Inhaltszusammenfassung zur Seite Nr. 1
2-109-225-13 (2) GB
DVD Player/
Video Cassette
Recorder
Operating Instructions
PAL
SLV-D930 GI
© 2004 Sony Corporation
Inhaltszusammenfassung zur Seite Nr. 2
WARNING Welcome! To prevent fire or shock Precautions Thank you for purchasing this hazard, do not expose the Safety Sony DVD Player/Video unit to rain or moisture. • This unit operates on 220 – Cassette Recorder. Before To avoid electrical shock, 240 V AC, 50 Hz. Check operating this player, please do not open the cabinet. that the unit’s operating read this manual thoroughly Refer servicing to voltage is identical with and retain it for future qualified personnel only. your l
Inhaltszusammenfassung zur Seite Nr. 3
Caution For use of the VCR Television programmes, films, video tapes and other materials may be copyrighted. Unauthorized recording of such material may be contrary to the provisions of the copyright laws. Also, use of this recorder with cable television transmission may require authorization from the cable television transmitter and/or programme owner. For use of the DVD player This product incorporates copyright protection technology that is protected by U.S. patents and other
Inhaltszusammenfassung zur Seite Nr. 4
Table of contents 2 WARNING 2 Welcome! 3 Caution 6 About this manual 6 This player can play the following discs 7 Notes about discs Getting Started 8 Step 1 : Unpacking 9 Step 2 : Setting up the remote commander 11 Step 3 : Connecting the DVD-VCR 14 Step 4 : Setting up the DVD-VCR with the Auto Set Up function 16 Step 5 : Selecting a language 17 Step 6 : Setting the clock 19 Step 7 : Presetting channels Basic Operations Advanced Hookups 27 Playing discs 52 A/V Receiver hookup 31 Guide
Inhaltszusammenfassung zur Seite Nr. 5
DVD Additional Operations 66 Using the DVD’s menu 68 Zooming into a scene 69 Changing the angles 70 Displaying the subtitle 71 Various play mode functions (Programme play, Shuffle play, Repeat play) 76 Changing the sound 77 Virtual surround setting 79 Playing an MP3 audio track 84 Playing JPEG image files 88 Playing VIDEO CDs with “PBC On/ Off” functions VCR Additional Operations 90 Quick Timer Recording 92 Recording stereo and bilingual programmes 94 Searching
Inhaltszusammenfassung zur Seite Nr. 6
About this manual This player can play the following discs This manual mainly explains operations using the remote, but the same operations can also be performed using the buttons on the Format of discs DVD-VCR having the same or similar names. DVD VIDEO “DVD” may be used as a general term for DVD VIDEOs, DVD-RWs/DVD-Rs, and DVD+RWs/DVD+Rs. DVD-RW The meaning of the icons used in this manual is described below: Icon Meaning VIDEO CD Functions available for DVD VIDEOs and DVD-RWs/
Inhaltszusammenfassung zur Seite Nr. 7
Example of discs that the player Note on playback operations of cannot play DVDs and VIDEO CDs The player cannot play the following discs: Some playback operations of DVDs and VIDEO All CD-ROMs (including PHOTO CDs)/CD- CDs may be intentionally set by software Rs/CD-RWs other than those recorded in the producers. Since this player plays DVDs and following formats: VIDEO CDs according to the disc contents the – music CD format software producers designed, some playback – video CD format
Inhaltszusammenfassung zur Seite Nr. 8
Getting Started Step 1 : Unpacking Check that you have received the following items with the DVD-VCR: Remote commander Aerial cable R6 (size AA) batteries Audio cord (pinplug ×2 y pinplug ×2) Video cord (pinplug ×1 y pinplug ×1) Note The supplied remote commander is for the exclusive use of this DVD-VCR. 8 Unpacking
Inhaltszusammenfassung zur Seite Nr. 9
Getting Started Step 2 : Setting up the remote commander Inserting the batteries Insert two size AA (R6) batteries by matching the + and – on the batteries to the diagram inside the battery compartment. Insert the negative (–) end first, then push in and down until the positive (+) end clicks into position. Using the remote Remote sensor commander You can use this remote commander to operate this DVD- VCR and a Sony TV. Buttons on the remote commander marked with a dot () can be used
Inhaltszusammenfassung zur Seite Nr. 10
Controlling other TVs with the remote commander The remote commander is preprogrammed to control non-Sony TVs. If your TV is listed in the following table, set the appropriate manufacturer’s code number. Set TV / DVD·VIDEO at the top of the remote commander to TV. 1 Hold down ?/1, and enter your TV’s code number using the number buttons. 2 Then release ?/1. Now you can use the ?/1, VOL +/–, PROG +/–, MUTING*, TV/VIDEO, 0-9 and -/--* buttons to control your TV. You can also use the buttons
Inhaltszusammenfassung zur Seite Nr. 11
Getting Started Step 3 : Connecting the DVD-VCR Note that “Advanced Hookups” (page 52) explains additional hookup methods that will optimize the picture and sound for a true “hometheatre” experience. If your TV has a Scart (EURO-AV) connector, see page 12. If your TV does not have a Scart (EURO-AV) connector Mains lead to mains AERIAL IN Aerial cable (supplied) : Signal flow Disconnect the aerial cable from your TV 1 and connect it to on the rear panel of the DVD-VCR. Connect of the DVD-VCR
Inhaltszusammenfassung zur Seite Nr. 12
If your TV has a Scart (EURO-AV) connector LINE-1 Mains lead (EURO AV) to mains AERIAL IN Aerial cable (supplied) Scart (EURO-AV) Scart cable (not supplied) : Signal flow Disconnect the aerial cable from your 1 TV and connect it to on the rear panel of the DVD-VCR. Connect of the DVD-VCR and the 2 aerial input of your TV using the supplied aerial cable. Connect LINE-1 (EURO AV) on the 3 DVD-VCR and the Scart (EURO-AV) connector on the TV with the optional Scart cable. This connection
Inhaltszusammenfassung zur Seite Nr. 13
Getting Started Additional connections To a satellite or digital tuner with Line Through Using the Line Through LINE-3 function, you can watch LINE OUT programmes from a satellite or digital tuner connected to this DVD-VCR on the TV even when the DVD-VCR is turned off. When you turn on the satellite or digital tuner, this Scart cable (not supplied) DVD-VCR automatically sends : Signal flow the signal from the satellite or digital tuner to the TV without turning itself on. Connect the
Inhaltszusammenfassung zur Seite Nr. 14
Step 4 : Setting up the DVD-VCR with the Auto Set Up function Before using the DVD-VCR for the first time, set up the DVD-VCR using the Auto Set Up function. With this function, you can SET UP set TV channels, guide channels for the VIDEO Plus+ system, and DVD-VCR clock automatically. Before you start… To control the DVD-VCR, set TV / DVD·VIDEO to DVD·VIDEO on the remote (page 9). V/v/B/b ENTER Turn on your TV and set it to the video channel. 1 If your TV does not have a Scart (EURO-
Inhaltszusammenfassung zur Seite Nr. 15
Getting Started To cancel the Auto Set Up function Press SET UP. To change the RF channel If the picture does not appear clearly on the TV, change the RF channel on the DVD- VCR and TV. Select “Install” in the “OPTION” menu, then press V/v to select “Video Output CH.” Select the RF channel by pressing the B/b buttons and press ENTER. Then, tune the TV to the new RF channel so that a clear picture appears. Tip If you want to change the language for the on-screen display from the one preset
Inhaltszusammenfassung zur Seite Nr. 16
Step 5 : Selecting a language You can change the on-screen display SET UP language. Before you start… Turn on the DVD-VCR and your TV. To control the DVD-VCR, set TV / DVD·VIDEO to DVD·VIDEO on the remote (page 9). Set your TV to the video channel so that the signal from the player appears on the TV screen. If the DVD player is in play mode, you cannot display the setup menu. Stop the V/v DVD playback. ENTER Press SET UP, then press V/v to select SET UP OPTION 1 (OPTION) and pr
Inhaltszusammenfassung zur Seite Nr. 17
Getting Started Step 6 : Setting the clock You must set the time and date on the DVD- VCR to use the timer features properly. The Auto Clock Set function works only if a SET UP station in your area is broadcasting a time signal. Before you start… Turn on the DVD-VCR and your TV. To control the DVD-VCR, set TV / DVD·VIDEO to DVD·VIDEO on the V/v/B/b remote (page 9). ENTER Set your TV to the video channel so that the signal from the player appears on the TV screen. If the DVD player
Inhaltszusammenfassung zur Seite Nr. 18
Press b to select the minutes and set the CLOCK SET 4 minutes by pressing V/v. ENTER Time Date Year 18:30 1/JAN /2004 THU Auto Clock [ On ] V v B b ENTER RETURN SET UP Set the day, month, and year in sequence by CLOCK SET 5 pressing b to select the item to be set, and ENTER press V/v to select the digits, then press b. Time Date Year 18:30 28/SEP /2004 TUE Auto Clock [ On ] The day of the week is set automatically. Press b to select “Auto Clock.” V v B b ENTER RETURN SET UP P
Inhaltszusammenfassung zur Seite Nr. 19
Getting Started Step 7 : Presetting channels If some channels could not be preset using the Auto Set Up function, you can preset them manually. SET UP Before you start… Turn on the DVD-VCR and your TV. To control the DVD-VCR, set TV / DVD·VIDEO to DVD·VIDEO on the remote (page 9). Set your TV to the video channel so that the signal from the player appears on the V/v/B/b TV screen. ENTER If the DVD player is in play mode, you O RETURN cannot display the setup menu. Stop the DVD p
Inhaltszusammenfassung zur Seite Nr. 20
Press V/v to select the row which you want to MANUAL TUNING 4 preset, then press b. PR : 5 CH : – – – ENTER MFT : – To display other pages for programme NAME : – – – – positions 6 to 80, press V/v repeatedly. v V b B MEMORY : ENTER RETURN Press B/b repeatedly until the channel you MANUAL TUNING 5 want is displayed. PR : 5 CH : – – – ENTER MFT : – NAME : – – – – MEMORY : ENTER v V b B RETURN Press V/v to select “NAME,” then press b. MANUAL TUNING 6 PR : 5 CH :
