Inhaltszusammenfassung zur Seite Nr. 1
USER’S MANUAL
Part 2
900 MHz Digital Two-Line
Cordless Speakerphone with
Answering System 9452
with Caller ID/Call Waiting
Please also read
Part 1 — Important
Product Information
AT&T and the globe symbol are registered trademarks of AT&T Corp. licensed to Advanced American Telephones.
Inhaltszusammenfassung zur Seite Nr. 2
© 2000 Advanced American Telephones. All rights reserved. Printed in China. 850004409 Issue 1AT&T 10/00
Inhaltszusammenfassung zur Seite Nr. 3
CONTENTS BEFORE YOU BEGIN . . . . . . . . . . . . . 3 CALLER ID OPERATION . . . . . . . 16 About Caller ID with Call Waiting.. 3 View Call History........................ 16 About the Data Port.......................3 Dial a Number from About the Spare Battery Charger.. 3 Call History.............................. 16 Erase a Call Record ..................... 17 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . 4 Erase All Call Records.................. 17 Before You Install .............
Inhaltszusammenfassung zur Seite Nr. 4
Inhaltszusammenfassung zur Seite Nr. 5
BEFORE YOU BEGIN About Caller ID with Call Waiting This product has a Caller ID with Call Waiting feature that works with service from your local phone service provider. Caller ID with Call Waiting lets you see who’s calling before you answer the phone, even when you’re on another call. You may need to change your phone service to use this feature. Contact your phone service provider if: • You have both Caller ID and Call Waiting, but as separate services (you may need combined service) • You ha
Inhaltszusammenfassung zur Seite Nr. 6
INSTALLATION Before You Install 1 Choose a location for the base near an electrical outlet and a telephone jack. This phone requires a modular telephone jack and a standard electrical outlet (110v AC) not controlled by a wall switch. For optimum performance, install the base on the highest floor of your home. a) Remove battery compartment cover by pressing on the indentation and sliding downward. b) Place the battery pack in the handset. Align the metal contacts on the battery with the conta
Inhaltszusammenfassung zur Seite Nr. 7
INSTALLATION 2 Install the handset battery. To attach To remove 3 Attach the belt clip to the cordless handset (optional). 4 Set the dial mode. The dial mode switch on the side of the base comes set to TONE. If you have touch tone service, the phone will be ready to use when installation is complete. If you have dial pulse (rotary) service, set the switch to PULSE. 5 Select base ringer volume for each line. Set the RINGER switches on the side of the base to HIGH, LOW, or OFF. 5
Inhaltszusammenfassung zur Seite Nr. 8
INSTALLATION Table/Desk Installation 1 Connect the power cord. Use only the power cord supplied with this product. If you need a replacement, call 1 800 222-3111. 2 Charge the handset battery. Place the handset in the base. Charge the battery for at least 16 hours the first time. After the first charge, the battery is typically fully charged overnight. 3 Connect the telephone line cord(s). If you have a two- Standard Modular line jack, use only the electrical telephone 4-wire (RJ-14) line cord.
Inhaltszusammenfassung zur Seite Nr. 9
INSTALLATION 4 Check for dial tone. After the batteries are charged, pick up the handset, pressL, and listen for a dial tone. Then press l. If you don’t hear a dial tone, see “IN CASE OF DIFFICULTY.” Wall Installation 1 Position the wall mount adapter on the base. Wall mount adapter Align tabs on wall mount adapter with holes on bottom of base. Snap wall mount adapter firmly into place. 2 Connect the power cord to the phone. Use only the power cord supplied with this product. If you need a rep
Inhaltszusammenfassung zur Seite Nr. 10
INSTALLATION 4 Mount the base on the wall. a) Align holes on base with mounting studs on wall jack. b) Place power cord c) Pull base down on as shown, guiding mounting studs it through tabs on until it locks into base. place. 4 Plug the power cord into the outlet. 5 Charge the handset battery. Place the handset in the base. Charge the battery for at least 16 hours the first time. After the first charge, the battery is typically fully charged overnight. 6 Check for dial tone. After the batterie
Inhaltszusammenfassung zur Seite Nr. 11
FEATURE SETUP Telephone Feature Setup 1 Make sure the handset is off. 2 Press G. 3 Press - until the feature you want to set is flashing on the screen. (Features are described in the chart below.) 4 Press S. 5 Press - or + until the setting you want flashes. 6 Press S — OR — If necessary, use the keypad to enter numbers (for example, when you program the area code), then press S. Telephone Features Feature: Directions: AREA-HOME Select HOME. The screen displays ENTER AREA CODE. If you live in an
Inhaltszusammenfassung zur Seite Nr. 12
TELEPHONE OPERATION AT THE HANDSET Handset Volume Adjust volume of what you hear through the handset. Make a Call Press L or l and wait for dial tone — OR — Dial the phone number (use + to backspace and End a Call edit), then press a LINE button. Exit programming Answer a Call Cancel a page Press the flashing LINE button. Flash/ Call Waiting Access special Conference telephone company Calls subscriber services. Hold Redial Press to put a call Press to display on hold. To return last number to t
Inhaltszusammenfassung zur Seite Nr. 13
TELEPHONE OPERATION AT THE HANDSET Temporary Tone Dialing If you have dial pulse (rotary) service, you can change from dial pulse to touch tone dialing during a call by pressing *. This is useful if you need to send touch tone signals for access to telephone banking or long-distance services. 1 Dial the number. 2 Press *. Buttons pressed after this send touch tone signals. 3 After you end the call, the phone automatically returns to dial pulse (rotary) service. Conference Calls Three-Way Confere
Inhaltszusammenfassung zur Seite Nr. 14
TELEPHONE OPERATION AT THE HANDSET Switching from Handset to Base Speakerphone 1 At the handset, make or answer a call on Line 1 or Line 2 — OR — Establish a conference call. 2 Press H on the handset. 3 At the base, press the appropriate LINE button — OR — Press c to pick up a conference call. Call Timer While the handset or base is on a call, the screen displays the approximate duration of the call. Headset Jack You can use this telephone hands-free when you install a 2.5 mm headset (AT&T SKU#
Inhaltszusammenfassung zur Seite Nr. 15
TELEPHONE OPERATION AT THE HANDSET Operating Range This cordless telephone operates within the maximum power allowed by the Federal Communications Commission (FCC). Even so, this handset and base can communicate over only a certain distance — which can vary with the locations of the base and handset, the weather, and the construction of your home or office. For best performance, keep the base antenna fully upright. If you receive a call while you are out of range, the handset might not ring — or
Inhaltszusammenfassung zur Seite Nr. 16
TELEPHONE OPERATION AT THE BASE Indicates handset Switching from is charging in base Base Speakerphone to Handset 1 While on a call, press H on the base. 2 Press the appropriate LINE button on the handset. Mute Press to prevent your caller from hearing you (you can hear your caller). Press again to return to the conversation. Conference Calls See “Conference Calls” and “Switching from Handset to Base Speakerphone” in TELEPHONE OPERATION AT THE HANDSET. Answer a Call Press the flashing LINE
Inhaltszusammenfassung zur Seite Nr. 17
TELEPHONE OPERATION AT THE BASE Indicates spare battery is installed Base Ringer Volume Use switches on side of phone to adjust how loudly the phone rings for each line. Set each base ringer to HIGH or LOW, or turn OFF. Hold Press to put a call on hold. To return to the call, press the lit LINE button — OR — Lift the handset of another phone connected to the same line. Page/Intercom Press to ring the handset. Handset presses i to respond, O to cancel. Speakerphone Volume While on a call, adjust
Inhaltszusammenfassung zur Seite Nr. 18
CALLER ID OPERATION Caller’s number Caller’s name Date of call Time of call The handset stores up to 50 Caller Identification records in the call history, with the most recent call record displayed first. View Call History 1 Make sure the handset is off. JOHNSON CHARLIE 2 Press + or -. The screen displays the 1-908-555-0100 number of new, unreviewed and old calls NEW . : PM 11 9 20 3 50 in the call history. L 3 Continue to press + or - to view all call information. Dial a Number from Call Histor
Inhaltszusammenfassung zur Seite Nr. 19
CALLER ID OPERATION Erase a Call Record 1 Make sure the handset is off. 2 Press + or - until the screen displays the call record you want to erase. 3 Press S. 4 Press - until ERASE is flashing, then press S. 5 Press - until YES is flashing, then press S. Erase All Call Records 1 Make sure the handset is off. 2 Press + or - until the screen displays a call record. 3 Press S. 4 Press - until ERASE is flashing, then press S. 5 Press - until ALL is flashing, then press S. The screen displays ERASE A
Inhaltszusammenfassung zur Seite Nr. 20
TELEPHONE DIRECTORY This cordless phone can store 50 telephone numbers, each up to 16 digits long. Store a Directory Name & Number 1 Make sure the handset is off. 2 Press G on the handset. The screen flashes DIRECTORY. 3 Press S. The screen displays ENTER NAME. 4 Use the chart below to enter a name to be stored with the number. Press - to move to the next space; press + to back up for correction. 5 Press S. The screen displays ENTER NUMBER. 6 Enter the telephone number you want to store. (Press
