Inhaltszusammenfassung zur Seite Nr. 1
DVD / VIDEO CD / MP3 / CD - PLAYER
DVD105
OPERATION MANUAL
Inhaltszusammenfassung zur Seite Nr. 2
PLEASE READ THE INSTRUCTION CAREFULLY BEFORE OPERATING THIS UNIT. WARNING To prevent fire or shock hazard, do not expose this appliance to rain or moisture. IMPORTANT Since the CD circuitry may cause interference to other radio tuners nearby, switch this unit off when not in use or move it away from the affected radio tuner. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this de
Inhaltszusammenfassung zur Seite Nr. 3
Getting Started Before attempting to connect, operate or adjust this product, please read these instruction completely and keep this manual for future reference. Dear customers : May we take this opportunity to thank you for purchasing this DVD player. We strongly recommend that you carefully study the operating instructions before operating the unit. Main Features • Fully compatible with DVD, Video CD 1.0/1.1/2.0, CD and MP3 • DTS - digital output. • Compatible with full DVD playback functions
Inhaltszusammenfassung zur Seite Nr. 4
Getting Started Disc types Disc size 12cm single side, single layer / single side, double layer Audio & Video PAL and NTSC DVD disc Playback time 135min / 240min max. Disc size 12cm / 8cm Audio & Video VCD disc Playback time 74min/20min max. Disc size 12cm / 8cm CD disc Audio Playback time 74min / 20min max MP3 format disc MP3 Audio * Player is CD-R, CD-RW compatible. Note: CD-R, CD-RW Discs recorded with writing device can only be used when they are correctly treated. Region Management Informat
Inhaltszusammenfassung zur Seite Nr. 5
Safety precautions Warning Attention To avoid electrical shock, do not open the If smoke, malodor or unrelated noise are emit- cabinet, refer servicing to qualified personnel ted from the unit, turn off the power and dis- only. connect the AC power cord. Warning Attention Keep the unit away from flower vases, tubs, sinks, etc. If liquids are spilt into the unit, seri- Touching the unit is dangerous especially if ous damage could occur. during thunder. Warning Attention Do not expose this equipm
Inhaltszusammenfassung zur Seite Nr. 6
Getting Started Accessories AC Line Cord DC Car Adaptor (Cigarette Adaptor) Remote Control AV Cable DC CAR ADAPTOR (Cigarette Adaptor) / CORD The supplied DC car adaptor/cord is designed for use with vehicles equipped with a 12 volt negative ground electrical system only. The equipment is compatible if the negative (-) terminal of the battery is connected to the vehicle’s metal body/chassis. If unsure, contact the vehicles’s dealer. Plug the small end of the car adaptor into the DC 12V jack an
Inhaltszusammenfassung zur Seite Nr. 7
Remote Control Unit 1. GUI Button 2. Numeric Buttons 1 17 3. Shift Button 4. Direction Buttons ( Up / Down/ Left/ Right) 18 5. Chapter Button 6. Play Button 2 19 7. Subtitle Button 8. Fast Backward Button (FR) 3 9. Angle Button 20 10. Audio Button 21 4 11. Program Button 22 5 12. Mute Button 13. Return Button 23 6 14. Slow Button 7 24 25 15. Repeat Button 8 26 16. Fast Button 9 17. Setup Button 27 10 18. Power On/Off 28 19. Zoom Button 29 11 20. Enter Button 21. Root Button 12 30 22. Pause
Inhaltszusammenfassung zur Seite Nr. 8
Getting Started System Connection Warning : Turn off the power and keep AC cord pulled out from the outlet when con- necting the system. AUDIO VIDEO OUT OUT RL VIDEO CORD L R AUDIO S-VIDEO DIGITAL AUDIO DC 12V R L VIDEO OUT LINE OUT S-VIDEO CORD (OPTIONAL) AC OUTLET ADAPTOR ON THE WALL AUDIO CORD (OPTIONAL) COAXIAL AUDIO CABLE (OPTIONAL) TO STEREO TV OR TO COAXIAL DIGITAL OTHER AUDIO AUDIO INPUT EQUIPMENTS CONNECTOR TO AUDIO VIDEO S-VIDEO INPUT CONNECTOR IN (FRONT L/R) AMPLIFIER
Inhaltszusammenfassung zur Seite Nr. 9
Getting Started Front Panel Control (Most of the function can be controlled by remote control unit.) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 1. Push for OPEN / CLOSE 10. Pause Button 2. Phone Jack 11. Skip Forward Button 3. Phone Volume Control 12. Stop Button 4. Power Switch (Standby ON/OFF) 13. DC 12V Input Jack 5. LCD Display 14. S-Video Socket (optional) 6. ON/Standby LED 15. Audio Digital Out Socket 7. Remote Sensor 16. Line Out Jack - Audio R/L 8. Play Button 17. Line Out Jack - Video 9.
Inhaltszusammenfassung zur Seite Nr. 10
Function Button (Remote Control) POWER Button ( ) [18] The POWER button is used to toggle the DVD player standby mode and power on mode. In standby mode, make sure red LED is on; press the POWER button and the player will turn on, and LED will turn off, initialize, and begin to load the disc if there is a disc present. BOOKMARK Button [28] This button is used to store specific portions of the disc in memory and play them immediately whenever you want without the need to search. A-B REPEAT Button
Inhaltszusammenfassung zur Seite Nr. 11
FR Button (Fast Reverse ) [8] This button is used to scan backward through the audio and video at 3-level speeds as X2, X4 and X8. PLAY Button [6] This button is used to play the disc. STOP Button ( ■ ) [25] This button is used to stop the playing of the disc. PREVIOUS Button [34] Press this button to move back to beginning of the previous chapter or track. NEXT Button [32] Press this button to move ahead to the beginning of the next chapter or track. AUDIO Button [10] This button is used to se
Inhaltszusammenfassung zur Seite Nr. 12
DIGEST Button [27] Press this button during VCD 2.0 higher playback, 9 frames will appear on screen, use numeric buttons (0 to 9) or cursor buttons to choose one frame. Then press ENTER to start playing from the selected / // frame. PBC Button [26] This button is used to set PBC function to ON and OFF. When PBC is "OFF", the system will display the menu of VCD. Use Number Buttons ( 0 to 9, +10 ) to make your selection. When PBC is "ON" the system will be in sequential play mode. VOLUME U
Inhaltszusammenfassung zur Seite Nr. 13
4. Press the PLAY button • When playing a DVD, a DVD menu or title menu may appear on the TV. • When playing a VCD/SVCD, a VCD/SVCD menu screen may appear, depending on the VCD/SVCD. • When playing a MP3/CD, a MP3/CD menu screen will appear. 5. Use the cursor buttons to select the desired item • For some discs there is a second menu screen. If so, press the ENTER button to display the next menu screen. • The cursor buttons do not work for VCDs. Use the number button to select the desired item.
Inhaltszusammenfassung zur Seite Nr. 14
- You change the settings of TV TYPE in SCREEN SETUP in the setup display - You change the settings of PARENTAL CONTROL in CUSTOME SETUP in the setup display. • If you do not want to continue playing the disc, to save electricity either, press the POWER button on the player to turn the power off, or press the POWER button on the remote control unit to set the power to the standby mode. PLAYING AT VARIOUS SPEEDS / FRAME BY FRAME Playing the Still Pictures • During playback, press the PAUSE/STEP b
Inhaltszusammenfassung zur Seite Nr. 15
USING THE MENUS Using the Chapter Menu A DVD is divided into long sections of a picture of music piece called Chapters. When you play a DVD that contains several chapters, you can select the title you want using the chapter menu. to use the chapter feature on your DVD player. 1. Press the SHIFT button • The “title menu” appears on the TV screen. The contents of the menu vary from disc to disc. • If the SHIFT button is pressed again, the disc returns to the point at which the title menu was ca
Inhaltszusammenfassung zur Seite Nr. 16
PLAYING VCD WITH PBC FUNCTION (PBC PLAYBACK) When playing VCDs with PBC functions (Ver 2.0 discs), you can enjoy simple interactive operations with search functions. PBC Playback allows you to play VCDs interactively, following the menu screen on the TV screen. 1. Start Playing a VCD with PBC functions, following the Step 1 to 4 in Playing Discs. 2. Select the item number you want on the player • Press the number button of the item you want on the remote control unit. 3. Press the ENTER button
Inhaltszusammenfassung zur Seite Nr. 17
THE ITEMS DISPLAYED DIFFER FROM DISC TO DISC - - / - - - - / - - DVD GUI TITLE Displays the current title. Use the " "/ " " button to move the cursor to the icon. Use the " "/ " " button to select the required title. Press ENTER to confirm the selection. CHAPTER Displays the current chapter. Use the " "/ " " button to move the cursor to the icon. Use the " "/ " " button to select the required chapter. Press ENTER to confirm the selection. TIME Displays the current time. Use
Inhaltszusammenfassung zur Seite Nr. 18
SVCD / VCD GUI TRACK Displays the current track. Use the " "/ " " button to move the cursor to the icon. Use the " "/ " " button or number buttons ( 0 to 9 ) to select the required track. Press ENTER to confirm the selection. TIME Displays the current time. Use the " "/ " " button to move the cursor to the 00:00:00. Input the time using the Number buttons ( 0 to 9 ), and press ENTER to confirm the selection. AUDIO CHANNAL The Audio Channel selection icon. Use the " "/ " " button
Inhaltszusammenfassung zur Seite Nr. 19
SETTINGS AND ADJUSTMENTS This chapter describes how to set and how to adjust using the on-screen SETUP menu. Most setting and adjustments are required to be set when you first use the player. USING THE SETUP DISPLAY Using the setup display, you can do the initial setup, adjust the picture and sound quality, and set the various outputs. You can also set a language for the subtitles and the setup display and limit play back by children. •You can display the setup display only when the player is
Inhaltszusammenfassung zur Seite Nr. 20
SETTING FOR VIDEO Select VIDEO after pressing the SETUP button. • The VIDEO SETUP allows you to set the display according to SYSTEM NTSC the playback conditions. ASPECT 4 : 3 PS LANG OUTPUT S-VIDEO VIDEO System Settings AUDIO The TV system menu allows the user to specify the display CHILD configuration of the TV monitor. Use RETURN and the " "/ " " OTHER buttons to select the appropriate settings. EXIT • NTSC specifies display output in NTSC format. •PAL specifies display output in PA
