Inhaltszusammenfassung zur Seite Nr. 1
QD-MultiDrive
Series
User’s Manual
www.microboards.com Version 1.3
Inhaltszusammenfassung zur Seite Nr. 2
2
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents Introduction................................................................................................................................5 Unpacking your system .............................................................................................................5 Installation..................................................................................................................................5 Basic Instructions.........................................
Inhaltszusammenfassung zur Seite Nr. 4
4
Inhaltszusammenfassung zur Seite Nr. 5
Introduction The QD-MultiDrive Series includes the QD-123, QD-125, and QD-127. Each is a high speed, low cost CD Recordable duplication system from Microboards Technology, LLC. The QD-MultiDrive is perfect for any user requiring easy copying of audio, video, or Data CDs. Superior technology allows the QD-MultiDrive to ship without a hard drive. LED indicators provide the user with status of the duplication process, minimizing the number of faulty discs. Current high speed CD Recordable t
Inhaltszusammenfassung zur Seite Nr. 6
Hardware Description Controller Interface Reader Drive Recorder Drives QD-123 Power Switch Power LED The QD-MultiDrive system consists of a CD reader, 3, 5, or 7 CD recorders (based on model) and Controller module. The master discs always go into the TOP CD Reader drive. The blank CD media will always go into the CD Recorder drives below the Reader. The power switch and power LED are also located on the front of the QD-MultiDrive
Inhaltszusammenfassung zur Seite Nr. 7
Main Menu ENT Load Next Source Disc Copying – 52x 17% 1.0 Copy 1. 0 Copy ENT Analyzing… . 150.4 MB 01:15 OK: 07 Blank Disc ESC ▼ Load Next ENT ENT Source Disc Testing – 52x 17% 2.0 Test Blank Disc 2.0 Test Analyzing… . 150.4 MB 01:15 OK: 07 ESC ▼ Load Next ENT ENT Source Disc Copying – 52x 17% 3.0 Copy Blank Disc 3.0 Test & Copy Analyzing… . 150.4 MB 01:15 OK: 07 ESC ▼ ENT Copied disc is now 4.0 Verify 4. 0 V erify Preparing… ... being read . OK: 07 ESC ▼ ENT Copied disc is now Compa
Inhaltszusammenfassung zur Seite Nr. 8
Functions There are 9 different functions for the QD-MultiDrive duplicator: Copy, Test, Test & Copy, Verify, Compare, Prescan, Disc Info, Edit Track and Setup. For the Setup options, please refer to page 12. These instructions refer to using 7 recorder drives (available only in the QD-127), but the QD- MultiDrive will operate using any number of the available recorder drives. Copy Please refer to pages 15-17 for CD+G duplication The Copy function is used to copy our master disc to the
Inhaltszusammenfassung zur Seite Nr. 9
Copying – 52x 18% When this operation completes, the unit will start the Copy 150.4MB 01:15 process: 3.0 Copy When the job is completed, the recorded discs will be ejected from the OK: 07 recorder drives. The display will read: Verify The Verify function will check to see if the recorded disc can be read. This is different from the Compare function. The Verify function will not compare itself with the master disc. It is only checking to see if the disc tha
Inhaltszusammenfassung zur Seite Nr. 10
Place the master disc into the TOP reader drive. Press the ENT button. The source is analyzed. The following screen appears: Source Disc (Analyzing) The following 4 screens display a variety of information about the master disc. The screens are reached by pressing the ▼▲ buttons. Total 01 Sessions Total: 04:15 Session 01 Track 01 Total 01 Tracks Total: 37.0MB Track 01 - 01 CDXA 37.0MB Edit Track The Edit Track function allows you to select multiple tracks from different
Inhaltszusammenfassung zur Seite Nr. 11
8. Press the ESC button to take you to this screen: Continue Edit If you wish to continue to add more audio tracks to the disc in Next disc? NO the recorder drive, press the ▼ button to change the NO to YES. Then press Enter. The TOP reader drive will open and ask you to put in the next master disc. Place the new disc into the drive and close the tray. Go to step 3 and repeat the process. Once you have completed copying the audio tracks to the Recorder drives, you will need to clo
Inhaltszusammenfassung zur Seite Nr. 12
Setup ENT ▲ ENT ▲ 9 -01. Setup Language Idioma Dil 9 .Setup Language English Spanish TURKCE ▼ ▼ ▼ CD Burn Speed ▲ ENT 9-02. Setup CD Burn Speed Available speeds: 48x, 40x, 32x, CD Burn Speed Maximum 24x, 20x, 16x, 10x, 4x ▼ ESC ▼ Read Speed ENT ▲ 9-03. Setup Read Speed DVD Read Speed Available speeds: 48x, Read Speed limited to 16x and 8x. Maximum ▼ 48x, 40x, 16x, 8x ▼ ▲ ENT 9-04. Setup Auto Start Drive Options are Off, Note: Option 2 is not used Auto Start Drive OFF 1 and 2 in the
Inhaltszusammenfassung zur Seite Nr. 13
Setup Menu The Setup menu includes many setting the user can select to customize the use of the QD- MultiDrive duplicator. Here is a description of the options in the setup menu. Language The QD-MultiDrive duplicator has two language options, English and Spanish. English is the default setting. CD Burn Speed The default record speed for the QD-MultiDrive is Maximum (52x). The other record speed options are: 48x, 40x, 32x, 24x, 16x, 12x, 10x, 8x and 4x. NOTE: 12x is currently the mi
Inhaltszusammenfassung zur Seite Nr. 14
Display Time The display time function is used to display the total record time, after the recording is completed. The default setting is Off. Button Sound The Button Sound function is used to turn on or off the beep sound a button makes when pressed. The default setting is On. Device Info The Device Info function displays a variety of information about the CD reader and writer, including model number and firmware revision. Please review the Setup Menu on page 12 for more details. S
Inhaltszusammenfassung zur Seite Nr. 15
Adv Setup ENT ENT 11- 01 Adv Setup Under Run Protect Options are ON or 11. Advanced Setup Under Run Protect ON Off ▼ ▼ ▲ ESC ENT 11- 02 Adv Setup Overburn Options are ON or Overburn Off Off ▼ ▼ ▲ ESC ENT 11- 03 Adv Setup Read Error Skip Options are ON or Read Error Skip OFF Off ▼ ▼ ▲ ESC ENT 11- 04 Adv Setup Burn-In Burn-In To Be Used by Burn-In Erase & Copy Test Service Personnel ▼ ONLY ▼ ESC ENT 11- 05 Adv Setup Update F/W A.321 Firmware is Update Firmware To B.123? YES updat
Inhaltszusammenfassung zur Seite Nr. 16
Advanced Setup Menu To get to the Advanced Setup Menu, press and hold the ESC button for three seconds. The Advanced Setup menu includes options for the more advanced user. Normally these functions are not used in the daily operation of the QD-MultiDrive duplicator. If you have any questions about using these functions, please contact the Microboards technical support department. UnderRun Protect The UnderRun Protect feature allows the recorder to use Burn Proof during recording. This
Inhaltszusammenfassung zur Seite Nr. 17
CD+G The CD+G feature, when set to ON in the Advanced Setup Menu, will allow you to copy a CD+G Karaoke master disc. The default setting is OFF. Important Note: The CD+G value must be set to OFF to use the Track Extraction feature. To enable CD+G duplication, perform the following steps: 1. Press and HOLD the ESC button for 3 seconds to enter the Advanced Setup Menu 2. Press the UP or DOWN arrows until the display reads 10-9: Adv Setup CD+G 3. Press ENT to adjust the CD+G setting 4.
Inhaltszusammenfassung zur Seite Nr. 18
Specifications – QD-MultiDrive Series Model Recorders Dimensions, inches (H x W x D) Weight, lbs QD-123 3 10.5 x 8 x 17 21 lbs QD-125 5 17 x 8 x 18 33 lbs QD-127 7 17 x 8 x 18 37 lbs • Product Interface ATAPI/ IDE • Firmware Upgrade Via CD-ROM • Read Speed 52X • AC Input: 115/230 VAC; 8/5 AMPS • Write Speed 52X MAX; 50-60Hz • Maximum Operating Temperature: 25 • System Display LED Degrees C. • Write Method Auto Detect (DAO, TAO ) • Relative Humidity: 30% - 80% non- • Operatio
Inhaltszusammenfassung zur Seite Nr. 19
Appendix 1 List of Functions 1 Copy 2 Test 3 Test & Copy 4 Verify 5 Compare 6 Prescan 7 Disc Info 8 Edit Track 8-1 CD to CD Edit 8-2 Play Audio Track 8-3 Close Session 9 Setup 9-1 Language (Default is English) 9-2 CD Burn Speed (Default is Maximum) 9-3 CD Read Speed (Default is Maximum) 9-4 Auto Start Drive (Default is Off) 9-5 Startup Menu (Default is Copy) 9-6 Auto Verify (Default is Off) 9-7 Auto Compare (Default is Off) 9-8 Auto Prescan (Default is Off) 9-9 Eject Disc (
Inhaltszusammenfassung zur Seite Nr. 20
Appendix 2 LCD Messages Normal Conditions: Initialize SDRAM......................................................................Initialize the memory of the system. Detect Drives....................................................Detect what drives are connected with the system. User Abort!....................................................................................Cancel the job during operation. Analyzing.............................................................................
