Inhaltszusammenfassung zur Seite Nr. 1
MCD295
DVD Micro Theatre
User manual
pg001-pg040_MCD295-05-Eng 1 2006.3.24, 17:27
Inhaltszusammenfassung zur Seite Nr. 2
Important notes for users in the U.K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 Remove fuse cover and fuse. 2 Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI approved type. 3 Refit the fuse cover. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5 Amp. If a plug
Inhaltszusammenfassung zur Seite Nr. 3
# $ 1 2 7 5 4 3 9 8 @ 6 ! 0 % 3 pg001-pg040_MCD295-05-Eng 3 2006.3.24, 17:27
Inhaltszusammenfassung zur Seite Nr. 4
1 4 2 6 # 5 8 9 7 7 8 0 0 @ ª ! £ $ 3 ∞ • % ™ § ^ ¡ & ) ( * 4 pg001-pg040_MCD295-05-Eng 4 2006.3.24, 17:27
Inhaltszusammenfassung zur Seite Nr. 5
This product incorporates copyright protection Manufactured under license from Dolby Laboratories. technology that is protected by method claims of certain U.S. patents and other intellectual "Dolby", "Pro Logic" and the double-D symbol property rights owned by Macrovision are trademarks of Dolby Laboratories. Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only
Inhaltszusammenfassung zur Seite Nr. 6
Language Code Abkhazian 6566 Inupiaq 7375 Pushto 8083 Afar 6565 Irish 7165 Russian 8285 Afrikaans 6570 Íslenska 7383 Quechua 8185 Amharic 6577 Italiano 7384 Raeto-Romance 8277 Arabic 6582 Ivrit 7269 Romanian 8279 Armenian 7289 Japanese 7465 Rundi 8278 Assamese 6583 Javanese 7486 Samoan 8377 Avestan 6569 Kalaallisut 7576 Sango 8371 Aymara 6589 Kannada 7578 Sanskrit 8365 Azerhaijani 6590 Kashmiri 7583 Sardinian 8367 Bahasa Melayu 7783 Kazakh 7575 Serbian 8382 Bashkir 6665 Kernewek
Inhaltszusammenfassung zur Seite Nr. 7
Contents General Information Disc Operations Features .................................................................. 9 Playing discs ......................................................... 21 Discs for playback ................................................ 9 Using the disc menu .......................................... 21 Supplied accessories ............................................ 9 Basic playback controls ............................... 21-23 Pausing playback Environmental infor
Inhaltszusammenfassung zur Seite Nr. 8
English Contents System Menu Options Basic operations ................................................. 26 SYSTEM SETUP ............................................ 26-28 TV SYSTEM SCREEN SAVER TV TYPE PASSWORD RATING DEFAULT DIVX(R) VOD registration code LANGUAGE SETUP .......................................... 28 VIDEO SETUP .................................................... 28 BRIGHTNESS CONTRAST HUE SATURATION AUDIO SETUP ............................................. 28-29 DIGITAL OUT DOWN
Inhaltszusammenfassung zur Seite Nr. 9
General Information Features The following formats can’t be supported Additional Component Connections • The files like *.VMA, *.AAC, *.DLF, *.M3U, Lets you connect other audio and audio/visual *.PLS, *.WAV, components to the system so you can use the • The discs recorded under Joliet format system’s surround sound speakers. Region Codes Parental control (rating level) Lets you set a rating level so that your children DVDs must be labeled for ALL regions or Region cannot watch a DVD that has a r
Inhaltszusammenfassung zur Seite Nr. 10
English General Information/Maintenance Do not block the vents Environmental information ● Do not operate the system in an enclosed Any unnecessary packaging has been omitted. cabinet and allow about 10 cm (4 inches) of free We have tried to make the packaging easy to space all around the player for adequate separate into three materials: cardboard (box), ventilation. polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). 10 cm (4 inches) Your system consists of materials whic
Inhaltszusammenfassung zur Seite Nr. 11
General Information/Maintenance Finding a suitable location ● Place the player on a flat, hard, stable surface. ● Install this unit near the AC outlet and where the AC power plug can be reached easily. Cleaning the head and the tape paths ● To ensure good recording and playback quality, clean the head A, the capstan(s) B, and pressure roller(s) C after every 50 hours of tape operation. ● Use a cotton swab slightly moistened with cleaning fluid or alcohol. ● You also can clean the head by playin
Inhaltszusammenfassung zur Seite Nr. 12
English Connections FM wire antenna MW loop antenna 4 3 Speaker Speaker (right) (left) 2 5 AC power cord IMPORTANT! Step 1: Placing speakers – The type plate is located at the rear of the system. Front Front speaker speaker – Before connecting the AC power cord ( left ) ( right ) to the wall outlet, ensure that all other connections have been made. VIEWING AREA –Never make or change any connections with the power switched on. – High voltage! Do not open.You run the risk of getting an el
Inhaltszusammenfassung zur Seite Nr. 13
Connections FM Antenna Step 2: Connecting speakers 1 2 Connect the speaker wires to the SPEAKERS terminals, right speaker to "RIGHT" and left ● For better FM stereo reception, connect an speaker to "LEFT", coloured (marked) wire to outdoor FM antenna to the FM AERIAL (FM "+" and black (unmarked) wire to "-". Fully insert ANTENNA) terminal. the stripped portion of the speaker wire into the terminal as shown. Step 4: Connecting TV Notes: IMPORTANT! – Ensure that the speaker cables are corr
Inhaltszusammenfassung zur Seite Nr. 14
English Connections 2 To hear the sound of this DVD Player through Using an accessory RF modulator your TV, use the audio cables (white/red-not IMPORTANT! supplied) to connect LINE OUT (L/R) jacks of – If your TV set only has a single the DVD Player to the corresponding AUDIO Antenna In jack (or labelled as 75 ohm or IN jacks on the TV. RF In), you will need a RF modulator in Using S-Video In jack order to view the DVD playback via TV. See your electronics retailer or contact Philips for details
Inhaltszusammenfassung zur Seite Nr. 15
Connections Using the VCR for recording DVDs B Step 5: Connecting the power Connect one of the system's VIDEO OUT cord jacks to the corresponding VIDEO IN jack and IMPORTANT! LINE OUT (R/L) jacks to the AUDIO IN jacks –Never make or change any connection on the VCR. This will allow you to make analogue with the power switched on. stereo (two channel, right and left) recordings. After everything is connected properly, plug in Recording (digital) C the AC power cord to the power outlet. Conn
Inhaltszusammenfassung zur Seite Nr. 16
English Controls Controls on the system 9 LOUDNESS – enables or disables automatic loudness 1 ECO POWER/STANDBY-ON y adjustment. – switches the system on or to Eco power/normal standby mode. 0 DBB – enables or disables bass enhancement. 2 iR sensor – infrared sensor for remote control. ! DSC – selects different types of preset sound equalizer 3 CLOCK/RDS settings (CLASSIC, JAZZ, POP or ROCK). For Tuner – selects RDS information. @ VOLUME Standby mode – adjusts the volume upward/downw
Inhaltszusammenfassung zur Seite Nr. 17
Controls 6 DISC MENU (disc mode only) * DSC –DVD/VCD: enters or exits the disc contents – selects different types of preset sound equalizer menu. settings (CLASSIC, JAZZ, POP or ROCK). – VCD2.0: switches the playback control mode on ( DBB or off . – enables or disables bass enhancement. 7 22/33 ) MUTE Tuner – to interrupt or resume sound reproduction. – press to tune to a lower/higher radio frequency ¡ DISPLAY (OSD) gradually. – displays information on TV screen during – press and hold, then rel
Inhaltszusammenfassung zur Seite Nr. 18
English Preparations IMPORTANT! Step 2: Setting the clock – Make sure to complete the preparation procedures before operating 1 Go to Standby mode. the system. 2 Press and hold CLOCK/RDS on the front panel. Step 1: Inserting batteries into ➜ “SET CLOCK” is displayed briefly. Then, the the remote control hour digits flash on the display screen. 3 Turn the VOLUME control on the front panel or press VOLUME +/- on the remote to set the hours. 4 Press CLOCK/RDS again. ➜ The minute digits flash on the
Inhaltszusammenfassung zur Seite Nr. 19
Preparations PAL Step 3: Setting video – If the connected TV is PAL system, select this preference mode. It will change the video signal of a NTSC IMPORTANT! disc and output in PAL format. – Make sure you have completed all the AUTO necessary connections. (See – If the connected TV is multi system, select this "Connections-Connecting TV".) mode.The output format will be in accordance with the video signal of the disc. – Setting TV TYPE Select the aspect ratio of the TV to be connected. 4:3 PS (P
Inhaltszusammenfassung zur Seite Nr. 20
English Preparations Note: OSD LANGUAGE (On-Screen Display) The format you select must be available on the Switches the display language on the TV screen. disc. If it is not, the setting for TV Type will not affect Select the language from the displayed list. the picture during playback. AUDIO LANG (DVD only) Switches the display language of the sound track. To exit the menu Select the language from the displayed list. Press SYSTEM MENU again. SUBTITLE LANG (DVD only) Switches the display langua
