Inhaltszusammenfassung zur Seite Nr. 1
SD-871
Inhaltszusammenfassung zur Seite Nr. 2
Introduction READ THIS BEFORE OPERATING YOUR UNIT This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. : TO REDUCE THE RISK OF ELECTRIC CAUTION This symbol is intended to alert the user to the SHOCK, DO NOT REMOVE COVER (OR presence of important operating and BACK). NO USER-SERVICEABLE maintenance (servicing) instructions in the PARTS INSI
Inhaltszusammenfassung zur Seite Nr. 3
SAFETY INSTRUCTIONS 1. Read Instructions - All the safety and operating instructions should Figure 1 be read before the product is operated. Example of antenna grounding as per National Electrical Code, ANSI/NFPA 70 2. Retain instructions - The safety and operating instructions should ANTENNA LEAD IN WIRE be retained for future reference. 3. Heed Warnings - All warnings on the product and in the operating GROUND CLAMP instructions should be adhered to. 4. Follow Instructions - All operating and
Inhaltszusammenfassung zur Seite Nr. 4
FOR YOUR SAFETY Units shipped to the U.S.A and Canada are designed for operation on 120 V AC only. Safety precaution with use of a polarized AC plug. However, some products may be supplied with a nonpolarized plug. U.S.A : To prevent electric shock, match wide blade of plug to wide slot, fully CAUTION and 120 V insert. CANADA : Pour éviter chocs électriques, introduire la lame la plus large de la fiche ATTENTION dans la borne correspondante de la prise et pousser jusqu’ au fond. The available po
Inhaltszusammenfassung zur Seite Nr. 5
CONTENTS • Introduction READ THIS BEFORE OPERATING YOUR UNIT | 2 • System Connections CONNECTING TO A/V AMPLIFIER OR RECEIVER | 6 CONNECTING TO TV WITH HDMI INPUT CONNECTOR | 9 CONNECTING TO TV WITH AUDIO AND VIDEO INS | 11 CONNECTING TO TV WITH SCART CONNECTOR(Regional Option) | 11 • Front Panel & Remote Controls | 12 REMOTE CONTROL OPERATION RANGE | 13 LOADING BATTERIES | 13 • Preliminary Knowledge About Discs PLAYABLE DISC TYPES | 14 REGION CODE
Inhaltszusammenfassung zur Seite Nr. 6
System Connections • Do not connect the AC input cord into the AC outlet when plugging and unplugging connection cords. • Since different components often have different terminal names, carefully read the operating instructions of the component connected. • Be sure to observe the color coding when connecting audio and video cords. • The supplied cords are a (stereo) audio cord, a composite video cord, a system control cord and a power cord. Other cords are commercially-available cords. CONNECTIN
Inhaltszusammenfassung zur Seite Nr. 7
1. Connecting 5.1CH AUDIO OUTPUTs 3. Connecting DIGITAL OUTPUTs • To fully enjoy the multi-channel audio of DVD Audio and • To enhance the sound quality, connect either the OPTICAL SACD as well as Dolby Digital and DTS soundtracks of or the COAXIAL DIGITAL OUTPUT jack to the DVD Video, etc., connect these jacks to the corresponding corresponding DIGITAL INPUT jack of your amplifier/ channel input jacks of your A/V amplifier/receiver. receiver with built-in Dolby Digital or DTS decoder. (You don’
Inhaltszusammenfassung zur Seite Nr. 8
4. Connecting COMPOSITE VIDEO OUTPUTs 1, 2 7. Connecting DIGI-LINK jack • Connect this jack to the (composite)VIDEO input jack of • Connect this jack to the DIGI LINK jack of the external your amplifier/receiver or TV. Sherwood component that uses the DIGI LINK II or III • The same signal is output from COMPOSITE VIDEO remote control system. OUTPUT 1 and 2 jacks, enabling connection to two devices(e, g., an A/V amplifier and additional TV) Sherwood component simultaneously. with DIGI LINK II or
Inhaltszusammenfassung zur Seite Nr. 9
CONNECTING TO TV WITH HDMI INPUT CONNECTOR • If you have a HDMI INPUT connector equipped TV or projector, etc., connect it to the HDMI OUTPUT connector of this unit using a commercially available HDMI cord. The HDMI connection can carry uncompressed digital video and multi-channel digital audio signals. • Among the HDMI INPUT connector equipped TV or projector, etc., some do not support audio output(for examples, projectors). In such a case, make an audio connection between this unit and A/V rec
Inhaltszusammenfassung zur Seite Nr. 10
Audio output from the unit’s HDMI OUTPUT and 5.1CH / 2CH AUDIO OUTPUTs • Depending on the AUDIO OUT setting, the following table shows the audio signals to be output from the HDMI OUTPUT connector and 5.1CH / 2CH AUDIO OUTPUTs.(For details, refer to “When selecting the AUDIO OUT” on page 42.) AUDIO OUT setting Disc type Audio recording format Output 6 HDMI AUTO MULTI CH STEREO Lt/Rt * *1 HDMI Dolby Digital Multi-channel PCM 2 channel PCM - Dolby Digital 3 3 5.1CH / 2CH Multi-channe
Inhaltszusammenfassung zur Seite Nr. 11
CONNECTING TO TV WITH AUDIO AND VIDEO INS • You can enjoy DVD Videos by simply connecting this unit to a TV. To hear improved audio sound quality, connect the 2CH AUDIO OUTPUTs to the AUDIO INs of DVD(, AUX, CD, etc.) of your amplifier/receiver. • To connect these jacks correctly, refer to “Connecting 2CH AUDIO OUTPUTs” on page 7, “Connecting COMPOSITE VIDEO OUTPUTs 1, 2” and so forth on page 8. Notes: • If your TV has a monaural audio input instead of stereo, you need to use an optional audio c
Inhaltszusammenfassung zur Seite Nr. 12
Front Panel & Remote Controls Front Panel Controls 1. POWER switch 2. STANDBY indicator 3. FORWARD/BACKWARD SKIP ( / ) buttons 4. STOP( ) button 5. PAUSE/STEP( ) button 6. PLAY( ) button 7. OPEN/CLOSE( ) button 8. DISC TRAY 9. HDMI ON indicator 10. HD(High Definition) indicator 11. PURE AUDIO indicator 12. REMOTE SENSOR 13. FLUORESCENT DISPLAY • For details, see next page. Remote Controls 1. POWER ON button 2. STANDBY button 3. OPEN/CLOSE( ) button 4. DIMMER button 5. DISPLAY button
Inhaltszusammenfassung zur Seite Nr. 13
Fluorescent Display PLAY Indicator SOUND RECORDING SYSTEM PURE AUDIO indicators indicators DISC TYPE VIDEO FILE TYPE SOUND RECORDING SYSTEM indicators PROGRESSIVE indicator indicators indicators PAUSE indicator REMAIN indicator Group/title number, SOUND RECORDING Resolution indicators CHANNEL SYSTEM indicator indicators ANGLE indicator track/chapter number, MDHI indicator
Inhaltszusammenfassung zur Seite Nr. 14
Preliminary Knowledge About Discs PLAYABLE DISC TYPES REGION CODE This unit supports the following discs. • DVD players and DVD Videos have their own Region Code numbers which are assigned to each country or area as Disc Logo Format or file type shown below. DVD players are set to your Region Code number at the factory. As a result, if the region code number of this DVD player is different from that of the DVD DVD Video DVD Video Video, playback of the DVD Video w
Inhaltszusammenfassung zur Seite Nr. 15
AUDIO AND VIDEO FILES CARE AND HANDLING OF DISCS • Folder and file names are displayed up to 11 characters. • In handling a disc, hold it carefully • Characters except “A~Z”, “0~9”, “ - ” may be not displayed. with edges. • The playback order of folders and files shown in the menu may differ from the order shown in a PC. • This unit supports multi-session discs. Some multi-session discs may take a long time to load and some may not be loaded at all. • Do not stick paper or write anything on the
Inhaltszusammenfassung zur Seite Nr. 16
Operations Before starting playback • Make the initial settings to suit your usage conditions the very first time this unit is turned on.(For details, refer to “Initial Settings” on page 32) • For explanation purposes, this instructions explains the OSD(On-Screen Display) language displayed on TV in English. • Usable discs for each operation/ function are referred to by the icons; BASIC PLAYBACK Preparations • Turn on the TV and select the video input source connected to the unit. • When you w
Inhaltszusammenfassung zur Seite Nr. 17
• When you load a MP3, WMA, JPEG, DivX disc or a DVD that contains a menu, the menu display may appear on the TV screen. In this case, see “To start playback from the menu of DVD” below or “To start playback from the menu of MP3, WMA, JPEG or DivX disc” on the next page. • Example of DVD Video • Example of MP3 disc TITLE MENU SMART NAVI Dogs Cats ROOT ROOT 0 POPS 1 Cows Horses BLUES 2 Folder and file menu Root menu HAPPY 3 SO LONG 4 CLASSIC 5 LI
Inhaltszusammenfassung zur Seite Nr. 18
To start playback from the menu of MP3, WMA, JPEG or DivX disc In the stop mode, press the CURSOR / buttons to select the folder and file menu. 1 RC Press the CURSOR / buttons to select the preferred folder or file then press the ENTER button. 2 RC RC • When selecting the preferred file, playback starts from the selected file. • When selecting the preferred folder, the file menu screen of the selected folder is displayed. In this case, repeat this step to select the preferred file in its fi
Inhaltszusammenfassung zur Seite Nr. 19
To stop playback • When playback of a DVD is stopped, the unit memorizes the point where the STOP( ) button was Main unit RC pressed(RESUME function: DVD only). (“RESUME” is displayed on the unit’s display when this function is activated.) or • Press the PLAY( ) button again, and playback will resume from this point. When the STOP( ) button is pressed again, the RESUME function will be canceled and it enters stop mode.(“STOP” is displayed.) • During playback of a DVD, when the unit is turned
Inhaltszusammenfassung zur Seite Nr. 20
To skip ahead or back during playback • To skip ahead • To skip back • Each time the button is pressed, a chapter/track/file is skipped. • In case of DVD, SACD and CD, when the BACKWARD SKIP button is pressed once midway through a Main unit RC Main unit RC chapter/track, playback returns to the beginning of that chapter/track. When it is pressed again, a chapter/ track is skipped. or or • You can select a chapter/track/file directly with pressing the NUMERIC buttons on t
