Bedienungsanleitung Philips MCD139B/05

Inhaltszusammenfassung zur Seite Nr. 1

1
Quick Start Guide
2
MCD139B
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
+
VOL
1 2 3 GOTO
4 5 6 ZOOM
7 8 9 DSC
Remote contr PROG SUBTITLE ol with one
0 DBB
Composite Video Cable DIN cable
CR2025 battery loaded
User manual
FM wire antenna Quick start guide
MCD139B QSG_12_Eng 1 2007.5.23, 15:58

Inhaltszusammenfassung zur Seite Nr. 2

1 Connect the speaker wires of the right speaker and subwoofer to the left speaker. Important! – This set can only be operated after the 2 supplied DIN cable has been connected. Connect the supplied FM wire antenna. Tips 3 –For connecting to a Progressive Scan Connect the left speaker and the DVD player by using the supplied TV, refer to the user manual for proper DIN cable. connections and detailed setup. 4 Connect the DVD player to your TV using the supplied composite video cable. 5 Connect th

Inhaltszusammenfassung zur Seite Nr. 3

Setting the clock 1 In standby or any source mode, press and hold CLOCK on the remote control. The clock digits will be lighted on the display. 2 Press ¡ / ™ on the set repeatedly to set the hours. I + 3 VOL Press à / á on the set repeatedly to set the minutes. 4 Press CLOCK again to store the setting. Setting DVD menu options IMPORTANT! If the progressive scan feature is activated but the connected TV does not support progressive signals or the video cables are not connected accordingly, see th

Inhaltszusammenfassung zur Seite Nr. 4

Playing a disc 1 Push OPEN /CLOSEç to open the disc door. 2 Load in a disc with the label side facing up, then close the disc door. To switch on the system, 3 press STANDBY ONB or Playback will start automatically. If not, pressÉÅ. SOURCE on the set, or DISC, AUX1/2/TV or TUNER on the remote. 4 To stop playback, press 9. Programming and tuning to radio stations 1 Press SOURCE (or TUNER on the remote) to select tuner source (FM). 2 Press and hold PROG on the set (or on the remote control) until “