Inhaltszusammenfassung zur Seite Nr. 1
OWNER’S
MANUAL
DVD PLAYER with VIDEO CASSETTE RECORDER
CDVC800D
ReWritable Recordable
POWER
OPEN/CLOSE
CHANNEL STOP/EJECT
PLAY
DVD VCR
VIDEO L AUDIO R
OUTPUT
DVD DVD VCR TIMER REC REC
STOP PLAY REW F.FWD
If you need additional assistance for set-up or operating
after reading owner’s manual, please call
TOLL FREE : 1-800-287-4871.
Please read before using this equipment.
Inhaltszusammenfassung zur Seite Nr. 2
: WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, CAUTION within an equilateral triangle, is intended to RISK OF ELECTRIC SHOCK alert the user to the presence of uninsulated DO NOT OPEN “dangerous voltage” within the product’s : enclosure that may be of sufficient magnitude CAUTION to constitute a risk of electric shock to persons. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK
Inhaltszusammenfassung zur Seite Nr. 3
IMPORTANT SAFEGUARDS 1. Read Instructions - All the safety and operating instruc- ing of the mast and supporting structure, grounding of the tions should be read before the appliance is operated. lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection 2. Retain Instructions- The safety and operating instructions to grounding electrodes, and requirements for the grounding should be retained for future reference. electrode. (Fig. A) 3
Inhaltszusammenfassung zur Seite Nr. 4
A NOTE ABOUT RECYCLING This product’s packaging materials are recyclable and can be reused. Please dispose of all materials in accordance with your local recycling regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes. The serial number of this product may be found on the back of the DVD/VCR COMBINATION UNIT. This ser- ial number is unique to your machine. You should record the number and other vital
Inhaltszusammenfassung zur Seite Nr. 5
TABLE OF CONTENTS LASER SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . 3 BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 ABOUT COPYRIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 GENERAL FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 SUPPLI
Inhaltszusammenfassung zur Seite Nr. 6
FEATURES ¡Virtual Surround Sound DVD Mode ¡Component Video Out Jacks ¡Dolby Digital sound Jacks located on the back of the DVD/VCR COMBINA- This DVD/VCR COMBINATION UNIT can output a TION UNIT which are used to send high-quality video to Dolby Digital audio signal. a TV via Component Video In Jacks. ¡Still/fast/slow/step playback ¡Bit rate indication ¡Random playback for audio CD and MP3 ¡DRC (Dynamic range control) ¡Program playback for audio CD and MP3 You can control the range of sound volume
Inhaltszusammenfassung zur Seite Nr. 7
ABOUT THE DISCS PLAYABLE DISCS DISC TYPES The following discs can be played back on this [DVD] DVD/VCR COMBINATION UNIT. Data on a DVD is divided into sections called "titles", and ¡ ¡ then into subsections called "chapters", each of which is DVD video DVD-R/RW* given a title or chapter number. Playback conditions are ¡ ¡ DVD+R/RW* Audio CD preset on some DVD video discs, and these playback con- ¡CD-R/RW* ¡MP3* ditions take priority over user operations on this player. If * Depending on the type
Inhaltszusammenfassung zur Seite Nr. 8
OPERATING CONTROLS AND FUNCTIONS FRONT PANEL 1 2 3 4 5 68 7 POWER OPEN/CLOSE STOP/EJECT CHANNEL PLAY DVD VCR VIDEO L AUDIO R OUTPUT DVD DVD VCR TIMER REC REC STOP PLAY REW F.FWD 21 19 18 16 14 12 10 22 20 17 15 13 11 9 REMOTE CONTROL 7. POWER Light This light appears when the power is on. 8. STOP/EJECT Button (VCR) 52 23 POWER SPEED AUDIO EJECT Button 24 Press to remove the tape from the VCR. STOP Button 12 3 51 SKIP/CH. Press to stop the tape motion. 45 6 9. PLAY Button(VCR) [page 18] 25 VCR/TV
Inhaltszusammenfassung zur Seite Nr. 9
18. OUTPUT Button [page 12] 32. TITLE Button [page 23] Press to select DVD mode or VCR mode. 33. SETUP Button [pages 28-31] You can switch the output mode either by pressing Press to enter DVD player setup mode. OUTPUT on the front panel, or by pressing DVD or 34. ZOOM Button [page 24] VCR on the remote control. However, if you press Enlarges part of a DVD-reproduced image. OUTPUT on the front panel first, you need to re- 35. MODE Button [pages 26, 27, and 30] select the corresponding mode by
Inhaltszusammenfassung zur Seite Nr. 10
49. SLOW Button [page 18] 45. g Button During tape playback, press to view the video tape in DVD mode [page 23] slow motion. Press again to resume normal playback. Press to fast forward the Disc. Press PAUSE, then This button does not affect DVD playback. press this button to begin slow motion playback. 50. VCR/TV Button [page 19] Press this button repeatedly to change the forward Use to select VCR or TV position. speed of slow motion. VCR Position VCR mode [page 18] To view playback, to mon
Inhaltszusammenfassung zur Seite Nr. 11
59. DVD ANALOG AUDIO OUT Jacks 62. DVD/VCR VIDEO OUT Jack Connect the supplied audio cables here and to the Audio Connect the yellow video cable (supplied) here and to In jacks of a television or other audio equipment (DVD the TV’s Video In jack. only). 63. ANT-OUT (Antenna Out) Jack 60. S-VIDEO OUT Jack Use the supplied RF coaxial cable to connect this jack Connect an optional S-Video cable here and to the S- to the ANTENNA IN Jack on your TV. Video In jack of a television. (DVD only) Caution:
Inhaltszusammenfassung zur Seite Nr. 12
VCR/DVD SWITCHING Because this product is a combination of a VCR and DVD player, you must first select which component you wish to operate with the OUTPUT BUTTON. VCR MODE DVD MODE Press VCR on the remote control. Press DVD on the remote control. (Verify that the VCR OUTPUT Light is lit.) (Verify that the DVD OUTPUT Light is lit.) Notes ¡Pressing only OUTPUT on the front panel does not switch the mode of the remote control. You always need to select the correct mode on the remote control too. PO
Inhaltszusammenfassung zur Seite Nr. 13
IN OUT HOOKUPS CAUTION: ¡Be sure to turn off the DVD/VCR COMBINATION UNIT and equipment to be connected. ¡Read through the operation manual for the equipment to be connected. ¡Be sure that the colors of the jacks and plugs match up when using VIDEO/AUDIO cables. ¡Be sure to keep the DVD/VCR COMBINATION UNIT connection cables separate from the TV antenna cable when you install the DVD/VCR COMBINATION UNIT, because it may cause electrical interference when you are watching television programs. CON
Inhaltszusammenfassung zur Seite Nr. 14
CONNECTING TO A TV THAT HAS AN S-VIDEO INPUT JACK OR COMPONENT VIDEO IN JACKS FOR TVs WITH S-VIDEO INPUT JACK Use an S-Video cable (commercially available) in place of the yellow video cable to enjoy higher quality pic- tures. The S-Video connection only supplies video (picture) in the DVD mode of the DVD/VCR COMBINATION UNIT. Therefore, in order to use the VCR features or view TV channels on the DVD/VCR COMBINATION UNIT, you still need to either connect the RF cable between the ANT-OUT jack of
Inhaltszusammenfassung zur Seite Nr. 15
CONNECTING TO A RECEIVER WITH DOLBY DIGITAL DECODER If using this DVD/VCR COMBINATION UNIT to play a DVD disc in 5.1 channel Dolby Digital surround, the DVD/VCR COMBINATION UNIT outputs a Dolby Digital data stream from its COAXIAL DIGITAL AUDIO OUT jack. By hooking the DVD/VCR COMBINATION UNIT up to a Dolby Digital receiver, you can enjoy a more convincing, realistic ambience with powerful and high-quality surround sound as heard in movie theaters. Use an audio coaxial digital cable (commercial
Inhaltszusammenfassung zur Seite Nr. 16
SETUP AUTOMATIC CHANNEL SET UP 6 After scanning, the tuner stops on the low- VCR est memorized channel. The TV screen You can automatically program the tuner to scan only returns to TV mode. the channels you receive in your area. ¡If “AUTO SET UP” appears on the TV screen again, ¡Channel memory programming is NOT needed check the cable connections. Press B once again and when you connect the VCR to a cable box or a satel- the VCR will begin preset again. lite box as in "CONNECTING TO A TV WITH
Inhaltszusammenfassung zur Seite Nr. 17
TO ADD/DELETE CHANNELS CLOCK SET UP When scanning, some channels may be skipped due to a weak signal. In such cases, you can add the channels VCR to the VCR memory manually. 1 Select main menu by pressing MENU. 1 Press MENU until the main menu appears. ¡If the clock is not set, the CLOCK SET menu (If you have already set the - MENU - appears first. In this case, follow step [3]. TIMER PROGRAMMING AUTO REPEAT [OFF] clock, you only have to CHANNEL SET UP CLOCK SET LANGUAGE SELECT press it on
Inhaltszusammenfassung zur Seite Nr. 18
PLAYBACK FUNCTION NORMAL PLAYBACK 2 Select "AUTO REPEAT" by pressing K or L. VCR 3 Begin auto repeat playback by pressing B so that ON appears next to "AUTO 1 Insert a prerecorded tape. The VCR will turn REPEAT". on. ¡If the on-screen menu still remains, CLEAR/C.RESET ¡If the safety tab has been removed, the to exit the menu. VCR will start playback automatically. ¡To cancel the Auto repeat mode, press B at step [3] so that OFF appears next to "AUTO REPEAT". 2 Turn on the TV and set the
Inhaltszusammenfassung zur Seite Nr. 19
RECORDING FUNCTION VCR You can not copy a DVD to a videotape OTR (One Touch Recording) VCR It may be UNLAWFUL to record copyrighted materi- al without the consent of the copyright owner. This feature allows you to set the recording length sim- Accidental Erasure Prevention ply by pressing REC/OTR on the VCR. To prevent accidental recording on a recorded cassette, remove its record 1 Press REC/OTR to begin OTR. The TIMER safety tab. To record on it later, cover the Record safety tab REC light c
Inhaltszusammenfassung zur Seite Nr. 20
¡If a tape ends during TIMER RECORDING, the 2) Set the frequency of the recording VCR will stop, eject the tape, and switch to the DVD For once: Press K or L to point to mode automatically as the TIMER REC light blinks. "ONCE". PROGRAM NUMBER 4 (If the DVD power is off, the VCR will become ONCE For daily (Monday~Friday): Press K DAILY STANDBY status). or L to point to "DAILY". WEEKLY ¡If a tape is not in the VCR or does not have a safety tab, For
