Inhaltszusammenfassung zur Seite Nr. 1
DVD Player
DVD-HD850
Inhaltszusammenfassung zur Seite Nr. 2
Precautions 1. Setting up - Refer to the identification label located on the rear of your player for its proper operating voltage. STANDBY/ON EZ VIEW PLAY LOADING - Install your player in a cabinet with adequate ventilation holes. (7~10cm) Do not block ventilation holes on any of the components for air circulation. - Do not push the disc tray in by hand. - Do not stack components. STANDBY/ON EZ VIEW PLAY LOADING - Be sure to turn all components off before moving the player. - Before connecting o
Inhaltszusammenfassung zur Seite Nr. 3
5. Environmental info - The battery used in this product contains chemicals that are harmful to the environment. - So, dispose of batteries in the proper manner, according to federal, state, and local regulations. The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties. This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for commercial use. The license does
Inhaltszusammenfassung zur Seite Nr. 4
Before you start Accessories Remote Batteries for User’s Manual Video/Audio HDMI Cable Control Remote Control Cable (AAA Size) Install Batteries in the Remote control 1 Open the battery cover on the back of the remote control. 2 Insert two AAA batteries. Make sure that the polarities (+ and -) are aligned correctly. 3 Replace the battery cover. If the remote control doesn’t operate properly: - Check the polarity + - of the batteries (Dry-Cell) - Check if the batteries are drained. - Check i
Inhaltszusammenfassung zur Seite Nr. 5
TABLE OF CONTENTS Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Chapter 1: Setup General Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Disc Type and Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 D
Inhaltszusammenfassung zur Seite Nr. 6
Chapter 1 SETUP Note General Features - Discs which cannot be played with this player. Excellent Sound • DVD-ROM • DVD-RAM Dolby Digital, a technology developed by Dolby • CD-ROM • CDV Laboratories, provides crystal clear sound reproduction. • CDI • CVD • Super Audio CD(except CD layer) Screen Both regular and widescreen(16:9) pictures can be • CDGs play audio only, not graphics. viewed. - Ability to play back may depend on recording conditions. Slow Motion • DVD-R, +R An important scene can
Inhaltszusammenfassung zur Seite Nr. 7
Setup SETUP Disc Type and Characteristics This DVD player is capable of playing the following types of discs with the corresponding logos: Disc Types (Logos) Recording Types Disc Size Max. Playing Time Characteristics - DVD contains excellent sound and Single-sided 240 min. DVD 12 Cm video due to Dolby Digital and Double-sided 480 min. Audio MPEG-2 system. + - Various screen and audio functions Video Single-sided 80 min. 8 Cm can be easily selected through the Double-sided 160 min. on-screen m
Inhaltszusammenfassung zur Seite Nr. 8
SETUP Description Front Panel Controls 9 10 EZ VIEW 1 23 4 5 6 7 8 1. STANDBY/ON ( ) 6. STOP ( ) When the unit is first plugged in, the indicator lights. Stops disc play. When STANDBY/ON is pressed on, the indicator goes out 7. REMOTE CONTROL RECEIVER and the player is turned on. 8. SKIP ( ) / SEARCH 2. DISC TRAY Use to forward skip a scene or music. Place the disc here. 9. SKIP ( ) / SEARCH 3. OPEN/CLOSE ( ) Use to reverse skip a scene or music. Press to open and close the disc tray. 10. PLAY
Inhaltszusammenfassung zur Seite Nr. 9
Setup SETUP Rear Panel 1 2 13 4 5 6 7 1. DIGITAL AUDIO OUT JACKS 5. S-VIDEO OUT JACK - Use either an optical or coaxial digital cable to connect - Use the S-Video cable to connect this jack to the to a compatible Dolby Digital receiver. S-Video jack on your television for higher picture - Use either an optical or coaxial digital cable to connect quality. to an A/V Amplifier that contains a Dolby Digital, - The Video Output in Setup Menu must be set to MPEG2 or DTS decoder. COMPOSITE/S-VIDEO. 2
Inhaltszusammenfassung zur Seite Nr. 10
SETUP Tour of the Remote Control 6. TV/VIDEO Button Press to display all of the available video sources ( i.e., TV, Cable, Video) 17 1 7. SEARCH Buttons ( / ) Allow you to search forward/backward through a disc. 8. STOP Button ( ) 2 9. SKIP Buttons ( / ) Use to skip the title, chapter or track. 10. MENU Button Brings up the DVD player’s menu. 3 18 11. RETURN Button Returns to a previous menu. 4 19 12. AUDIO Button 20 Use this button to access various audio functions on a disc. 5 21 13. ZOOM But
Inhaltszusammenfassung zur Seite Nr. 11
Connections Chapter 2 CONNECTIONS Choosing a Connection The following shows examples of connections commonly used to connect the DVD player with a TV and other components. Before Connecting the DVD Player - Always turn off the DVD player, TV, and other components before you connect or disconnect any cables. - Refer to the user’s manual of the additional components (such as a TV) you are connecting for more information on those particular components. Connecting to a TV (SCART) - Using the SCART,
Inhaltszusammenfassung zur Seite Nr. 12
CONNECTIONS Connection to a TV (S-Video) - Connecting to your TV using an S-Video cable. - You will enjoy high quality images. S-Video separates the picture element into black and white(Y) and color(C) signals to present clearer images than regular video input mode. (Audio signals are delivered through the audio output.) 1 Using an S-Video cable (not included), connect the S-VIDEO OUT terminal on the rear of the DVD player to the S-VIDEO IN terminal of your TV. 2 Using the audio cables, connect
Inhaltszusammenfassung zur Seite Nr. 13
Connections CONNECTIONS Connection to a TV (Interlace) - Connecting to your TV using Component video cables. - You will enjoy high quality and accurate color reproduction images. Component video separates the picture element into black and white(Y), blue(PB), red(PR) signals to present clear and clean images. (Audio signals are delivered through the audio output.) 1 Using component video cables (not included), connect the COMPONENT VIDEO OUT terminals on the rear of the DVD player to the COMPONE
Inhaltszusammenfassung zur Seite Nr. 14
CONNECTIONS Connection to a TV (Progressive) 1 Using component video cables (not included), connect the COMPONENT VIDEO OUT terminals on the rear of the DVD player to the COMPONENT IN terminals of your TV. 2 Using the audio cables, connect the AUDIO (red and white) RED BLUE GREEN OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of your TV. Turn on the DVD player and TV. RED WHITE 3 Audio Cable Press the input selector on your TV remote control until the Comp
Inhaltszusammenfassung zur Seite Nr. 15
Connections CONNECTIONS Connecting to a TV with DVI Jack 1 Using the HDMI-DVI cable (not included), connect the HDMI OUT terminal on the rear of the DVD player to the DVI IN terminal of your TV. 2 Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO RED WHITE (red and white) IN terminals of your TV. Turn on the DVD Audio Cable player and TV. HDMI-DVI cable RED WHITE (not included) 3 Press the input selector on your TV remote control u
Inhaltszusammenfassung zur Seite Nr. 16
CONNECTIONS • HDMI (High Definition Multimedia Interface) HDMI is an interface to enable the digital transmission of video and audio data with just a single connector. Using HDMI, the DVD player transmits a digital video and audio signal and displays a vivid picture on a TV having an HDMI input jack. • HDMI connection description HDMI connector - Both uncompressed video data and digital audio data (LPCM or Bit Stream data). - Though the player uses a HDMI cable, the player outputs only a pure di
Inhaltszusammenfassung zur Seite Nr. 17
Connections CONNECTIONS Connection to an Audio System (2 Channel Amplifier) 1 Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of the Amplifier. 2 Using the video signal cable(s), connect the VIDEO, S-VIDEO, COMPONENT or HDMI OUT terminals on the rear of the DVD player to the VIDEO, S-VIDEO, COMPONENT or DVI IN terminal of your TV as described on pages 11 to 15. RED WHITE 3 Audio Cable Turn on the DVD
Inhaltszusammenfassung zur Seite Nr. 18
CONNECTIONS Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier) 1 If using an optical cable (not included), connect the DIGITAL AUDIO OUT (OPTICAL) terminal on the rear of the DVD player to the DIGITAL AUDIO IN (OPTICAL) terminal of the Amplifier. If using a coaxial cable (not included), connect the DIGITAL AUDIO OUT (COAXIAL) terminal on the rear of the DVD player to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier. 2 Using the video signal cable(s), connect the VIDEO,
Inhaltszusammenfassung zur Seite Nr. 19
Basic Functions Chapter 3 BASIC FUNCTIONS Playing a Disc Before Play - Turn on your TV and set it to the correct Video Input on the TV's remote control. - If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input. After plugging in the player, the first time you press the DVD POWER button, this screen comes up: If you want to select a language, press a NUMBER button. Press 1 for English (This screen will only appear when you plug in the player fo
Inhaltszusammenfassung zur Seite Nr. 20
BASIC FUNCTIONS Note 4 - If the player is left in the stop mode for more than Stopping Play one minute without any user interaction, a screen Press the STOP ( ) button saver will be activated. Press the PLAY/PAUSE during play. ( ) button to resume normal play. - If the player is left in the stop mode for more than 30 minutes, the power will automatically turn off. (Automatic Power-Off Function) 5 Removing Disc Press the OPEN/CLOSE () button. Screen stops, no sound. 6 To resume, press the PLAY/
