Inhaltszusammenfassung zur Seite Nr. 1
®
The company behind Viper Auto Security Systems is Directed Electronics.
Since its inception, Directed Electronics has had one purpose, to provide consumers
with the finest vehicle security and car stereo products and accessories available.
The recipient of nearly 100 patents and Innovations Awards in the field of advanced
electronic technology, Directed Electronics is ISO 9001 registered. Quality Directed
Electronics products are sold and serviced throughout North America and around the
Inhaltszusammenfassung zur Seite Nr. 2
Congratulations Congratulations on the purchase of your state-of-the-art remote start and security system. Reading this owner’s guide prior to using your sys- tem will help maximize the use of your system and its many features. For more information please visit the below website: http://www.viper.com – For general and additional guide infor- mation. For any additional questions please contact your authorized Directed dealer or contact Directed at 1-800-753-0600. What you get Welcome to the
Inhaltszusammenfassung zur Seite Nr. 3
Important information Government Regulations and Safety information Read the Government Regulations and Warning! Safety First sections of this manual prior to operating this system. Warning! Failure to heed this information can result in death, personal injury or property damage and may also result in the illegal use of the system beyond its intended purpose. Your Warranty Your Responder LE system comes with a warranty. Please make sure you receive the warranty registration card and proo
Inhaltszusammenfassung zur Seite Nr. 4
Contents Responder LE ...................................................................................................... 2 Remote Control Command Table ............................................................ 3 Basic Commands (Direct Access) .......................................................................... 4 Lock ................................................................................................... 4 Unlock ...........................................................
Inhaltszusammenfassung zur Seite Nr. 5
Responder LE Internal Antenna Transmit LED Command LED’s Buttons AUX Function Button Feature Description Internal Antenna Used for transmitting and receiving* information Command buttons (4) Used to perform locking, unlocking, auxiliary channel and remote start commands Function button Used to access function levels for advanced commands. LED’s Each button has an associated LED next to it that is active during related operations. These LED’s are labeled respec- tively as: Lock LED, Unlock LED
Inhaltszusammenfassung zur Seite Nr. 6
Control Center Programming button Antenna Status LED The Control Center, typically located on the upper part of the front windshield sends and receives commands or messages to and from your system. It consists of: The In-vehicle system antenna, for 2 way communication. The Status LED, as a visual indicator of the system’s status. The programming (control) button, for programming system func- tions. Remote Control Command Table Direct Access Level x 1 x 2 Button LEVEL 1 LEVEL 2 Lock (Pan
Inhaltszusammenfassung zur Seite Nr. 7
Basic Commands (Direct Access) Lock Press one time to Lock Lock LED turns on with 1 beep. Press and hold for 2 seconds to Lock the system and then activate the Panic output Unlock Press one time to unlock Unlock LED turns on and remote beeps twice. Remote Start Press one time to activate Remote Start Remote Start LED turns on with remote start tones. AUX/Trunk Press and hold AUX for 2 seconds to activate the Trunk Release. The AUX LED turns on and AUX activation tone sounds. This is an op-
Inhaltszusammenfassung zur Seite Nr. 8
To enter Panic Mode: Press button on the remote for 2 seconds. The horn honks and the parking lights flash for 30 seconds. To stop Panic Mode at any time: Press again. Notes: Horn honk is an optional feature. The panic and horn honk feature is available when this option is installed. Pressing more than one button simultaneously generates an error tone and the Function LED turns on, and all other LEDs flash. © 2009 Directed Electronics. All rights reserved. 5
Inhaltszusammenfassung zur Seite Nr. 9
Advanced Commands: (Levels 1 - 2) Press and release the button the corresponding amount of times indicated below. The LED illuminated indicates level 1. The LED and AUX LED illuminated indicates level 2. AUX 1 (Sliding Door*) Press one time and then press AUX AUX 2 (Sliding Door*) Press two times and then press AUX Activates (or if On, deactivates) the Aux 1 or 2 output respectively. The Aux LED and On tones or Off tones play to confirm. Note: These are optional features. See your authoriz
Inhaltszusammenfassung zur Seite Nr. 10
Remote Start Read this user guide, including the warnings section before using the remote start. Ensure that the vehicle is parked in an open area, not in a garage. To use your remote start to pre-warm or pre-cool your vehicle, remember to set the climate controls to the desired settings before shutting off the engine. Remote starting your vehicle Press the button on the remote control. The vehicle parking lights flash. The Remote Start LED flashes and ascending Remote Start tone plays. The
Inhaltszusammenfassung zur Seite Nr. 11
that the MTS mode is properly set when parking. If MTS mode is not properly set or is defeated after being properly set the system will not start the engine. 1. With the engine running and transmission in NEUTRAL position, set the parking brake and leave the engine running. All Doors should be closed. 2. Release the foot brake (if pressed during Step 1), or press and release the foot brake anytime. As long as the engine is running there is no time limit to perform this step. 3. Within 20 s
Inhaltszusammenfassung zur Seite Nr. 12
Timer Mode This unit can be programmed to start and run the engine every three hours, for a maximum of six cycles. The engine will run for the pro- grammed run time and then shut down. After three hours, the system will restart the engine. Note: This feature works only when the system has been locked with the remote control. Important: Timer Mode should be used in open areas only. Never start and run the vehicle in an enclosed space such as a garage or carport. To activate timer mode with
Inhaltszusammenfassung zur Seite Nr. 13
Valet Mode You can prevent your system from remote starting. When the system is in Valet mode, the feature is disabled. The doors do not automatically lock. This is useful when washing or having the vehicle serviced. To enter or exit Valet mode with the programming button: 1. Turn the ignition key on and then off. 2. At anytime during the next 10 seconds, press and release the programming button on the control center. The LED turns on solid when you enter valet mode, and turns off when you
Inhaltszusammenfassung zur Seite Nr. 14
Battery Information The system requires no specific maintenance. The 2- way remote con- trol uses two CR2016 cell batteries. Low Battery When the batteries are low, the 2- way remote emits two groups of beeps, the LED flashes, and additional horn honks are emitted when unlocking. It is time to change the batteries. Note: Horn honk is an optional feature. Battery Replacement Rear View 1. Slide the battery cover up by ap- 1 2 plying equal pressure at its top and bottom (the arrow on the cover
Inhaltszusammenfassung zur Seite Nr. 15
Out of Range Notification If a command is issued from the remote, but the remote is beyond the range of the vehicle to receive the command, the remote will respond with an out-of range notification. If this occurs, the transmit indicator on the remote flashes rapidly, the key LED turns on, and the remote emits the error tone sounds. Since conditions will vary in different areas (i.e.: Weather, RF interfer- ence, etc) range may be affected and require you to be closer to the vehicle for succe
Inhaltszusammenfassung zur Seite Nr. 16
Safety Government Regulations This device complies with Part 15 of FCC rules. Operation is subject to the fol- lowing two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protect
Inhaltszusammenfassung zur Seite Nr. 17
Warning! Safety First Please read the safety warnings below before proceeding. Improper use of the product may be dangerous or illegal. Installation Due to the complexity of this system, installation of this product must only be performed by an authorized Directed dealer. If you have any questions, ask your retailer or contact Directed directly at 1-800-753-0600. Remote Start Capable When properly installed, this system can start the vehicle via a command signal from the remote control trans
Inhaltszusammenfassung zur Seite Nr. 18
Safety Before remote starting a manual transmission vehicle, be sure to: Leave the vehicle in neutral and be sure no one is standing in front or behind the vehicle. Only remote start on a flat surface Have the parking brake fully engaged WARNING! It is the responsibility of the owner to ensure the parking/emer- gency brake properly functions. Failure to do so can result in personal injury or property damage. We recommend the owner have the parking / emergency brake system inspected and adju
Inhaltszusammenfassung zur Seite Nr. 19
GEAR IS CONTRARY TO ITS INTENDED MODE OF OPERATION. OPER- ATING THE REMOTE START SYSTEM UNDER THESE CONDITIONS MAY RESULT IN PROPERTY DAMAGE OR PERSONAL INJURY. YOU MUST IMME- DIATELY CEASE THE USE OF THE UNIT AND SEEK THE ASSISTANCE OF AN AUTHORIZED Directed DEALER TO REPAIR OR DISCONNECT THE INSTALLED REMOTE START MODULE. DIRECTED WILL NOT BE HELD RESPONSIBLE OR PAY FOR INSTALLATION OR REINSTALLATION COSTS. This product is designed for fuel injected vehicles only. Use of this product in a
Inhaltszusammenfassung zur Seite Nr. 20
Français
