Inhaltszusammenfassung zur Seite Nr. 1
00588A(00)-VR320-1/XAA-eng 3/3/05 7:25 PM Page 1
Instruction Manual
DVD-VR320
www.samsung.com
Inhaltszusammenfassung zur Seite Nr. 2
00588A(00)-VR320-1/XAA-eng 3/3/05 7:25 PM Page 2 Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer- Warning ence in a residential installation. This equipment gener- ates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruc- tions, may cause harmful interference to radio communi- cations. However, there is no guarantee that interfer- ence will not occur in a particular installatio
Inhaltszusammenfassung zur Seite Nr. 3
Getting Started 00588A(00)-VR320-1/XAA-eng 3/3/05 7:25 PM Page 3 • Exterior interference such as lightning and static elec- tricity can affect normal operation of this recorder. If Precaution this occurs, turn the DVD Recorder & VCR off and on again with the POWER button, or disconnect and then reconnect the AC power cord to the AC power outlet. The recorder will operate normally. • Be sure to remove the disc and turn off the recorder after use. • Disconnect the AC power cord from the AC outl
Inhaltszusammenfassung zur Seite Nr. 4
00588A(00)-VR320-1/XAA-eng 3/3/05 7:25 PM Page 4 • Do not apply labels or stickers to discs. (Do not use JPEG CD-R/RW discs fixed with exposed tape adhesive or leftover peeled-off stickers.) • Only JPEG files with the ".jpg", ".JPG" extension can be • Do not use scratch-proof protectors or covers. used. • Do not use discs printed with label printers available • The unit can handle a maximum of 1000 files and folders. on the market. • Maximum size of progressive JPEG is 3M pixels. • Do not loa
Inhaltszusammenfassung zur Seite Nr. 5
Getting Started 00588A(00)-VR320-1/XAA-eng 3/3/05 7:25 PM Page 5 • DVD-RW (VR mode) Do not use the following discs! - This is a format that is used for recording data on a DVD- RAM or DVD-RW disc. You can record multiple titles, • LD, CD-G, CD-I, CD-ROM, DVD-ROM, VCD, DVD+R edit, delete, partial delete, create a playlist, etc. - A disc that is recorded in this mode may not be played and DVD+RW discs should not be used in this product. by existing DVD players. [Note] • DVD-RW (Video mode) Disc
Inhaltszusammenfassung zur Seite Nr. 6
00588A(00)-VR320-1/XAA-eng 3/3/05 7:25 PM Page 6 Step 4 : Connecting the Audio cable . . . . . . . . . . .18 Method 1 : Connecting to your TV . . . . . . . . . . . . . . .18 Contents Method 2 : Connecting to a stereo amplifier with analog input jacks . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Method 3: Connecting to an AV amplifier with a digital input jack . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Step 5 : Connecting external devices . . . . . . . . . . .19 Gett
Inhaltszusammenfassung zur Seite Nr. 7
Getting Started 00588A(00)-VR320-1/XAA-eng 3/3/05 7:25 PM Page 7 Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 Editing Editing Selecting the Subtitle & Audio Language . . . . . . . .41 Changing the Camera Angle . . . . . . . . . . . . . . . . .42 Playing the Title List . . . . . . . . . . . . . . . . . . . . . . . .63 Zooming-In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 Basic Editing (Title List) . . . . . . . . . . . . . . . . . . . . .65 Us
Inhaltszusammenfassung zur Seite Nr. 8
00588A(00)-VR320-1/XAA-eng 3/3/05 7:25 PM Page 8 Before Reading the General Features User’s Manual Make sure to check the following terms before reading The DVD-VR320 allows you to record and play high the user’s manual. quality digital video on DVD-RAM/DVD-RW/DVD-R discs. You can record and edit digital video on Icons that will be used in manual DVD-RAM/ DVD-RW/DVD-R discs as if they were VCR tapes. Icon Term Definition High quality digital audio and video recording and This involves a fun
Inhaltszusammenfassung zur Seite Nr. 9
Getting Started 00588A(00)-VR320-1/XAA-eng 3/3/05 7:25 PM Page 9 Step 3 Recording How to use the DVD There are two different recording methods: Direct Recorder & VCR Recording and Timer Recording. Timer recording is classified as a Date : Once, Daily or Weekly. Recording mode : XP (high quality mode), SP (stan- dard quality mode), LP (long recording mode), and EP (extended mode). Step 1 Select the disc type This unit can record on the following types of discs. If you want to repeatedly record
Inhaltszusammenfassung zur Seite Nr. 10
00588A(00)-VR320-1/XAA-eng 3/3/05 7:25 PM Page 10 Finalizing & Playing on Step 6 other DVD components To play your DVD on other DVD components, finaliz- ing may be necessary. First, finish all editing and recording operations, then finalize the disc. When using a DVD-RW disc in VR Mode Although finalizing is generally unnecessary when playing the disc on a VR Mode compatible compo- nent, a finalized disc should be used for playback. When using a DVD-RW disc in Video Mode The disc should be f
Inhaltszusammenfassung zur Seite Nr. 11
Getting Started 00588A(00)-VR320-1/XAA-eng 3/3/05 7:25 PM Page 11 Description Front Panel 4 1 2 3 5 6 7 8 9 10 11 12 13 14 15 1. DVD DECK 9. DV INPUT JACK 2. DVD OPEN/CLOSE BUTTON 10. FRONT PANEL DISPLAY 3. VCR DECK 11. DVD/VCR SELECT BUTTON 4. VCR EJECT BUTTON 12. RECORD BUTTON 5. POWER BUTTON 13. CHANNEL / BUTTONS 6. P.SCAN BUTTON 14. COPY BUTTON 7. VIDEO INPUT JACK (AV IN 2) 15. PLAY/STILL, REW/SKIP, F.F/SKIP, STOP, 8. AUDIO L, R INPUT JACKS (AV IN 2) BUTTONS Front Panel Display 1 2 3
Inhaltszusammenfassung zur Seite Nr. 12
00588A(00)-VR320-1/XAA-eng 3/3/05 7:25 PM Page 12 Rear Panel 1 2 3 4 5 6 7 8 9 10 11 Fan The fan always revolves when the power is on. Ensure a minimum of 4” clear space on all sides of the fan when installing the product. 1. AUDIO L, R OUT JACKS 6. VIDEO INPUT JACK (AV IN 1) (COMPONENT OUT) 7. AUDIO L, R INPUT JACKS (AV IN 1) 2. DIGITAL AUDIO OUT JACK (OPTICAL) 8. AUDIO L, R OUT JACKS(AV OUT) 3. DIGITAL AUDIO OUT JACK (COAXIAL) 9. VIDEO OUT JACK(AV OUT) 4. VIDEO OUT JACKS (COMPONENT OUT) 1
Inhaltszusammenfassung zur Seite Nr. 13
Getting Started 00588A(00)-VR320-1/XAA-eng 3/3/05 7:25 PM Page 13 12. RETURN Button Tour of the Remote Control Returns to a previous menu. 13. TV/VCR Button 14. INFO Button 1 18 Press this to display current setting or disc status. 2 15. REC Button Press this to make a recording on VCR, DVD-RAM/- RW/-R discs. 16. DVD COPY Button 19 3 Press this when you copy from the VCR 20 4 to the DVD. 21 5 17. REC SPEED Button Use this to set the desired recording time and 6 22 picture quality. 23 18. TV
Inhaltszusammenfassung zur Seite Nr. 14
00588A(00)-VR320-1/XAA-eng 3/3/05 7:25 PM Page 14 Quick Overview Connecting & A Quick overview presented in this guide will give you enough information to start using the recorder. Setting Up Step 1 : Unpacking † Step 2 : Connecting the Antenna Cable † Step 3 : Connecting the Video Cable † Step 4 : Connecting the Audio Cable † Step 5 : Connecting External Devices † Step 6 : Connecting the Power Cord † Step 7 : Preparing the Remote Control Quick Overview . . . . . . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 15
Connections 00588A(00)-VR320-1/XAA-eng 3/3/05 7:25 PM Page 15 Method1 : Antenna + DVD Recorder & VCR + TV : No Cable box Step 1: Unpacking You can record non-scrambled channels by selecting the channel on the DVD Recorder & VCR. Also use this Method if you watch channels without a cable box. Accessories Check for the supplied accessories below. • Video/Audio Cable (AC39-00073A) • RF Cable for TV (AC39-42001J) • Remote Control (AK59-00034H) • Batteries for Remote Control (AAA Size) (AC43-1200
Inhaltszusammenfassung zur Seite Nr. 16
00588A(00)-VR320-1/XAA-eng 3/3/05 7:25 PM Page 16 • Compared to standard interlaced video, progressive Method 3 : Antenna + DVD Recorder & scan doubles the amount of video lines fed to your TV, VCR + Cable box +TV : Cable box with resulting in a more stable, flicker-free, and clear image a few scrambled channels than interlaced video. The progressive scan video out- put jack is used in progressive output mode. This is You can record non-scrambled channels by selecting the only available with
Inhaltszusammenfassung zur Seite Nr. 17
Connections 00588A(00)-VR320-1/XAA-eng 3/3/05 7:25 PM Page 17 Method 2 : Connecting to an S-video input jack Connect an S-video cable(not included) between the S-VIDEO OUT jack on DVD Recorder & VCR and S-VIDEO IN jack on your TV (or AV amplifier). • You will enjoy high quality images. S-Video separates the picture element into black and white (Y) and color (C) signals to present clearer images than regular video input mode. • Connect audio cables(white and red) between the AUDIO L, R OUT
Inhaltszusammenfassung zur Seite Nr. 18
00588A(00)-VR320-1/XAA-eng 3/3/05 7:25 PM Page 18 Method 2 : Connecting to a stereo amplifier with analog input jacks Step 4 : Connecting the If your stereo amplifier only has audio input jacks Audio Cable (L and R), use the analog audio out jacks on the DVD Recorder & VCR. There are several ways to connect your DVD Recorder & VCR. Select the audio connection that best suits you below. • Method 1 : Connecting to your TV • Method 2 : Connecting to a stereo amplifier (analog audio out) • Metho
Inhaltszusammenfassung zur Seite Nr. 19
Connections 00588A(00)-VR320-1/XAA-eng 3/3/05 7:25 PM Page 19 Method 2 : Connecting a Camcorder to the AV IN 2 jacks Step 5 : Connecting You can use the AV IN 2 jacks on the front panel External Devices of the DVD Recorder & VCR. You can record from con- nected as a camcorder. When an input source is inserted into AV IN 2 while viewing TV, the input will be switched to AV IN 2 auto- This allows you to connect your DVD Recorder & VCR to matically. other external devices and view or record thei
Inhaltszusammenfassung zur Seite Nr. 20
00588A(00)-VR320-1/XAA-eng 3/3/05 7:25 PM Page 20 Step 7 : Preparing the Step 6 : Connecting Remote Control the Power Cord After all connections are complete, plug the power cord Install Batteries in the Remote Control in the wall outlet. • Open the battery cover on the back of the remote control. “Auto” appears in the front panel display. This • Insert two AAA batteries. Make sure that the polarities means that the current time is being set automati- (+ and -) are aligned correctly. cally t
