Inhaltszusammenfassung zur Seite Nr. 1
0
Inhaltszusammenfassung zur Seite Nr. 2
Symbol Description Warning! – This symbol alerts you to a potentially hazardous condition, such as the presence of dangerous voltage that could pose a risk of electrical shock. Refer to the accompanying Warning Label or Tag, and exercise extreme caution. Caution! – This symbol alerts you to important operating considerations or a potential operating condition that could damage equipment. Refer to the User’s Manual or Operator’s Manual for precautionary instructions. Copyright This product incorp
Inhaltszusammenfassung zur Seite Nr. 3
THIS PRODUCT APPLIES U.S. PATENT NOS.4,631,603, 4,577,216, 4,819,098, AND 4,907,093 LICENSED FOR LIMITED VIEWING USES ONLY.. Federal Communications Commission ( FCC ) Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received; including interference that may cause undesired operation. This Equipment has been tested and found to com
Inhaltszusammenfassung zur Seite Nr. 4
Content Copyright , FCC statement 3 Unpacking the DVD-Player 4 List of playable media 5 How to handle discs 5 General Part Front side 6 Back side 7 Connecting the DVD-Player 9 Remote Control 10 VFD Display 11 System LEDs 11 Configuration (SETUP) 12 DVD-Player Content of the DVD function part 17 Description of the functions 18 MP3-Player Content of the MP3 function part 26 Description of the functions 26 CD-Player Content of the CD function part 30 Description of the functions 30 VCD-Player Cont
Inhaltszusammenfassung zur Seite Nr. 5
Unpacking the DVD-Player Please check the contents of your DVD-Player carton User manual 1 pc Remote Control 1 pc Battery 2 pcs for remote control [size “AA” (R6P)] Power Cord 1 pc Video cable 1 pc Audio cable 1 pc (DVD-218/288/298 contain 3 audio cables) S-Video cable 1 pc 4
Inhaltszusammenfassung zur Seite Nr. 6
List of playable media All Yamakawa DVD-Players are compatible to DVD-, CD- and Video-CD Discs. All discs listed here can by played on this product. Usable play back time Discs Digital Audio DVD Video 1 Schicht 133min (4,7GB) 2 Schichten 242min (8,5GB) Video CD 74min maximal CD-Audio 74min maximal CD-R 80min maximal CD-RW 80min maximal Other discs than listed here can not be played on this product and may not be put into the drive in
Inhaltszusammenfassung zur Seite Nr. 7
General Part: Front side DVD-268 5 NTSC/PAL DIMM 1 6 7 8 4 9 10 2 3 DVD-278 1 5 6 3 9 10 2 4 8 DVD-208 1 3 2 4 5 1. On/Off On/off switch of DVD-Player 2. STOP Stops playback 3. PLAY Starts playback; select in menu system 4. Tray key open/close the drive 5. Tray part of the dr
Inhaltszusammenfassung zur Seite Nr. 8
Back side On the back side you will find all the outputs to connect your DVD-Player to your TV set and your Stereo- / Surround equipment . DVD-268/278 1 Optical Right Left Coax. Video S-Video Y Cb Cr 2 3 4 5 6 7 8 9 DVD-208 Right Left Coax. Video S-Video Y Cb Cr 2 3 4 5 6 7 9 1. Optical di
Inhaltszusammenfassung zur Seite Nr. 9
Connecting the DVD-Player Note: While your are connecting the DVD-Player to your TV-Set or Stereo-/Surround equipment, switch off all machines and pull their power cords. Video-Connection TV-set If your TV-set does not have component inputs you should at least connect your DVD-Player with the S-Video cable. The video connection via the standard-AV output should be your last choice. To connect your DVD-Players to your TV-set via a Video-recorder is not recommended because it may result in massive
Inhaltszusammenfassung zur Seite Nr. 10
Audio playback using your Stereo-/Surround equipment Parallel to the TV-set the sound can also be output through a connected Stereo- /Surround-equipment. Modern Surroundreceivers which have digital input connectors allow to connect the DVD-Player via its digital coaxial output. Only if the DVD-player is connected through a digital audio connection, audio signals can be transmitted as Dolby Digital 5.1 or DTS. If there is no possibility of an digital connection you can use the analog outputs to c
Inhaltszusammenfassung zur Seite Nr. 11
Remote Control 1. Standby 1. 2. DVD-Menu 3. tray open/close 2. 3. Resume/Memo 4. Setup DVD Player 4. 5. 6. 5. slow motion Display 6. Resume (Memo) 7. 8. 9. 7. Intro Play (CD/MP3) 8. Chapter- [time search] 10. 11. 12. 9. Display [Info / time] 13. 14. 15. 10. Language setting 11. Angle / Shuffle 16. 17. 15. 12. Mute 18. 19. 20. 13. Subtitle 21. 14. Zoom 15. Volume 16. FR 22.
Inhaltszusammenfassung zur Seite Nr. 12
VCD Display (only model DVD-268/278) 1 45 6 10 11 2 3 78 9 13 12 1. type of disc inserted 8. Number of chapter/track 2. Playback / Pause 9. Angle 3. Audio output 10. Dolby Digital 4. DVD title with parental control 11. Zoom 5. Playback (player reads disc) 12. PBC playback control (VCD) 6. Repeat 13. Time 7. Number of title System-LEDs (only model DVD-208) Underneath the power key there are two LED on the front bezel. These LED show the different operational modes: Left Righ
Inhaltszusammenfassung zur Seite Nr. 13
Configuration (SETUP) Once you have connected your DVD-Player you may now switch it on. If the video connection is correct you will see the Yamakawa startup picture. Before you insert a DVD-movie or any other disc into the player you should complete the setup settings which are described on the following pages. The basic settings of the DVD-Player are done in the SETUP. If you press the SETUP key you will see the main menu of the DVD-Player. Normally these settings only have to be made once bef
Inhaltszusammenfassung zur Seite Nr. 14
Audio output If you use the coaxial or optical digital output of your DVD-Player for the audio output, then choose „DOLBY“. If your DVD-Player is connected to your TV set or stereo equipment with an analog connection choose the setting „PCM“. Also during the setting „DOLBY“ analog signals will be sent out parallel to the digital signals. So therefore the speakers of your conventionally connected TV set will still be working. The factory setting is „DOLBY“. DRC Here you can set the Dynamic Range
Inhaltszusammenfassung zur Seite Nr. 15
4:3 TV screen If you have a TV set with widescreen format 16:9 you should select „WIDE“. If you have a TV with 4:3 format you should choose the setting „4:3“, since the black bars during movies will disappear. If you choose the 4:3-setting „LB“ the well known black bars on top and bottom of the screen will appear but the picture is wider to the left and right. Factory setting is „4:3“. TV System If you have an older TV set it may not have multisync technology. In this case you have to choo
Inhaltszusammenfassung zur Seite Nr. 16
OTHER If you choose “OTHER” in the main menu, you have 4 items to choose from: • PASSWORD • LEVEL • OSD LANGUAGE • Display DIMM PASSWORD By entering a password you can change the level of parental control under the item “LEVEL”. If you entered the right password you may also change the factory set password and replace it with your own. The factory set password is „8888“ LEVEL Some DVD movies have electronic parental control function which will work together with the settings in t
Inhaltszusammenfassung zur Seite Nr. 17
OSD LANGUAGE OSD-Language is the language of the menu that you are currently setting. The setting of this language has nothing to do with the playback of a DVD. If you like to keep the english menu, which is factory set, you do not need to change anything. DISPLAY DIMM On the models (DVD-268/278) with VFD-Display on the front side you can control the brightness of the display in 4 levels. 16
Inhaltszusammenfassung zur Seite Nr. 18
DVD-Player Content of the DVD function part Function Symbol Page Displaysystem 21 Chapter search 20 Drive 18 Volume control 24 /Resume Bookmark 19 Menusystem of the DVD 19 Pause 24 Cursor keys 25 FR 24 Skip backward 24 Setup DVD-Player 19 Language of movie 22 Standby Mode 18 Stop 25 Mute 22 Subtitle 23 FF 24 Skip forward 24 PLAY 25 Repeat (loop) 25 Repeat (Chapter or Film) 25 Angle setting 22 Time display 21 Slow motion 19
Inhaltszusammenfassung zur Seite Nr. 19
Description of the functions: Explaining the functions during DVD-Player mode according to the keys on your remote control. Hints for playing discs Some DVD titles require different operation or certain inputs on your remote control are not possible due to limitations that have been made by the maker of the individual disc. In such cases the operational steps may be different or certain functions may not be available. Some discs f.e. offer interactive menu screens during playback. Some keys on y
Inhaltszusammenfassung zur Seite Nr. 20
With the menu key you can open the main menu of the DVD disc during playback, if such a menu is available on the disc. Generally all DVDs have such a menu structure where you can navigate between different features. With the PLAY key you enter the selected item. Depending on the disc`s menu system pressing the menu key for a second time will continue the playback at the point where you first pressed the menu key („Resume“ function). The Setup-key will bring you to the main menu of the DVD-Player
