Inhaltszusammenfassung zur Seite Nr. 1
WBX-6200F-V
VIA Eden/C3 Fanless Micro PC
User’s Manual
Version 1.0
Inhaltszusammenfassung zur Seite Nr. 2
Copyright Notice Copyright © 2005 All Rights Reserved. Printed in Taiwan. This publication is protected by copyright and all rights are reserved. No part or whole of it may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording without prior consent of I-Tech TECHNOLOGY CORP. The information in this document has been carefully checked and is believed to be accurate. However, I-Tech TECHNOLOGY CORP. assumes no responsib
Inhaltszusammenfassung zur Seite Nr. 3
Safety Precautions Before getting started, read the following important cautions. 1. The WBX-6200F-V may not come equipped with an operating system. An operating system must be loaded first before installing any software into the computer. 2. Be sure to ground yourself to prevent static charge when installing the internal components. Use a grounding wrist strap and place all electronic components in any static-shielded devices. Most electronic components are sensiti
Inhaltszusammenfassung zur Seite Nr. 4
technician is allowed to do so. Integrated circuits on computer boards are sensitive to static electricity. To avoid damaging chips from electrostatic discharge, observe the following precautions: Before handling a board or integrated circuit, touch an unpainted portion of the system unit chassis for a few seconds. This will help to discharge any static electricity on your body. When handling boards and components, wear a wrist-grounding strap, available from most
Inhaltszusammenfassung zur Seite Nr. 5
Acknowledgments All product names or trademarks are properties of their respective owners. V
Inhaltszusammenfassung zur Seite Nr. 6
（This page does not contain any information ） VI
Inhaltszusammenfassung zur Seite Nr. 7
Table of Contents How to Use This Manual ................................................. IX Chapter 1 System Overview .............................. 1 Introduction................................................................... 1 Features........................................................................ 1 System Specification....................................................... 3 System View.................................................................. 4 I/O connector
Inhaltszusammenfassung zur Seite Nr. 8
of CPU Board ................................................... 43 Jumpers Location and list ...............................................43 Jumper List...................................................................44 Jumper Setting..............................................................44 Connector Definitions.....................................................46 Connectors Location......................................................46 Appendix B. System Assembly Refer
Inhaltszusammenfassung zur Seite Nr. 9
How to Use This Manual This manual is written for the system integrator, PC technician and knowledgeable PC end user. It describes how to configure your WBX-6200F-V series to meet various operating requirements. The user’s manual is divided into four chapters, with each chapter addressing a basic concept and operation of the server board. Chapter 1: System Overview - presents what you have inside the box and gives you an overview of the product specifications and basic system archi
Inhaltszusammenfassung zur Seite Nr. 10
System Overview Introduction WBX-6200F-V series are based-on the features of high performance, cost-effective for VIA C3 or Eden platform with low power consumption. WBX-6200F-V is mainly designed for industrial automation with slim and true fanless feature. With GPIO connector for data collection and device control, and storage can support internal DOM and external Compact Flash memory card, or one 2.5” HDD. Features The WBX-6200F-V features: CPU VIA C3 1GHz, optional for Ede
Inhaltszusammenfassung zur Seite Nr. 11
95/97/98, Card-32(32 bit), PCMCIA V2.1/JEIDA 4.2(16 bit), supports type I/II CF interface 1 x bootable Compact Flash slot for CF type I/II storages via IDE/CF adaptor (PCMCIA and CF cannot be used simultaneously) Mini-PCI interface 1 x 32-bit Mini-PCI socket (support 802.11b/g and DVB modules) Audio Function Dual full-duplex Direct Sound channel between system memory and AC97 link, standard AC97 codec interface with Line-in, Line-out and Microphone-in ports Ethernet Functio
Inhaltszusammenfassung zur Seite Nr. 12
System Specification NOTE: Specifications are subject to change without notice. Parts Specifications System CPU VIA Eden 733MHz / C3 1GHz Board System One DDR SO-DIMM socket, support memory up to 1GB I/O - VGA port x 1 / DVI x 1 interfaces - Serial port (RS-232 x 1, RS-232 /422/485 x 1) - Parallel port x 1 - PS/2 keyboard/mouse port - GPIO: 4-bit input, 4-bit output - LAN RJ-45 x 1 USB and Audio Four USB 2.0 ports Microphone input connector Line input connector Line ou
Inhaltszusammenfassung zur Seite Nr. 13
System View Outline Drawing CF interface: PCMCIA interface: 4
Inhaltszusammenfassung zur Seite Nr. 14
I/O connectors 5
Inhaltszusammenfassung zur Seite Nr. 15
Unpacking After unpacking the shipping carton, you should find these standard items: The WBX-6200F-V Micro PC Accessory box including the followings: – AC adapter x 1 – AC power cord x 1 – 44-pin 2.0mm pitch IDE cable x 1 – Y cable for PS2 keyboard and mouse x 1 – Mounting bracket x 2, screw x 8 – CD-ROM for drivers, utility, and user manual – Quick installation Guide Inspect all the items. If any item is damaged or missing, notify your dealer immediately. 6
Inhaltszusammenfassung zur Seite Nr. 16
Getting Started This chapter tells you how to set up the system. Setting Up the System The following is a summary of the steps in setting up the system for use. CAUTION: Make sure that power to the system and each of the devices to be connected is switched OFF before plugging in the connectors. 1. Make any required external connections such as the keyboard, and mouse. 2. Plug the appropriate end of the power cord into the power connector of the system. Then plug the other end
Inhaltszusammenfassung zur Seite Nr. 17
Installing System Software Recent releases of operating systems from major vendors include setup programs, which load automatically and guide you through hard disk preparation and operating system installation. The guidelines below will help you determine the steps necessary to install your operating system on the Micro PC hard drive. NOTE: Some distributors and system integrators may have already pre-installed system software prior to shipment of your Micro PC. Installing soft
Inhaltszusammenfassung zur Seite Nr. 18
Installing the Drivers After installing your system software, you will be able to set up the LAN, VGA, Audio and USB functions. All drivers are stored in a CD disc, which can be found in your accessory pack. The various drivers and utilities in the disc have their own text files that help users install the drivers and understand their functions. 9
Inhaltszusammenfassung zur Seite Nr. 19
BIOS Setup Information WBX-6200F-V is equipped with the AMI BIOS stored in Flash ROM. This BIOS has a built-in Setup program that allows users to modify the basic system configuration easily. This type of information is stored in CMOS RAM so that it is retained during power-off periods. When system is turned on, WBX-6200F-V communicates with peripheral devices and checks its hardware resources against the configuration information stored in the CMOS memory. If any error is detected,
Inhaltszusammenfassung zur Seite Nr. 20
In HIFLEX BIOS setup, you can use the keyboard to choose among options or modify the system parameters to match the options with your system. The table below will show you all of keystroke functions in BIOS setup. Keys to navigate within setup menu Key Functions Up Arrow Move to the previous item Down Arrow Move to the next item Left Arrow Move to the item on the left (menu bar) Right Arrow Move to the item on the right (menu bar) Move Enter Move to the item you desired PageUp ke
