Inhaltszusammenfassung zur Seite Nr. 1
VE926
UNDER THE COUNTER 9” TV,
AM/FM RADIO, TELEPHONE &
DVD PLAYER
OWNER’S and INSTALL MANUAL
• Slot-in DVD Player & 9” TFT LCD Monitor
• Multi-function Remote Control
• Built-in Hands Free Speaker Phone
• Cable Ready 125 Channel TV Tuner
• AM/FM Radio
• 2 A/V Inputs
• Intercom Ready
• Internal Stereo Speakers
• Under Cabinet / Table Top Mounting
0
Inhaltszusammenfassung zur Seite Nr. 2
INTRODUCTION WARNING – To prevent fire or shock hazard, do not expose this unit to moisture. CAUTION: TO REDUCE THE RISK OF ELECTRIC CAUTION SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REFER SERVICING TO QUALIFIED SERVICE REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS PERSONNEL. INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL This symbol alerts the user to the fact that expose
Inhaltszusammenfassung zur Seite Nr. 3
INFORMATION Installation of this equipment shall be in strict accordance with the manufacture’s instructions. Failure to follow these instructions may cause or result in the reception of unwanted interference. This unit complies with FCC Rules Part 15, which are designed to provide reasonable protection against interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful int
Inhaltszusammenfassung zur Seite Nr. 4
IMPORTANT SAFETY INFORMATION 1. Read Instructions – All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference. 3. Heed Warnings – All warnings on the product and in the operating instructions should be adhered to. 4. Follow Instructions – All operating and use instructions should be followed. 5. Cleaning – Unplug this product from the wall outlet
Inhaltszusammenfassung zur Seite Nr. 5
13. Power-Cord Protection – Route the power supply cord in a manner that protects it from being stepped on or pinched by items placed on it. Pay particular attention to the power cord’s plug, and the point where the power cord exits from the product. 14. Outdoor Antenna Grounding – If an outside antenna or cable system is being connected to the product, verify that it is properly grounded to insure some type of protection against voltage surges and static build-up. Article 810 of the Na
Inhaltszusammenfassung zur Seite Nr. 6
21. Replacement Parts – When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 22. Safety check – Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 23. Mount
Inhaltszusammenfassung zur Seite Nr. 7
TABLE OF CONTENTS Before You Begin Introduction 1 Important Safety Information 3 Table of Contents 6 Contents of package 7 Installation Under Cabinet Installation 8 Countertop/Desktop Installation 9 Front Panel Controls 10 Rear Panel Controls 11 LCD Control Functions_________________ 12 Battery Installation 13 Remote Control Functions Remote Control Functions 14 Modes of Operation Operation 17 Initial Set up 17 Channel Tuning Set up 17 Positioning the Screen
Inhaltszusammenfassung zur Seite Nr. 8
CONTENTS OF PACKAGE 1. VE926 5. Battery (AAA) 2. Hardware bag 6. FM Dipole Antenna A. 2” Mounting screws (4) 7. Right Angle Coaxial Adaptor B. 2-1/2” Mounting screws (4) 8. FM Antenna Balun C. 3”Mounting screws (4) 9. AM Antenna D. Foot (4) 10. Mounting Hole Template E. Hole cap (4) 11. Owners Installation manual 3. Remote Control 12. Telephone Cord 4. Multi Height Spacer (4) 7
Inhaltszusammenfassung zur Seite Nr. 9
UNDER CABINET INSTALLATION 1) Choose an appropriate mounting location underneath a cabinet or shelf. Close proximity to an electrical outlet, TV antenna or cable connection and telephone jack will facilitate a neat, easy installation. Do not mount the VE926 above a range or oven. Be sure that the location chosen will provide adequate access to the electrical connections on the rear of the unit before continuing. 2) If the location chosen has a bottom edge molding it may be neces
Inhaltszusammenfassung zur Seite Nr. 10
COUNTERTOP/DESKTOP INSTALLATION NOTE: Use caution to avoid damaging the LCD screen and the main unit when converting this unit from an under-counter unit to a countertop unit. Leave the protective plastic on the screen until this procedure is completed. 1) Place the unit (with the screen facing up) on a soft padded surface. 2) Pivot the screen so that it is perpendicular to the front of the unit and then turn it sideways. 3) Remove the hinge guide covers (#1) using a flat bla
Inhaltszusammenfassung zur Seite Nr. 11
FRONT PANEL CONTROLS 1) ON/OFF BUTTON – Power ON/OFF and Standby Condition(Time Display). 2) SET BUTTON – Press this button to set the TIME, ALARM, TV Mode or Speaker Mode. 3) TEL BUTTON – Selects the Hands-free speakerphone function. 4) SOURCE BUTTON – Selects the TV, FM, AM, AV1, AV2 and DVD functional modes. 5) T/F BUTTON – Selects Clock Mode When playing a DVD (MP3, CDDA). 6) CALL BUTTON – Press the CALL button to call another station. 7)
Inhaltszusammenfassung zur Seite Nr. 12
14) VOLUME UP ( ) BUTTON – Press this button to raise the volume. 15) VOLUME DOWN ( ) BUTTON – Press this button to lower the volume. 16) SEEK BUTTONS ( -Right Side) – Press these buttons to go to next available channel with sufficient signal strength. 17) CHANNEL BUTTONS ( -Left Side) – Press these buttons to go to next available channel. 18) DISPLAY WINDOW – Displays the channel/station number, time, and selected source. 19) REMOTE INFRARED SENSORS – These sensors receive inf
Inhaltszusammenfassung zur Seite Nr. 13
LCD Control Functions 1. MENU Button – When pressed, the LCD control MENU is displayed. 2. SEL Button – Used to enter the picture menu. Highlight the menu item to be changed using the UP/DOWN buttons and then press Select to adjust the highlighted item.. 3. UP Button – Scrolls upward through menu items, also adjusts selected item in upward (increase) direction. 4. DOWN Button – Scrolls downward through menu items; also adjusts selected item; in downward (decrease) direction.
Inhaltszusammenfassung zur Seite Nr. 14
9) BATTERY INSTALLATION (Rear View, Battery Size AAA) 13
Inhaltszusammenfassung zur Seite Nr. 15
REMOTE CONTROL FUNCTIONS (1) EJECT (2) DVD (3) TV (4) SETUP (5) SEEK DN, SEEKUP (6) MENU (7) FR( ) (8) STOP( ■) (9) PREV (I ) (10) Digit 0-9 Select (11) TITLE (12) DISPLAY (13) SUB TITLE (14) AUDIO (15) SCREEN (16) ANGLE (AP) (17) ON/OFF (18) A/V (19) AM/FM (20) TEL (21) CH+, CH- (22) ENTER (23) MUTE (24) FF ( ) (25) SF (I ) (26) NEXT ( I) (27) PLAY/PAUSE ( II) (28) VOL +/- (29) SEARCH (30) REPEAT (31) A-B Repeat (32) ZOOM (33) DELETE (34) STEP (ADD
Inhaltszusammenfassung zur Seite Nr. 16
DVD REMOTE FUNCTION (1) EJECT: Press this button to Eject and Load the disc tray. (2) DVD: Press this button to select DVD mode of operation. (4) SETUP: Displays setup menu for initial user settings. (5) SEEK DN/UP (21) CH+/-: For selecting item on menu. (6) MENU: For displaying the menu contained in the disc. (PBC ON/OFF Function - VCD) (7) FR ( ): Fast reverse (2X, 4X, 8X, 20X and play). (8) STOP ( ■): Press this button to stop disc playback (1 time) Stop at the present playing poin
Inhaltszusammenfassung zur Seite Nr. 17
TV REMOTE FUNCTION (3) TV: Press this button to select TV mode of operation. (5) SEEK DN/UP: Use these buttons to advance to the next higher or lower station. (10) 0~9: Use these buttons to make a direct channel selection (15) SCREEN: Press this button to change Display Mode. (16) AP (Auto Program): Press this button for 0.5sec to program and save all the stations on memory. (21) CH+/-: Use these buttons to advance to the next higher or lower channel. (23) MUTE: Press this button to re
Inhaltszusammenfassung zur Seite Nr. 18
OPERATION INITIAL SETUP This unit defaults to cable TV mode. When the unit is first powered on, it will detect the cable system and auto-program the TV tuner to the available stations. Please wait while the unit auto-programs before attempting to operate the unit. During this time the unit will not respond to any commands. The unit will respond normally once the cable mode and channel search mode is concluded. CHANNEL TUNING SETUP If you are Cable TV subscriber, in additio
Inhaltszusammenfassung zur Seite Nr. 19
SETTING and ACTIVATING the ALARM NOTE: The VE926 must be turned “OFF” when performing the following procedure. 1) Press the SET button twice to enter the alarm mode, press the P3 button to toggle between the active and deactivated mode. NOTE: If a series of dashes appear (--: --), the Alarm is DEACTIVATED. 2) Press the CH up/down buttons to set the desired hour/minute. When setting the alarm, check the AM/PM indicator to assure the proper setting. 3) Press the SEEK buttons to toggle be
Inhaltszusammenfassung zur Seite Nr. 20
SETTING THE CABLE TV MODE 1) Press the SET button three times to enter the TV/Cable configuration mode. 2) CABLE or AIR will appear on the display. 3) Press the SEEK button to select Cable mode. 4) Press the CH UP/DOWN button(s) to select the desired cable mode (STD/IRC/HRC). 5) When the desired mode is reached, press the ON/OFF button to confirm. SETTING THE AIR TV MODE 1) Press the SET button three times to enter the TV/Cable configuration mode. 2) Press the SEEK button to sel
