the rear of the TV and identify the antenna cable. If it is a round 75 ohm 3. Select a channel using the cable converter. coaxial cable connect it directly to the jack marked ANT.IN on your Recorder. If your antenna
Inhaltszusammenfassung zur Seite Nr. 16
RF coaxial connection Notes: Connect the RF.OUT jack on the Recorder to the • Set Progressive Scan option to [ON] in the setup menu, antenna in jack on the TV using the supplied 75-ohm see page 20. Coaxial Cable (R). • Progressive Scan does not work with the RF, Audio/Video or S-Video connections. How to set the Recorder’s RF output channel • If your TV does not accept the Progressive Scan format, the picture may appear scrambled or no picture at all. 1. When the Recorder is turned off, press an
Inhaltszusammenfassung zur Seite Nr. 17
Connecting to an amplifier equipped with two chan- Accessory Audio/Video (A/V) Connections to nel digital stereo (PCM) or to an Audio/Video receiv- Recorder er equipped with a multi-channel decoder (Dolby Connect the AV 1 IN or AV 2 IN jacks on the Digital™, MPEG 2, or DTS) Recorder to the audio/video out jacks on your acces- 1. Connect one of the Recorder’s DIGITAL AUDIO sory component, using the optional audio/video OUT jacks ( OPTICAL O, COAXIAL X) to the cor- cables. (Refer to page 37 for [R
Inhaltszusammenfassung zur Seite Nr. 18
Auto Channel Set Initial Settings Initial Settings Connect the Recorder to the desired type of antenna In this menu system, there are several ways to cus- or cable TV system as shown on page 15. tomize the settings provided. Most menus consist of This Recorder is equipped with a frequency synthe- three levels to set up the options, but some require sized tuner capable of receiving up to 181 channels. greater depth for the variety of settings. These include VHF channels 2-13, UHF channels 14- 69
Inhaltszusammenfassung zur Seite Nr. 19
Clock Set TV Aspect 1. Select the [Clock Set] option. Selects the aspect ratio of the connected TV (4:3 2. Press B to move to the third level. standard or wide). Auto [4:3] Select this when connecting to a 4:3 screen The Auto option is set at the factory. In the Auto TV. When you select [4:3], set [Display Mode] option, the Recorder looks for a channel carrying below. XDS (Extended Data Services) information. XDS [16:9] Select this when connecting to a wide-screen updates the clock using the C
Inhaltszusammenfassung zur Seite Nr. 20
Progressive Scan Factory Set Progressive Scan Video provides the highest quality You can reset the Recorder to its original factory pictures with less flickering. settings. Some options cannot be reset (Rating, Set Password and Area Code). [ON] : Using the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks for connection to 1. Select the [Factory Set] option. a TV or monitor that is compatible with a 2. Press B to select [Set] then press ENTER. progressive scan signal. The Initialize menu will appear.
