Inhaltszusammenfassung zur Seite Nr. 1
DISHWASHER
ZSF 4123
ZSF 4123 S
152963 06/1 Instruction Book
UK
Inhaltszusammenfassung zur Seite Nr. 2
Contents Safety instructions 3 Installation instructions 19 Fitting under a counter 19 Disposal 3 Levelling 19 Water supply connections 19 Economical and ecological dishwashing 3 Water outlet hose connection 20 Description of the appliance 4 Electrical connection 20 The control panel 4 Hints for test centres 21 Prior to using for the first time 5 The water softener 5 Filling with dishwasher salt 6 Rinse aid 7 In daily use 8 Loading cutlery and dishes 8 The lower basket 8 The cutlery basket 9 The
Inhaltszusammenfassung zur Seite Nr. 3
Safety instructions It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. This information has been provided in the interest of your safety. You MUST read it carefu
Inhaltszusammenfassung zur Seite Nr. 4
Description of the appliance 1. Upper basket stop 2. Water hardness dial 3. Salt container 4. Detergent dispenser 5. Control panel 6. Rating plate 7. Rinse aid dispenser 8. Filters 9. Lower spray arm 10. Upper spray arm 11. Upper basket 12. Worktop IN154 Description of the appliance Function buttons: in addition to the dishwashing Option button "Care Plus": this appliance is equipped programme selected, the following functions can also be set with a special additional function, which makes it po
Inhaltszusammenfassung zur Seite Nr. 5
Indicator lights: have the following meanings: Phase indicator lights: have the following meanings: Wash: illuminates when the washing and rinsing Salt refilling indicator light: illuminates when the salt phases are running. has run out and needs replenishing. Drying: illuminates when the drying phase is Rinse aid refilling indicator light: illuminates when running. the rinse aid has run out and needs replenishing. End of cycle: illuminates when the washing The salt and rinse aid indicator
Inhaltszusammenfassung zur Seite Nr. 6
b) Setting electronically Filling with dishwasher salt (The dishwasher must be switched off) Only use salt specifically designed for use in The dishwasher is factory set at level 5. dishwashers. All other types of salt not specifically designed for use in 1. Press the On/Off button. The On/Off indicator light a dishwasher, especially table salt, will damage the water illuminates (setting mode). softener. If a programme button indicator light is on, this means that Only fill with salt just bef
Inhaltszusammenfassung zur Seite Nr. 7
If you are using dishwasher detergent that already contains Rinse aid rinse aid, it is necessary to deactivate the rinse aid Rinse aid is automatically added during the last rinse, ensuring dispenser, in order to avoid a double dosage. thorough rinsing, and spot and streak free drying. The dispenser, which is positioned inside the door, holds about Deactivation/activation of the rinse aid 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage
Inhaltszusammenfassung zur Seite Nr. 8
In daily use Check if it’s necessary to refill with dishwasher salt or rinse Loading cutlery and dishes aid Sponges, household cloths and any object that can Load cutlery and dishes into the dishwasher. absorb water may not be washed in the dishwasher. Fill with dishwasher detergent . Before loading the dishes, you should: Select a wash programme suitable for the cutlery and - Remove large left-overs. dishes. - Soften remnants of burnt food in pans Start the wash programme. When
Inhaltszusammenfassung zur Seite Nr. 9
The cutlery basket Adjusting the height of the upper basket Long bladed knives stored in an upright position are a If washing very large plates you can load them in the lower potential hazard. basket after moving the upper basket to the higher position. Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket. Maximum height of the dishes in Take care when loading or unloading sharp items such as upper basket lower basket knives. With upper
Inhaltszusammenfassung zur Seite Nr. 10
Use of detergent Only use detergents specifically designed for use in dishwashers. We recommend the use of Finish detergents. Using no more then the correct amount of detergent contributes to reducing pollution. Please observe the manufacturer’s dosing and storage recommendations as stated on the detergent packaging. Fill with detergent 1. If the lid is closed: press release button (1). The lid springs open. 2. Fill the detergent dispenser (2) with detergent. The marking indicates the dosing
Inhaltszusammenfassung zur Seite Nr. 11
Different kinds of detergent Detergent tablets Use of "3 in 1" combi detergents Detergent tablets of different brands dissolve at different General advice speeds. For this reason some detergent tablets cannot These products are detergents with integrated and combined dissolve and develop their full cleaning power during short detergent/rinse-aid and salt functions. programmes. Therefore please use long programmes when using detergent tablets, to ensure the complete removal of 1. Before using the
Inhaltszusammenfassung zur Seite Nr. 12
Washing programmes Programme Degree of soil Press the Cycle description (3) Consumption values and programme Programme Energy Water type of load button duration consumption consumption (in minutes) (in kWh) (in litres) Hot prewash Main wash up to 70°C Heavy soil. Intensive Intensive 2 warm rinses Crockery, cutlery, pots 70 - 80 1,5 - 1,7 18 - 20 70°C 70° 1 hot rinse and pans Drying Cold prewash Main wash up to 65°C or 50°C Automatic Automatic Normal soil. 1 or 2 cold rinses 80 - 105 0,8 - 1,
Inhaltszusammenfassung zur Seite Nr. 13
Starting a washing programme 1. Check that the baskets have been 6. To interrupt or cancel a washing loaded correctly and that the spray programme in progress Interrupt or cancel a washing programme in progress arms can rotate freely ONLY if it’s absolutely necessary. Attention! Hot steam may escape when the door is opened. Open the door carefully. 2. Turn on the water tap To interrupt a washing programme in progress 3. Close the dishwasher door a) Open the dishwasher door; the programme wil
Inhaltszusammenfassung zur Seite Nr. 14
Maintenance and cleaning Clean the external surfaces of the machine and control panel Attention! with a damp soft cloth. If necessary use only neutral Under no circumstances may the dishwasher be used without detergents. Never use abrasive products, scouring pads or filters. solvent (acetone, trichloroethylene etc....). Incorrect repositioning and fitting of the filters will produce Ensure that the seals around the door, the detergent and rinse poor washing results. aid dispensers are cleaned r
Inhaltszusammenfassung zur Seite Nr. 15
What to do, when... Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions given here, without calling out an engineer. ...a flashing fault code appears The dishwasher will not start or stops during operation. All buttons are inoperative except for the On/Off button and a combination of indicator lights, as indicated in the following chart, are flashing. Open the dishwasher’s door and carry out the following suggested corr
Inhaltszusammenfassung zur Seite Nr. 16
...the wash results are not satisfactory The dishes are not clean The wrong washing programme has been selected. The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. The spray arms do not rotate freely due to wrong arrangement of the load. The filters in the base of the washing compartment are dirty or incorrectly positioned. Too little or no detergent has been used. Where there are limescale deposits on the di
Inhaltszusammenfassung zur Seite Nr. 17
Service and Spare Parts In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Service Force Centre by telephoning: 08705 929929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area. For the address of your local Service Force Centre and further information about Service Force, please visit the website at www.serviceforce.co.uk Before calling out an engineer, please ensure you read t
Inhaltszusammenfassung zur Seite Nr. 18
Guarantee Conditions Standard Guarantee Conditions European Guarantee We, Zanussi-Electrolux, undertake that if within 12 months of If you should move to another country within Europe then your the date of purchase this ZANUSSI-ELECTROLUX appliance guarantee moves with you to your new home subject to the or any part thereof is proved to be defective by reason only of following qualifications: faulty workmanship or materials, we will, at our option repair or The guarantee starts from the date y
Inhaltszusammenfassung zur Seite Nr. 19
450 570-600 Installation instructions Any electrical and/or plumbing work required to install Water supply connections this appliance should be carried out by a qualified This dishwasher must be plumbed into a cold water supply. electrician and/or plumber or competent person. For making the connection itself, the coupling nut fitted to the Remove all packaging before positioning the machine. machine’s supply hose is designed to screw onto either a 3/4" If possible, position the machine next to
Inhaltszusammenfassung zur Seite Nr. 20
Water outlet hose connection Electrical connection The end of the drain hose can be connected in the following This appliance must be earthed. ways: The manufacturer declines any responsibility should this safety measure not be observed. 1. To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink If the plug that is fitted to your appliance is not suitable for the running into the machine. socket, it must be cut off and the appropr
