Inhaltszusammenfassung zur Seite Nr. 1
®
The company behind Clifford Auto Security Systems
is Directed Electronics.
Vista, CA 92081
www.clifford.com
Since its inception, Directed Electronics has had one
purpose, to provide consumers with the finest vehicle
security and car stereo products and accessories
available. The recipient of nearly 100 patents and
Innovations Awards in the field of advanced electronic
technology, Directed Electronics is ISO 9001 registered.
™
THE SCIENCE OF SECURITY
Quality Directed Electronics products
Inhaltszusammenfassung zur Seite Nr. 2
Congratulations Congratulations on the purchase of your state-of-the-art security system. Reading this owner’s guide prior to using your system will help maxi- mize the use of your system and its many features. For more informa- tion please visit the below website: http://www.clifford.com – For general and additional guide in- formation. For any additional questions please contact your authorized Directed dealer or contact Directed at 1-800-753-0600. What you get Welcome to the best generat
Inhaltszusammenfassung zur Seite Nr. 3
Important information Your Warranty Your system comes with a warranty. Please make sure you receive the warranty registration card and proof of purchase from your dealer indicating the product was installed by an authorized Directed dealer. Your product warranty must be validated within 10 days of purchase. You can validate it online at www.prodregister.com/directed or com- plete and return the warranty registration card. Quick Reference Card Carry this card with you to reference your syst
Inhaltszusammenfassung zur Seite Nr. 4
Contents Getting Started .................................................................................................... 4 Charging the Remote Control ................................................................ 4 Keys to using this Manual ..................................................................... 5 Responder LC 2-Way........................................................................................... 6 Status Screen Icons ...............................................
Inhaltszusammenfassung zur Seite Nr. 5
Clock Set .......................................................................................... 24 Review ............................................................................................. 24 Exit .................................................................................................. 24 Sensor Adjust: ................................................................................... 24 Pair a Responder LC remote control: ...............................................
Inhaltszusammenfassung zur Seite Nr. 6
Glossary of Terms .............................................................................................. 44 Government Regulations .................................................................................... 46 Additional information ....................................................................................... 47 Interference ....................................................................................... 47 Upgrades and Batteries ................................
Inhaltszusammenfassung zur Seite Nr. 7
Getting Started Your remote control is powered by an internal rechargeable battery that can only be serviced by an authorized Directed dealer. Due to transit and storage time prior to your purchase, the battery charge may have depleted. To ensure proper operation, check the battery level and connect the battery charger if not fully charged. See Bat- tery Information and Status Screen Icons sections for more information about the battery. Charging the Remote Control 1. Plug the AC adapter in
Inhaltszusammenfassung zur Seite Nr. 8
Keys to using this Manual Specific actions (in bold type) and style conventions are used consis- tently throughout this manual, they are as follows: Press: implies pushing in and releasing a button. Hold: is used after “press” actions when a button needs to be held in position for an extended period of time, typically several seconds. ARMED this style denotes the text which appears in the text field portion of the display during operations described in the manual. If the text string is too
Inhaltszusammenfassung zur Seite Nr. 9
Responder LC 2-Way Internal Antenna Display Function Button Command Buttons Mini-USB Port Feature Description Internal Antenna Used for transmitting and receiving information Display Status screen - the upper portion of the display contains status icons for the system, siren, alarm zones, and remote control Text field - the lower portion of display shows the clock, command confirmations, page messages and programming menus Command Buttons (4) Used to perform arming, disarming and auxiliary ch
Inhaltszusammenfassung zur Seite Nr. 10
Control Center Control Center Button Control Center LED The control center, typically located on the upper part of the front windshield sends and receives commands or messages to and from your system. It consists of: The In-vehicle system antenna, for 2 way communication. The control center LED, as a visual indicator of the system’s sta- tus. The control center button, for placing the system into valet mode* and to perform the emergency override** operation. * See Remote and System
Inhaltszusammenfassung zur Seite Nr. 11
Status Screen Icons ALL 1 Status Screen Icons Text Field The table below describes all the status screen icons. Icon Description Armed: The system is armed, the alarm is enabled Locked: The system is locked in valet, the alarm is disabled Disarmed: The system is disarmed, the alarm is disabled Unlocked: The system is unlocked in valet, the alarm is disabled Siren is disabled for sensor triggers; remote is paged for all trig- gers (sensor silent arm) Siren is disabled for all triggers; remote is
Inhaltszusammenfassung zur Seite Nr. 12
Icon Description On during a sensor zone full trigger output On during fault report to indicate a sensor is active and bypassed when arming On during the door zone full trigger output On during fault report to indicate a door is open and bypassed when arming On during a hood zone full trigger output On during fault report to indicate the hood is open and bypassed when arming On when remote is set to command the system programmed as car 1* On when remote is set to command the system programme
Inhaltszusammenfassung zur Seite Nr. 13
Icon Description Text field Displays the clock, message text and feature menus On after the garage open** message has been received On after the garage closed** message has been received Remote start is active, the engine is running (with optional remote start module only) * This icon not present until the car 2 is turned on in the Setup Remote configuration menu. ** This icon not present until the remote is paired with an optional garage door opener. © 2009 Directed Electronics. All rights
Inhaltszusammenfassung zur Seite Nr. 14
Using your System Commands and Confirmations Commands, basic or advanced, are used to activate system fea- tures and are performed by pressing one of the command buttons. Basic commands control the most often used security features while advanced commands control more specialized features and request reports. Confirmations for basic or advanced commands are indicated first by siren chirps and parking light flashes, and then by text, icons and beeps or tones on the remote control. A description
Inhaltszusammenfassung zur Seite Nr. 15
Responder LC Command table Direct Access Level x 1 x 2 x 3 x 4 Button LEVEL 1 LEVEL 2 LEVEL 3 LEVEL 4 Arm/Lock Silent Arm Sensor Sensor Silent Full Silent (Panic) Bypass Arm Arm Disarm/Unlock Silent Disarm Remote Valet Car Finder Remote Start*/ Aux 1/4** Aux/Trunk AUX 1 AUX 2 AUX 3 AUX 4 A U X Advance Level Alarm Change Car Report (3s), Enter programming (8s) * Available only with optional remote start module installation ** This button can command either aux 1 or aux 4 if turned on by an
Inhaltszusammenfassung zur Seite Nr. 16
Basic Commands (Direct Access) Arm Press and release 6:30 The alarm arms, doors lock (if connected), and the siren ARMED chirps and parking lights flash once. The text and beeps play to confirm and the system status icons update. If valet mode* is on, the doors lock and the VALET text and tone play. Exit valet mode to arm the alarm normally. If a trigger zone fault is detected the siren chirps once again and the trigger zone fault report** plays. To Arm and Panic Press and hold The a
Inhaltszusammenfassung zur Seite Nr. 17
AUX/Trunk AUX Press and hold The trunk opens (if connected) when this button is pressed for 2 sec- onds. The TRUNK text and tones play to confirm. Remote Start /AUX 1/ AUX 4 Press and release Remote Start*** Activates (or if on, deactivates) the remote starter. The engine and parking lights turn on or off accordingly. The REMOTE START ON text and tones play, or the REMOTE START OFF text and tones play to confirm. The icon is displayed in the status screen while the engine is running. AUX 1/
Inhaltszusammenfassung zur Seite Nr. 18
Advanced Commands: (Level 1) Press and release the button 1 time. level 1 Silent Arm Press and release The alarm arms, doors lock (if connected), and the parking lights flash once. The SILENT ARMED text plays to confirm and the system status icons update. Valet mode* or trigger zone fault report** messages may be received. Silent Disarm Press and release The alarm disarms, doors unlock (if connected), and the parking lights flash twice. The SILENT DISARM text plays to confirm and the system s
Inhaltszusammenfassung zur Seite Nr. 19
Advanced Commands: (Level 2) Press and release the button 2 times. Sensor Bypass level 2 Press and release Performing the sensor bypass command will incrementally bypass sen- sor operations and be confirmed as follows: Warn-away bypass: The parking lights flash 2 times, BYPASS WARN 1 beep and 1 fault tone play to confirm. Sensors will be activated for full trigger levels of impact only. Warn-away full trigger bypass: The parking lights flash 3 times, BYPASS FULL , 1 beep and 2 fault tones pla
Inhaltszusammenfassung zur Seite Nr. 20
Advanced Commands: (Level 3) Press and release the button 3 times. Sensor Silent Arm* level 3 Press and release The alarm arms, doors lock, the siren chirps and parking lights flash 3 times. The SENSOR SILENT ARM text and beeps play to confirm and the system and siren status icons update. Car finder Press and release The siren emits one long chirp and the parking lights flash for 10 seconds. The CAR FINDER text and beeps play to confirm. The parking light flashes stop if armed or disarmed
