Bedienungsanleitung Harbor Freight Tools 67498

Inhaltszusammenfassung zur Seite Nr. 1

Universal pickUp rack
Model 67498
instrUctions and precaUtions
visit our website at: http://www.harborfreight.com
save these instrUctions. read all
precaUtions and instrUctions.
© ®
Copyright 2009 by Harbor Freight Tools . All rights reserved. No portion of this document or any artwork contained herein
may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this
document may not be drawn proportionally. Due to continuing improv

Inhaltszusammenfassung zur Seite Nr. 2

in any direction, bouncing or shifting safety Warnings of load. 1. Do not exceed 1500 lb. capacity for 12. Along with the weight capacity of this over-cab configuration, or 1200 lb. Pickup Rack, be aware of the weight capacity for bed-only configuration. bearing capabilities of the vehicle, Be aware of dynamic loading! suspension, and tires. Sudden movement may briefly create excess load, causing product 13. Driving techniques must take into failure. Vehicle structure may require co

Inhaltszusammenfassung zur Seite Nr. 3

through the top of the rim. You will need asseMbl Y instrUctions to cut holes in the side of a liner if the read the entire iMportant truck bed has a liner, or if the side of the saFetY inForMation truck bed is solid, without an inner rim. section at the beginning of this document including all text under Drilled and Bolted Configuration subheadings therein before set up Post B (13) or use of this product. Washer (20) & Bolt (17) & Front Crossbar (7) Assembled Rail Washer (20) Nut (26

Inhaltszusammenfassung zur Seite Nr. 4

between posts and mark the location for and the smaller bar sits on top of the the bolts on the truck bed. flange at the top of the Posts. Position the Rail so the vertical supports are not attaching the side rails t ogether in the way of attaching the Posts. Bolt (18) Vertical Supports Bolt (19) Washers (22) Nut (25) Left Middle Rail (4) Left Washers (22) Back Rail (6) Nut (25) Figure 4 Figure 6 Slide the Left Middle Rail (4) into the Left note: The vertical supports on the Rail Back Rail

Inhaltszusammenfassung zur Seite Nr. 5

shown on the manual cover, with the extra Rack is ready to secure. Secure in place section over the truck cab. If assembling in through the base of the Posts with the the smaller configuration, skip this section Hex Bolts (17), Washers (20), and Nuts and go to “Completing the Rack” below. If (26), or tighten the Nuts on the J-Bolts, assembling with the over-cab section, attach as needed for your vehicle. the Left Front and Right Front Rails (2 & 1) to 4. Adjust and tighten the Hex Bolts t

Inhaltszusammenfassung zur Seite Nr. 6

please read the FolloWing careFUll Y THe MANUFACTUReR AND/OR DISTRIBUTOR HAS PROVIDeD THe PARTS LIST AND ASSeMBLy DIAgRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS qUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS qUALIFIED TO RePLACe ANy PARTS OF THe PRODUCT. IN FACT, THe MANUFACTUReR AND/OR DISTRIBUTOR ExPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACE

Inhaltszusammenfassung zur Seite Nr. 7

parts list & asseMbl Y diagraM note: Add end caps only to open pipe ends of finished configuration. you will not need to add end caps to Parts #3 and #4 if constructing the over-cab configuration. SKU 67498 For technical questions, please call 1-800-444-3353. Page 7

Inhaltszusammenfassung zur Seite Nr. 8

liMited 90 da Y WarrantY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installati