Inhaltszusammenfassung zur Seite Nr. 1
3-084-917-11 (1) GB
DVD Player/
Video Cassette
Recorder
Operating Instructions
PAL
SLV-D910N/R
© 2003 Sony Corporation
Inhaltszusammenfassung zur Seite Nr. 2
WARNING Welcome! To prevent fire or shock Thank you for purchasing this Precautions hazard, do not expose Sony DVD Player/Video Safety the unit to rain or Cassette Recorder. Before • This unit operates on 220 – moisture. operating this player, please 240 V AC, 50 Hz. Check read this manual thoroughly To avoid electrical shock, that the unit’s operating and retain it for future do not open the cabinet. voltage is identical with reference. Refer servicing to your local power supply.
Inhaltszusammenfassung zur Seite Nr. 3
Caution For use of the VCR Television programmes, films, video tapes and other materials may be copyrighted. Unauthorized recording of such material may be contrary to the provisions of the copyright laws. Also, use of this recorder with cable television transmission may require authorization from the cable television transmitter and/or programme owner. For use of the DVD player This product incorporates copyright protection technology that is protected by method claims of certain
Inhaltszusammenfassung zur Seite Nr. 4
Table of contents 2 WARNING 2 Welcome! 3 Caution 6 About this manual 6 This player can play the following discs 7 Notes about discs Getting Started 8 Step 1 : Unpacking 9 Step 2 : Setting up the remote commander 11 Step 3 : Connecting the DVD-VCR 14 Step 4 : Setting up the DVD-VCR with the Auto Set Up function 17 Step 5 : Selecting the TV system 19 Step 6 : Selecting a language 20 Step 7 : Setting the clock 22 Step 8 : Presetting channels 30 Setting the PAY-TV/Canal Plus decoder Basic Operations
Inhaltszusammenfassung zur Seite Nr. 5
DVD Additional Operations 66 Using the DVD’s menu 68 Zooming into a scene 69 Changing the angles 70 Displaying the subtitle 71 Various play mode functions (Programme play, Shuffle play, Repeat play) 75 Changing the sound 76 Virtual surround setting 78 Playing an MP3 audio track 82 Playing JPEG image files 86 Playing VIDEO CDs with “MENU ON/OFF” functions VCR Additional Operations 88 Playing a tape with SQPB function 89 Quick Timer Recording 91 Recording stereo and bilingual programmes 94 Se
Inhaltszusammenfassung zur Seite Nr. 6
Region code About this manual Your player has a region code printed on the back of the unit and only will play DVD VIDEO The meaning of the icons used in this manual is discs (playback only) labelled with identical described below: region codes. This system is used to protect Icon Meaning copyrights. Functions available for DVD VIDEOs and DVD-RWs/ ALL DVDs labelled will also play on this DVD-Rs in video mode or player. DVD+RWs/DVD+Rs Functions available for VIDEO If you try to play
Inhaltszusammenfassung zur Seite Nr. 7
Note Some DVD-RWs/DVD-Rs, DVD+RWs/DVD+Rs or Notes about discs CD-Rs/CD-RWs cannot be played on this player due to the recording quality or physical condition of the disc, or the characteristics of the recording device. To keep the disc clean, handle the disc by its Furthermore, the disc will not play if it has not been edge. Do not touch the surface. correctly finalized. For more information, see the operating instructions for the recording device. Note that discs created in the Packet
Inhaltszusammenfassung zur Seite Nr. 8
Getting Started Step 1 : Unpacking Check that you have received the following items with the DVD-VCR: Remote commander Aerial cable R6 (size AA) batteries Audio cord (pinplug ×2 y pinplug ×2) Video cord (pinplug ×1 y pinplug ×1) Note The supplied remote commander is for the exclusive use of this DVD-VCR. Check your model name The instructions in this manual are for the 2 models: SLV-D910N and SLV-D910R. Check your model name by looking at the rear panel of your DVD-VCR. SLV-D91
Inhaltszusammenfassung zur Seite Nr. 9
Getting Started Step 2 : Setting up the remote commander Inserting the batteries Insert two size AA (R6) batteries by matching the + and – on the batteries to the diagram inside the battery compartment. Insert the negative (–) end first, then push in and down until the positive (+) end clicks into position. Using the remote Remote sensor commander You can use this remote commander to operate this DVD- VCR and a Sony TV. Buttons on the remote commander marked with a dot () can be used
Inhaltszusammenfassung zur Seite Nr. 10
Controlling other TVs with the remote commander The remote commander is preprogrammed to control non-Sony TVs. If your TV is listed in the following table, set the appropriate manufacturer’s code number. Set TV / DVD·VIDEO at the top of the remote commander to TV. 1 Hold down ?/1, and enter your TV’s code number using the number buttons. 2 Then release ?/1. Now you can use the ?/1, VOL +/–, PROG +/–, MUTING*, TV/VIDEO, 0-9 and -/--* buttons to control your TV. You can also use the buttons
Inhaltszusammenfassung zur Seite Nr. 11
Getting Started Step 3 : Connecting the DVD-VCR Note that “Advanced Hookups” (page 52) explains additional hookup methods that will optimize the picture and sound for a true “hometheatre” experience. If your TV has a Scart (EURO-AV) connector, see page 12. If your TV does not have a Scart (EURO-AV) connector Mains lead AERIAL IN to mains Aerial cable (supplied) : Signal flow Disconnect the aerial cable from your TV 1 and connect it to on the rear panel of the DVD-VCR. Connect of the DVD-VC
Inhaltszusammenfassung zur Seite Nr. 12
If your TV has a Scart (EURO-AV) connector LINE-1 Mains (EURO AV) lead AERIAL IN to mains Aerial cable (supplied) Scart (EURO-AV) Scart cable (not supplied) : Signal flow Disconnect the aerial cable from your 1 TV and connect it to on the rear panel of the DVD-VCR. Connect of the DVD-VCR and the 2 aerial input of your TV using the supplied aerial cable. Connect LINE-1 (EURO AV) on the 3 DVD-VCR and the Scart (EURO-AV) connector on the TV with the optional Scart cable. This connection
Inhaltszusammenfassung zur Seite Nr. 13
Getting Started Additional connection To a satellite or digital tuner with Line Through Using the Line Through LINE-3 function, you can watch LINE OUT programmes from a satellite or digital tuner connected to this DVD-VCR on the TV even when the DVD-VCR is turned off. When you turn on the satellite or digital tuner, this Scart cable (not supplied) DVD-VCR automatically sends : Signal flow the signal from the satellite or digital tuner to the TV without turning itself on. Connect the
Inhaltszusammenfassung zur Seite Nr. 14
Step 4 : Setting up the DVD-VCR with the Auto Set Up function Before using the DVD-VCR for the first time, set up the DVD-VCR using the Auto Set Up function. With this function, you can SET UP set TV channels, and DVD-VCR clock automatically. V/v/B/b ENTER Turn on your TV and set it to the video channel. 1 If your TV does not have a Scart (EURO-AV) connector, tune the TV to channel 32 (the initial RF channel for this DVD-VCR). Refer to your TV manual for TV tuning instructions. If the
Inhaltszusammenfassung zur Seite Nr. 15
Getting Started Press V/v to select the desired language, then COUNTRY SELECTION 3 press ENTER repeatedly. A NL S PL ENTER B I CH CZ DK N TR B Others The “COUNTRY SELECTION” menu appears. FIN P GR D E HU V v B b RETURN SET UP ENTER The abbreviations of the countries are as follows: Abbreviation Country Abbreviation Country A Austria ESpain B Belgium S Sweden DK Denmark CH Switzerland FIN Finland TR Turkey DGermany GR Greece NL Netherlands HU Hungary I Italy PL Poland N Norway CZ Czech P Port
Inhaltszusammenfassung zur Seite Nr. 16
To cancel the Auto Set Up function Press SET UP. To change the RF channel If the picture does not appear clearly on the TV, change the RF channel on the DVD- VCR and TV. Select “Install” in the “OPTION” menu, then press V/v to select “Video Output CH”. Select the RF channel by pressing the B/b buttons and press ENTER. Then, tune the TV to the new RF channel so that a clear picture appears. Tip If you want to change the language for the on-screen display from the one preset in the Auto S
Inhaltszusammenfassung zur Seite Nr. 17
Getting Started Step 5 : Selecting the TV system You must select the appropriate TV system SET UP for your area. Before you start… Turn on the DVD-VCR and your TV. To control the DVD-VCR, set TV / DVD·VIDEO to DVD·VIDEO on the remote (page 9). Set your TV to the video channel so that the signal from the player appears on the V/v/B/b TV screen. ENTER If the DVD player is in play mode, you cannot display the setup menu. Stop the DVD playback. SET UP Press SET UP, then press V/v to
Inhaltszusammenfassung zur Seite Nr. 18
Press SET UP to exit the menu. SET UP 4 18 Selecting the TV system
Inhaltszusammenfassung zur Seite Nr. 19
Getting Started Step 6 : Selecting a language You can change the on-screen display SET UP language. Before you start… Turn on the DVD-VCR and your TV. To control the DVD-VCR, set TV / DVD·VIDEO to DVD·VIDEO on the remote (page 9). Set your TV to the video channel so that the signal from the player appears on the V/v/B/b TV screen. ENTER If the DVD player is in play mode, you cannot display the setup menu. Stop the DVD playback. Press SET UP, then press V/v to select SET UP OPTI
Inhaltszusammenfassung zur Seite Nr. 20
Step 7 : Setting the clock You must set the time and date on the DVD- SET UP VCR to use the timer features properly. The Auto Clock Set function* works only if a station in your area is broadcasting a time signal. * SLV-D910N only Before you start… Turn on the DVD-VCR and your TV. V/v/B/b To control the DVD-VCR, set TV / ENTER DVD·VIDEO to DVD·VIDEO on the remote (page 9). Set your TV to the video channel so that the signal from the player appears on the TV screen. If the DVD playe
