Inhaltszusammenfassung zur Seite Nr. 1
DVD PLAYER
PLATINA DVD
XD-DV520
OPERATING INSTRUCTIONS
MANUAL DE INSTRUCCIONES
Owner’s record
For your convenience, record the model number and serial
number (you will find them on the rear of your set) in the
space provided below . Please refer to them when you
contact your Aiwa dealer in case of dif ficulty .
Model No. Serial No. (Lot No.) En (English)
E (Español)
For assistance and information,
call toll free 1-800-BUY-AIWA.
(United States and Puerto Rico)
8C-AVE-903-01
020123AMK-H-O U
Inhaltszusammenfassung zur Seite Nr. 2
ENGLISH 4Ventilation — The unit should be situated with adequate WARNING space around it so that proper heat ventilation is assured. Allow a clearance of 10 cm (4 in.) from the rear and the TO REDUCE THE RISK OF FIRE OR top of the unit, and 5 cm (2 in.) from each side. ELECTRIC SHOCK, DO NOT EXPOSE THIS -Do not place the unit on a bed, rug, or similar surface APPLIANCE TO RAIN OR MOISTURE. that may block the ventilation openings. - Do not install the unit in a bookcase, cabinet, or airtight rack
Inhaltszusammenfassung zur Seite Nr. 3
Random and repeat playback .............................. 30 TABLE OF CONTENTS Random playback ........................................... 30 Repeat playback .............................................. 30 Repeating a portion between two Introduction specified points (A-B Repeat) ................. 31 Programmed playback .......................................... 32 Precautions ...............................................................2 Disabling OSD........................................
Inhaltszusammenfassung zur Seite Nr. 4
BEFORE USE Please read the following before operating the unit. Supported disc formats This unit can play discs with the following marks only . About symbols Although this unit can play DVDs, audio CDs or MP3 discs, DVD some of the functions are restricted dependent on the type (8 cm disc/12 cm disc) of disc. The following symbols are used to make distinction. Playback of MP3 discs is dif ferent from that of other kinds Audio CD of discs. For information about playing back MP3 discs, (8 cm disc/
Inhaltszusammenfassung zur Seite Nr. 5
Region code of the DVD player and DVDs Notes on copyright It is forbidden by law to copy , broadcast, show , broadcast via cable, play in public, or rent copyright material without This DVD player is designed and manufactured for playback permission. of region "1" encoded DVD software. The region code on This product features the copy protection function the labels of some DVD discs indicates which type of player developed by Macrovision. Copy protection signals are can play those discs. This un
Inhaltszusammenfassung zur Seite Nr. 6
BEFORE USE (CONTINUED) Handling discs Storing discs Do not touch the playback side of the disc. After playing, store the disc in its case. Hold the disc by the edges so that fingerprints will not get Do not expose the disc to direct sunlight or sources of heat, on the surface. or leave it in a parked car exposed to direct sunlight, as Do not stick paper or tape on the disc. there may be a considerable temperature increase inside the car . Cleaning discs Handling the unit Fingerprints and dust on
Inhaltszusammenfassung zur Seite Nr. 7
REMOTE CONTROL Before using the remote control CAUTION A battery (CR2025) is already installed in the remote control • Lithium battery (CR2025) for the remote control when shipped from the factory . Replace the battery with Hitachi Maxell or Panasonic, Remove the insulating tape from the battery holder by Part No. CR2025 only . Use of another battery may pulling its end as shown below . present a risk of fire or explosion. The battery may explode if mistreated. Do not recharge, disassemble or di
Inhaltszusammenfassung zur Seite Nr. 8
PARTS AND CONTROLS The instructions in this manual refer mainly to the buttons on the remote control. Buttons on the main unit with the same names as those on the remote control can be used as well. Front panel 12 3 4 56 0 9 8 7 16STANDBY indicator 7a PAUSE button Lights in red when the unit is in standby mode. Press to pause playback. 2POWER button 8s STOP button Press to turn on and of f the unit. Press to stop playing back a disc. 3Disc tray 9c PLAY button Loading and removing discs. Press to
Inhaltszusammenfassung zur Seite Nr. 9
Remote control !MARK button Press to display the mark menu during play . @OK c button 1 •Press to start playback. ! •Press to confirm the selected item in the setup menu. 2 #ON SCREEN button 3 Press to enter and exit from the On Screen Display . @ $j/l buttons 4 • Press l to slow forward a disc. Press j to slow # 5 reverse a disc. $ •Press to navigate through the On Screen Display , or 6 change the value in the setup menu. % 7 %EXIT button 8 ^ Press to exit from menus or On Screen Display . & 9
Inhaltszusammenfassung zur Seite Nr. 10
PARTS AND CONTROLS (CONTINUED) Display window This unit shows On Screen Display messages on the screen of the TV connected to the unit, as well as the display window of the unit. The On Screen Display of each operation makes operation simple and easy , especially when playing DVDs. They appear when you press the ON SCREEN button on the remote control. The instructions in this manual refer mainly to the On Screen Display messages. 12 3 4 PBC AB ANGLE VCD ALL RAND PROG TITLE CHAPTER 8 7 6 5 c indi
Inhaltszusammenfassung zur Seite Nr. 11
CONNECTIONS Before connecting, identify your type of audio equipment or TV referring to the following chart. Then, decide the connection and the setup procedure accordingly . NOTES • The unit cannot be connected to a TV which is not equipped with a video input connector . • Use a commercially available stereo-monaural audio cord when connecting to a monaural TV. Audio system to be connected Input jack of equipment to Connection type be connected to the unit None (only a TV is connected) ––––
Inhaltszusammenfassung zur Seite Nr. 12
CONNECTIONS (CONTINUED) A Connecting to a TV only Rear of the TV to the video input jack (yellow) to the audio input jacks (Left/white, Right/red) yellow Audio/video cord (supplied) white red yellow to AUDIO OUT to VIDEO OUT 1 or 2 jack (yellow) Rear of the unit L (white)/R (red) jacks COMPONENT AUDIO OUT VIDEO OUT S-VIDEO OUT DIGITAL OUT VIDEO OUT Y L 1 CB R 2 CR COAXIAL to an AC outlet Set the setup menu correctly after connecting! Set the "TV Aspect" of the setup menu according to the TV conn
Inhaltszusammenfassung zur Seite Nr. 13
B Connecting to a TV and an amplifier with a Digital In jack Use a commercially available 75 ohm coaxial cord when connecting the unit to an AV amplifier with a Digital In jack. The supplied Audio/video cord is also available instead of a coaxial cord. TV to the video input jack (yellow) yellow Audio/video cord (supplied) yellow to VIDEO OUT 1 or 2 jack (yellow) Rear of the unit COMPONENT AUDIO OUT VIDEO OUT S-VIDEO OUT DIGITAL OUT VIDEO OUT Y L 1 CB R 2 CR COAXIAL to DIGITAL OUT COAXIAL jack to
Inhaltszusammenfassung zur Seite Nr. 14
CONNECTIONS (CONTINUED) C Connecting to a TV and an audio system TV yellow to the video input jack (yellow) Video cord (not supplied) yellow Rear of the unit to VIDEO OUT 1 or 2 jack (yellow) COMPONENT AUDIO OUT VIDEO OUT S-VIDEO OUT DIGITAL OUT VIDEO OUT Y L 1 CB R 2 CR COAXIAL to AUDIO OUT L (white)/ R (red) jacks white red to an AC outlet Audio/video cord (supplied) to audio input jacks (Left/white, Right/red) Audio system Set the setup menu correctly after connecting! Set the "TV Aspect" of
Inhaltszusammenfassung zur Seite Nr. 15
D Connecting to a TV and an AV receiver equipped with a Dolby Digital (AC-3) decoder Use either a commercially available optical cord or a 75 ohm coaxial cord when connecting this unit to an AV receiver with a Digital In jack. The supplied Audio/video cord is also available instead of a coaxial cord. TV to the video input jack (yellow) yellow Audio/video cord (supplied) yellow to VIDEO OUT 1 or 2 jack (yellow) Rear of the unit COMPONENT AUDIO OUT VIDEO OUT S-VIDEO OUT DIGITAL OUT VIDEO OUT Y L 1
Inhaltszusammenfassung zur Seite Nr. 16
CONNECTIONS (CONTINUED) E Connecting to a TV and an AV receiver equipped with a DTS decoder Use a commercially available 75 ohm coaxial cord when connecting the unit to an AV receiver with a Digital In jack. The supplied Audio/video cord is also available instead of a coaxial cord. TV to the video input jack (yellow) yellow Audio/video cord (supplied) yellow to VIDEO OUT 1 or 2 jack (yellow) Rear of the unit COMPONENT AUDIO OUT VIDEO OUT S-VIDEO OUT DIGITAL OUT VIDEO OUT Y L 1 CB R 2 CR COAXIAL
Inhaltszusammenfassung zur Seite Nr. 17
F Connecting to a TV and an AV receiver with the Dolby Pro Logic Surround system TV yellow to the video input jack (yellow) yellow Video cord (not supplied) to VIDEO OUT 1 or 2 jack (yellow) Rear of the unit COMPONENT AUDIO OUT VIDEO OUT S-VIDEO OUT DIGITAL OUT VIDEO OUT Y L 1 CB R 2 CR COAXIAL to AUDIO OUT L (white)/ R (red) jacks white red to an AC outlet Audio/video cord (supplied) Receiver equipped to the audio input jacks with Dolby Pro (Left/white, Right/red) Logic decoder Front speaker (L
Inhaltszusammenfassung zur Seite Nr. 18
CONNECTIONS (CONTINUED) Connecting to a TV equipped with an S-video jack Rear of the TV S-video input connector (S1, S2) S-video cord (not supplied) to S-VIDEO OUT connector Rear of the unit COMPONENT AUDIO OUT VIDEO OUT S-VIDEO OUT DIGITAL OUT VIDEO OUT Y L 1 CB R 2 CR COAXIAL to an AC outlet Set the setup menu correctly after connecting! NOTE Set the "TV Aspect" of the setup menu according to the TV For the best possible picture clarity , it is recommended that connected to the unit as follows
Inhaltszusammenfassung zur Seite Nr. 19
Connecting to a TV or monitor with component video input connectors TV or monitor to video input jacks (Y/C B/CR) Video cables (not supplied) to COMPONENT VIDEO OUT (Y/CB/CR) jacks Rear of the unit COMPONENT AUDIO OUT VIDEO OUT S-VIDEO OUT DIGITAL OUT VIDEO OUT Y L 1 CB R 2 CR COAXIAL to an AC outlet En Set the setup menu correctly after connecting! Component video output jacks (CB/CR/Y) Set the "TV Aspect" of the setup menu according to the TV The component video output jacks output the dif fer
Inhaltszusammenfassung zur Seite Nr. 20
PLAYBACK Getting ready to play •Turn on the TV, and set its video source (V ideo 1, V ideo 2, Video 3, etc.) to the one connected to the unit. •Turn on the audio equipment connected to the unit. Set 6STANDBY 13 2,4rt its input source to the one connected to the unit. indicator Press POWER. 1 The unit turns on and the 6STANDBY indicator turns of f. The " " screen appears on the TV screen. c s a Press zOPEN/CLOSE. 2 The disc tray opens. PBC 1L 2R AB D ANGLE VCD ALL RAND PROG TITLE CHAPTER 1 Numb
