Inhaltszusammenfassung zur Seite Nr. 1
DVD PLAYER
DV-970HD
ADVANCED
SETUP GUIDE
A SUPPLEMENT TO THE
USER MANUAL
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents Table of Contents................................................................................ 1 HOW TO USE THIS GUIDE................................................................... 2 Using the DVD Setup Menu System .............................................................................................. 3 SETTING UP THE PLAYER: BASICS.................................................... 4 Use the Best Available Video Connection ............................
Inhaltszusammenfassung zur Seite Nr. 4
HOW TO USE THIS GUIDE This guide is written in a very procedural manner. Unlike most User Manuals which read like dictionaries and are only slightly less interesting, OPPO was kind enough to allow us to contribute to a “kindler and gentler” Setup Guide that takes you through the setup process the way we do it – almost every week of our lives. So, forget what you know. If you want to learn how to point a remote control, put in batteries, or find out that it’s bad to leave a D
Inhaltszusammenfassung zur Seite Nr. 5
HOW TO USE THI S GUI DE Using the DVD Setup Menu System In many places of this guide, the DVD player’s Setup Menu needs to be adjusted to match your specific audio/video configuration. To access the DVD player’s Setup Menu simply press the SETUP button on the remote control when the disc is stopped. When asking you to make menu adjustments, we will use the following terminology to indicate the location of the desired function: Setup Menu Name > Menu Item > Submenu Item (or Selection)
Inhaltszusammenfassung zur Seite Nr. 6
SETTING UP THE PLAYER: BASICS Follow these simple steps to successfully set up your player for use in your system Use the Best Available Video Connection Rear Panel Or HDMI (included) or HDMI-to-DVI Cable BEST DVI In Component Video Cable (optional) (Y) (Pb/Cb) BETTER (PrCr) Video Cable (yellow, included) Video In GOOD S-Video Cable (optional) S-Video If an HDMI or DVI connection is present on your television or display, use it. The OPPO DVD player has an HDMI (digital) video output whi
Inhaltszusammenfassung zur Seite Nr. 7
SETTI NG UP THE P L AYER: BASI CS If you have a widescreen (16:9) display as pictured on the left, select one of these options: • 16:9 Wide – 16:9 (widescreen) sources will be displayed in their native aspect ratio, and 4:3 sources will be stretched. • 16:9 Wide/SQZ – 16:9 (widescreen) as well as 4:3 sources will be displayed in their native aspect ratio. Please note that in this mode 4:3 sources will be displayed with black borders on both sides to maintain the correct 4:3 aspect ratio.
Inhaltszusammenfassung zur Seite Nr. 8
SETTI NG UP THE P L AYER: BASI CS Use the Best Available Audio Connection Connections for Most CD or DVD Playback Rear Panel Analogue Audio Cables (Red/White) GOOD BEST Coaxial In Audio In Optical In Connect ONE of these digital audio cables: AV Receiver/Integrated Amplifier Coaxial S/PDIF or Optical S/PDIF If at all possible you will want to connect audio using digital cables (either coaxial S/PDIF or optical S/PDIF). If your receiver or integrated amplifier does not have Dolby Digit
Inhaltszusammenfassung zur Seite Nr. 9
SETTI NG UP THE P L AYER: BASI CS But, Wait – I Have HDMI! Rear Panel BEST HDMI (included) or HDMI-to-DVI Cable DVI In AV Receiver/Integrated Amplifier HDMI can transmit both audio AND video signals over a single cable. If you have an HDMI-capable display or, better yet, an HDMI-capable receiver that can support HDMI audio, you are in luck. Simply run an HDMI cable from the OPPO DVD player to your display or receiver and enable HDMI audio (if necessary) on that device (see your receiv
Inhaltszusammenfassung zur Seite Nr. 10
SETTI NG UP THE P L AYER: BASI CS Connections for Non-Dolby Digital/DTS Receivers, DVD-Audio and SACD Receiver/Amplifier with 5.1ch Audio Input Dolby Pro Logic Receivers If you have an older Dolby Pro Logic surround receiver that does not support Dolby Digital or DTS but has multi- channel inputs, you will want to connect the 6 analogue outputs of the OPPO DVD player to the analogue multi- channel inputs of your receiver. To do this you must: • Use six (6) analogue RCA-style cables and s
Inhaltszusammenfassung zur Seite Nr. 11
SETTING UP THE PLAYER: ADVANCED Setup Menu Options The following is an advanced tour of the Setup Menu options which enables control over how your DVD player functions in various situations and with various program material and hardware. The OPPO DV- 970HD DVD player comes with a “safe” default configuration, so you should get performance out of your player even if you don’t touch the Setup Menu system. For those of you wanting to understand more and really tweak your settings, read on…
Inhaltszusammenfassung zur Seite Nr. 12
SETTI NG UP THE P L AYER: A DVANCED General Setup Page 1. TV Display: This is a primary setting and is addressed in the Setting Up the Player: Basics section. To set the aspect ratio of the DVD player’s output image to match your TV, select from the following: • 16:9 Wide – 16:9 (widescreen) sources will be displayed in their native aspect ratio, and 4:3 sources will be stretched. • 16:9 Wide/SQZ – 16:9 (widescreen) as well as 4:3 sources will be displayed in their native aspect ra
Inhaltszusammenfassung zur Seite Nr. 13
SETTI NG UP THE P L AYER: A DVANCED 6. DVD-Audio Mode: To select which portion of a hybrid DVD-Audio disc to playback. The options are: • DVD-Audio – Play the DVD-Audio portion of the disc with surround audio • DVD-Video – Play the DVD-Video portion of the disc with Dolby Digital or DTS audio 7. DivX VOD: Select this to display the device registration code for DivX Video on Demand service (also exits the Setup Menu). To learn more, visit www.divx.com/vod Speaker Setup Page
Inhaltszusammenfassung zur Seite Nr. 14
SETTI NG UP THE P L AYER: A DVANCED Analogue Multi-Channel Output Settings The following settings only affect the analogue multi-channel outputs, not the digital coaxial or optical outputs of the DVD player. We recommend using the analogue multi-channel outputs of this player only when you are playing SACD or DVD-Audio discs and/or cannot utilize HDMI or the digital audio outputs with your audio system. 2. Front Speaker: To set the sound filtering control for the front speakers. The
Inhaltszusammenfassung zur Seite Nr. 15
SETTI NG UP THE P L AYER: A DVANCED for your system. Your Front Right and Left speakers should measure the same distance. If they do not, please adjust them if possible. • Press the UP/DOWN ARROW buttons to select the first speaker to configure. • Measure the distance (in inches) from that speaker to the listening position. If it is LESS than the distance to the Front Left speaker, enter the difference (as close as possible) in inches using the LEFT/RIGHT ARROW buttons. If it is GREATER
Inhaltszusammenfassung zur Seite Nr. 16
SETTI NG UP THE P L AYER: A DVANCED 7. Channel Trim: To set the volume of each individual channel. • Press the LEFT/RIGHT ARROW buttons to select the channel to be adjusted. • Press the UP/DOWN ARROW buttons to raise or lower the volume of the selected channel in 0.5dB increments. • Press the SELECT button to confirm the settings and return to the Speaker Setup Page. Audio Setup Page 1. EQ Type (None/Rock/Pop/Live/Dance/Techno/Classic/Soft): This sets a corresponding equa
Inhaltszusammenfassung zur Seite Nr. 17
SETTI NG UP THE P L AYER: A DVANCED 5. Audio Tone (+/-16): This function raises or lowers the tone (key/pitch) of the audio track. This is useful for playing Karaoke discs and should not be used for regular music listening or movies. • Press the SELECT button to show the tone control window. • Press the LEFT/RIGHT ARROW buttons to lower or raise the tone/pitch. • Press the SELECT button to confirm the setting. 6. Pro Logic II: Taking a step further than most DVD players, the OPPO
Inhaltszusammenfassung zur Seite Nr. 18
SETTI NG UP THE P L AYER: A DVANCED 7. Dolby Digital Setup: To configure the Dolby Digital decoder, press the SELECT button to enter the Dolby Digital Setup page and press the LEFT ARROW button to exit the Dolby Digital Setup page. A. Dual Mono: To choose the output for Dolby Digital discs encoded with two independent audio channels, such as bilingual programs. The options are: • Stereo – Stereo output • L-Mono – Left channel output to both Left and Right speakers. • R-Mono
Inhaltszusammenfassung zur Seite Nr. 19
SETTI NG UP THE P L AYER: A DVANCED 2. Brightness: Adjusts the brightness (black level) of the video output. • Press the SELECT button to show the Brightness scale, and then use the LEFT/RIGHT ARROW buttons to adjust. • Press the SELECT button to confirm the new setting. 3. Contrast: Adjusts the contrast (white level) of the video output. The ability to set brightness and contrast is no small thing. If you do not have the correct black and white levels then your images can appe
Inhaltszusammenfassung zur Seite Nr. 20
SETTI NG UP THE P L AYER: A DVANCED Preference Page The Preference Page can only be accessed when playback is completely stopped, or when there is no disc in the DVD player. 1. TV Type: Sets the output video system (PAL/NTSC) to match the type of TV. The options are: • Auto – No system conversion is performed. The output video system is the same as that encoded on the disc. This requires a TV that supports NTSC and PAL input. • PAL – When playing PAL-encoded discs, no system
