Inhaltszusammenfassung zur Seite Nr. 1
DISHWASHER
DE 6754
DE 6754 S
152969 92/0 Instruction Book
UK
Inhaltszusammenfassung zur Seite Nr. 2
Contents Safety instructions 3 Installation instructions 19 Fitting under a counter 19 Disposal 3 Levelling 19 Water supply connections 19 Economical and ecological dishwashing 3 Water outlet hose connection 20 Description of the appliance 4 Electrical connection 20 The control panel 4 Hints for test centres 21 Prior to using for the first time 5 Setting the water softener 5 Filling with salt 6 Rinse aid 6 In daily use 8 Loading cutlery and dishes 8 The lower basket 8 The cutlery basket 8 The up
Inhaltszusammenfassung zur Seite Nr. 3
Safety instructions It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. This information has been provided in the interest of your safety. You MUST read it carefu
Inhaltszusammenfassung zur Seite Nr. 4
Description of the appliance 1. Upper basket stop 2. Water hardness switch 3. Salt container 4. Detergent dispenser (type A / type B) 5. Control panel 6. Rating plate 7. Rinse aid dispenser (type A / type B) 8. Filters 9. Lower spray arm 10. Upper spray arm 11. Upper basket 12. Worktop IN148 The control panel Function push buttons: in addition to the dishwashing Phase indicator lights: have the following meanings: programme selected, the following functions can also be set WASH illuminates when
Inhaltszusammenfassung zur Seite Nr. 5
Prior to using for the first time Before using your dishwasher for the first time: b) Setting electronically (The dishwasher must be switched off) 1. Ensure that the electrical and water connections comply with the installation instructions. The dishwasher is factory set at level 3. 2. Remove all packaging from inside the appliance. If it’s necessary to set a new level, proceed as follows. 3. Set the water softener. 1. Press function push buttons 1 and 2 simultaneously. 4. Pour 1 litre of wate
Inhaltszusammenfassung zur Seite Nr. 6
Filling with salt Rinse aid Rinse aid is automatically added during the last rinse, ensuring Only use salt specifically designed for use in thorough rinsing, and spot and streak free drying. dishwashers. The dispenser, which is positioned inside the door, holds about All other types of salt not specifically designed for use in 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing a dishwasher, especially table salt, will damage the water programmes, depending upon the dosage setting
Inhaltszusammenfassung zur Seite Nr. 7
Top up the rinse aid when the rinse aid indicator light on the Filling with rinse aid control panel illuminates. (Rinse aid dispenser type B) It is possible to deactivate the rinse aid indicator light (see 1. Open the container by turning the lid (A) anticlockwise. following instructions). 2. Add the rinse aid until the container is completely full. The maximum level for filling is indicated by "max". To deactivate the rinse aid indicator light proceed as follows: (The dishwasher must be swit
Inhaltszusammenfassung zur Seite Nr. 8
In daily use Check if it’s necessary to refill with special salt or rinse aid Loading cutlery and dishes Load cutlery and dishes into the dishwasher. Sponges, household cloths and any object that can Fill with dishwasher detergent . absorb water may not be washed in the dishwasher. Select a wash programme suitable for the cutlery and Before loading the dishes, you should: dishes. - Remove large left-overs. Start the wash programme. - Soften remnants of burnt food in pans When load
Inhaltszusammenfassung zur Seite Nr. 9
Cutlery should be placed in the removable cutlery basket with Adjusting the height of the upper basket the handles facing downwards. If the handles protrude from If washing very large plates you can load them in the lower the bottom of the basket, obstructing the lower spray arm, load basket after moving the upper basket to the higher position. the cutlery with the handles facing upwards. Mix spoons with other cutlery to prevent them from sticking Maximum height of the dishes in together. uppe
Inhaltszusammenfassung zur Seite Nr. 10
For all programmes with prewash, an additional detergent Use of detergent dose (5/10 g) must be placed into the WRD detergent Only use detergents specifically designed for use in dispenser, located in the dishwashers. centre of the upper basket. Using no more then the correct amount of detergent This detergent will take effect contributes to reducing pollution. during the prewash phase Prior to the start of a wash programme (not for the "Rinse and Hold" programme, that does not require the use
Inhaltszusammenfassung zur Seite Nr. 11
Different kinds of detergent Detergent tablets Use of "3 in 1" combi detergents Detergent tablets of different brands dissolve at different General advice speeds. For this reason some detergent tablets cannot These products are detergents with integrated and combined dissolve and develop their full cleaning power during short detergent/rinse-aid and salt functions. programmes. Therefore please use long programmes when using detergent tablets, to ensure the complete removal of 1. Before using the
Inhaltszusammenfassung zur Seite Nr. 12
Washing programmes Programme Degree of soil Press the Cycle (3) Consumption values and programme description Programme duration Energy Water type of load button (in minutes) consumption consumption (in kWh) (in litres) Hot prewash Heavy soil. 70° Intensive 70° Main wash up to 70°C 85 - 95 1,85 - 1,95 21 - 23 Crockery, cutlery, INTENSIVE 3 hot rinses WRD pots and pans WRD Drying Cold prewash Main wash up to 65°C 65° Normal soil. Normal 65° 1 cold rinse 100 - 110 1,4 - 1,5 19 - 21 NORMAL Crockery
Inhaltszusammenfassung zur Seite Nr. 13
Starting a washing programme From the moment that the washing programme has been 1. Check that the baskets have been set, the delay start will begin with the countdown. loaded correctly and that the spray The countdown will decrease with step of 3 hours. arms can rotate freely During the countdown, the indicator light of the selected programme and the indicator light of the number of hours to the start of the programme will remain illuminated. 2. Turn on the water tap Once the delay start h
Inhaltszusammenfassung zur Seite Nr. 14
Maintenance and cleaning Clean the external surfaces of the machine and control panel Under no circumstances may the dishwasher be used with a damp soft cloth. If necessary use only neutral without filters. detergents. Never use abrasive products, scouring pads or Incorrect repositioning and fitting of the filters will solvent (acetone, trichloroethylene etc....). produce poor washing results. Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly wit
Inhaltszusammenfassung zur Seite Nr. 15
What to do, when... Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions given here, without calling out an engineer. ...a flashing fault code appears The dishwasher will not start or stops during operation. All push buttons are inoperative except for the On/Off push button and a combination of indicator lights, as indicated in the following chart, are flashing. Press the On/Off push button to switch the dishwasher off an
Inhaltszusammenfassung zur Seite Nr. 16
...the wash results are not satisfactory The dishes are not clean The wrong washing programme has been selected. The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. The spray arms do not rotate freely due to wrong arrangement of the load. The filters in the base of the washing compartment are dirty or incorrectly positioned. Too little or no detergent has been used. Where there are limescales deposits on the d
Inhaltszusammenfassung zur Seite Nr. 17
Service and Spare Parts In the event of your appliance requiring service, or if you wish Customer Care to purchase spare parts please contact your local Service Force Centre by telephoning: Department 08705 929929 For general enquiries concerning your Zanussi Electrolux Your telephone call will be automatically routed to the Service appliance or for further information on Zanussi Electrolux Force Centre covering your post code area. products please contact our Customer Care Department by letter
Inhaltszusammenfassung zur Seite Nr. 18
Guarantee Conditions Standard Guarantee Conditions European Guarantee We, Zanussi Electrolux, undertake that if within 12 months of If you should move to another country within Europe then your the date of purchase this ZANUSSI ELECTROLUX appliance guarantee moves with you to your new home subject to the or any part thereof is proved to be defective by reason only of following qualifications: faulty workmanship or materials, we will, at our option repair or The guarantee starts from the date y
Inhaltszusammenfassung zur Seite Nr. 19
570 - 600 600 Installation instructions Any electrical and/or plumbing work required to install Water supply connections this appliance should be carried out by a qualified This dishwasher must be plumbed into a cold water supply. electrician and/or plumber or competent person. For making the connection itself, the coupling nut fitted to the Remove all packaging before positioning the machine. machine’s supply hose is designed to screw onto either a 3/4" If possible, position the machine next t
Inhaltszusammenfassung zur Seite Nr. 20
Water outlet hose connection Electrical connection The end of the drain hose can be connected in the following This appliance must be earthed. ways: The manufacturer declines any responsibility should this safety measure not be observed. 1. To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink If the plug that is fitted to your appliance is not suitable for the running into the machine. socket, it must be cut off and the appropr