Inhaltszusammenfassung zur Seite Nr. 1
MICROMASTER 420
0.12 kW - 11 kW
Operating Instructions Issue 07/04
User Documentation
6SE6400-5AA00-0BP0
Inhaltszusammenfassung zur Seite Nr. 2
MICROMASTER 420 Documentation Getting Started Guide Is for quick commissioning with SDP and BOP. Operating Instructions Gives information about features of the MICROMASTER 420, Installation, Commissioning, Control modes, System Parameter structure, Troubleshooting, Specifications and available options of the MICROMASTER 420. Parameter List The Parameter List contains the description of all Parameters structured in functional order and a detailed description. The Parameter list als
Inhaltszusammenfassung zur Seite Nr. 3
Overview 1 Installation 2 Commissioning 3 MICROMASTER 420 0.12 kW - 11 kW Troubleshooting 4 MICROMASTER 420 5 Operating Instructions specifications User Documentation Options 6 Electro-magnetic 7 compatibility (EMC) Appendices A B C D E F Valid for Release Issue 07/04 Index Inverter Type Control Version MICROMASTER 420 V1.1 0.12 kW - 11 kW Issue 07/04
Inhaltszusammenfassung zur Seite Nr. 4
Further information is available on the Internet under: http://www.siemens.de/micromaster Approved Siemens Quality for Software and Training Other functions not described in this document may be is to DIN ISO 9001, Reg. No. 2160-01 available. However, this fact shall not constitute an obligation to supply such functions with a new control, or The reproduction, transmission or use of this document, when servicing. or its contents is not permitted unless authorized in We ha
Inhaltszusammenfassung zur Seite Nr. 5
Issue 07/04 Foreword Foreword User Documentation WARNING Before installing and commissioning, you must read the safety instructions and warnings carefully and all the warning labels attached to the equipment. Make sure that the warning labels are kept in a legible condition and replace missing or damaged labels. Information is also available from: Regional Contacts Please get in touch with your contact for Technical Support in your Region for questions about services, prices and
Inhaltszusammenfassung zur Seite Nr. 6
Definitions Issue 07/04 Definitions and Warnings DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION used with the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. CAUTION used without safety alert symbol indic
Inhaltszusammenfassung zur Seite Nr. 7
Issue 07/04 Safety Instructions Safety Instructions The following Warnings, Cautions and Notes are provided for your safety and as a means of preventing damage to the product or components in the machines connected. This section lists Warnings, Cautions and Notes, which apply generally when handling MICROMASTER 420 Inverters, classified as General, Transport & Storage, Commissioning, Operation, Repair and Dismantling & Disposal. Specific Warnings, Cautions and Notes that apply to particul
Inhaltszusammenfassung zur Seite Nr. 8
Safety Instructions Issue 07/04 NOTICE ♦ Keep these operating instructions within easy reach of the equipment and make them available to all users ♦ Whenever measuring or testing has to be performed on live equipment, the regulations of Safety Code VBG 4.0 must be observed, in particular § 8 "Permissible Deviations when Working on Live Parts”. Suitable electronic tools should be used. ♦ Before installing and commissioning, please read these safety instructions and warnings carefully and
Inhaltszusammenfassung zur Seite Nr. 9
Issue 07/04 Safety Instructions Operation WARNING ♦ Motor parameters must be accurately configured for the motor overload protection to operate correctly. ♦ MICROMASTERS operate at high voltages. ♦ When operating electrical devices, it is impossible to avoid applying hazardous voltages to certain parts of the equipment. ♦ Emergency Stop facilities according to EN 60204 IEC 204 (VDE 0113) must remain operative in all operating modes of the control equipment. Any disengagement of the E
Inhaltszusammenfassung zur Seite Nr. 10
Safety Instructions Issue 07/04 MICROMASTER 420 Operating Instructions 10 6SE6400-5AA00-0BP0
Inhaltszusammenfassung zur Seite Nr. 11
Issue 07/04 Table of Contents Table of Contents 1 Overview ................................................................................................................ 17 1.1 The MICROMASTER 420....................................................................................... 18 1.2 Features.................................................................................................................. 19 2 Installation............................................................
Inhaltszusammenfassung zur Seite Nr. 12
Table of Contents Issue 07/04 4 Troubleshooting.................................................................................................. 151 4.1 Troubleshooting with the SDP .............................................................................. 152 4.2 Troubleshooting with the BOP.............................................................................. 153 4.3 Fault messages and alarm messages.................................................................. 154 5 MICR
Inhaltszusammenfassung zur Seite Nr. 13
Issue 07/04 Table of Contents List of Illustrations Fig. 2-1 Forming ................................................................................................................................ 23 Fig. 2-2 Ambient operating temperature ............................................................................................ 23 Fig. 2-3 Installation altitude................................................................................................................ 24 Fig. 2-4 Dril
Inhaltszusammenfassung zur Seite Nr. 14
Table of Contents Issue 07/04 Fig. 3-31 USS bus configuration.......................................................................................................... 98 Fig. 3-32 Example for directly selecting FF1 via DIN1 and FF2 via DIN2.......................................... 100 Fig. 3-33 Example for selecting FF1 via DIN1 and FF2 via DIN2 using the binary-coded method .... 101 Fig. 3-34 Motorized potentiometer..........................................................................
Inhaltszusammenfassung zur Seite Nr. 15
Issue 07/04 Table of Contents List of Tables Table 2-1 Dimensions and Torques of MICROMASTER 420............................................................... 25 Table 3-1 Parameter attributes............................................................................................................. 40 Table 3-2 Parameter P0700 .................................................................................................................44 Table 3-3 Parameter P1000 .....................
Inhaltszusammenfassung zur Seite Nr. 16
Table of Contents Issue 07/04 MICROMASTER 420 Operating Instructions 16 6SE6400-5AA00-0BP0
Inhaltszusammenfassung zur Seite Nr. 17
Issue 07/04 1 Overview 1 Overview This Chapter contains: A summary of the major features of the MICROMASTER 420 range. 1.1 The MICROMASTER 420....................................................................................... 18 1.2 Features.................................................................................................................. 19 MICROMASTER 420 Operating Instructions 17 6SE6400-5AA00-0BP0
Inhaltszusammenfassung zur Seite Nr. 18
1 Overview Issue 07/04 1.1 The MICROMASTER 420 The MICROMASTER 420s are a range of frequency inverters for controlling the speed of three phase AC motors. The various models available range from the 120 W single-phase input to the 11 kW three-phase input. The inverters are microprocessor-controlled and use state-of-the-art Insulated Gate BipoIar Transistor (IGBT) technology. This makes them reliable and versatile. A special pulse-width modulation method with selectable Pulse frequency
Inhaltszusammenfassung zur Seite Nr. 19
Issue 07/04 1 Overview 1.2 Features Main Characteristics Easy installation Easy commissioning Rugged EMC design Can be operated on IT line supplies Fast repeatable response time to control signals Comprehensive range of parameters enabling configuration for a wide range of applications Simple cable connection 1 Output relay 1 Analog output (0 – 20 mA) 3 Isolated and switchable NPN/PNP digital inputs 1 Analog input, ADC: 0 – 10 V th The analog input can be used as the
Inhaltszusammenfassung zur Seite Nr. 20
1 Overview Issue 07/04 Protection characteristics Overvoltage/undervoltage protection Overtemperature protection for the inverter Ground fault protection Short-circuit protection 2 i t thermal motor protection PTC for motor protection Options Refer to Chapter 6 MICROMASTER 420 Operating Instructions 20 6SE6400-5AA00-0BP0
