Inhaltszusammenfassung zur Seite Nr. 1
RE VIEW COPY
ATCA-C110/1G
AMC Carrier Blade
Installation and Use
225254 420 000 AA
September 2005 Edition
Inhaltszusammenfassung zur Seite Nr. 2
RE VIEW COPY © Copyright 2005 Motorola, Inc. All rights reserved. Printed in the United States of America. Trademarks Motorola and the stylized M logo are trademarks registered in the U.S. Patent and Trademark Office. PICMG, AdvancedTCA, and the AdvancedTCA logo are registered trademarks of PCI Industrial Computer Manufacturers Group. PowerPC™ and the PowerPC logo are trademarks of International Business Machines Corporation. All other product or service names mentioned in this document are the
Inhaltszusammenfassung zur Seite Nr. 3
RE VIEW COPY Safety Summary The following general safety precautions must be observed during all phases of operation, service, and repair of this equipment. Failure to comply with these precautions or with specific warnings elsewhere in this manual could result in personal injury or damage to the equipment. The safety precautions listed below represent warnings of certain dangers of which Motorola is aware. You, as the user of the product, should follow these warnings and all other safety precau
Inhaltszusammenfassung zur Seite Nr. 4
RE VIEW COPY Flammability All Motorola PWBs (printed wiring boards) are manufactured with a flammability rating of 94V-0 by UL- recognized manufacturers. EMI Caution Caution This equipment generates, uses and can radiate electromagnetic energy. It may cause or be susceptible to electromagnetic interference (EMI) if not installed and used with ! adequate EMI protection. Caution Lithium Battery Caution This product contains a lithium battery to power the clock and calendar circuitry. Caution Dan
Inhaltszusammenfassung zur Seite Nr. 5
RE VIEW COPY Motorola products with the CE marking comply with the EMC Directive (89/336/EEC). Compliance with this directive implies conformity to the following European Norms: EN55022 “Limits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment”; this product tested to Equipment Class A EN50082-1:1997 “Electromagnetic Compatibility—Generic Immunity Standard, Part 1. Residential, Commercial and Light Industry” System products also fulfill EN609
Inhaltszusammenfassung zur Seite Nr. 6
RE VIEW COPY Notice While reasonable efforts have been made to assure the accuracy of this document, Motorola, Inc. assumes no liability resulting from any omissions in this document, or from the use of the information obtained therein. Motorola reserves the right to revise this document and to make changes from time to time in the content hereof without obligation of Motorola to notify any person of such revision or changes. Electronic versions of this material may be read online, downloaded
Inhaltszusammenfassung zur Seite Nr. 7
RE VIEW COPY Contents About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvii Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xvii Summary of Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xvii Ordering Information . . . .
Inhaltszusammenfassung zur Seite Nr. 8
RE VIEW COPY Contents Control Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Injector/Ejector Lever and Hot Swap Switch Mechanism . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Verify Slot Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Installing the ATCA-C110/1G in a Powered Chassis . . . . . . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 9
RE VIEW COPY Contents Boot Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 System Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 IPMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 IPMB Interfaces . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 10
RE VIEW COPY Contents Zone 3 Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 6 Memory Map and Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Memory Maps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Interrupt Mapping . . . . . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 11
RE VIEW COPY Contents Manufacturers’ Documents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Related Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 ATCA-C110/1G Installation and Use Manual xi
Inhaltszusammenfassung zur Seite Nr. 12
RE VIEW COPY
Inhaltszusammenfassung zur Seite Nr. 13
RE VIEW COPY List of Figures Figure 1-1. Board Layout Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Figure 1-2. Bay Locations on ATCA-C110/1G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Figure 1-3. Fabric Interface Module Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Figure 1-4. SO-DIMM with Notch . . . . . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 14
RE VIEW COPY
Inhaltszusammenfassung zur Seite Nr. 15
RE VIEW COPY List of Tables Table 1. Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xviii Table 2. Accessories Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xviii Table 1-1. Startup Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Table 1-2. Default Switch Settings for SW1 . . . . .
Inhaltszusammenfassung zur Seite Nr. 16
RE VIEW COPY List of Tables Table 6-8. I2C to GPIO’s Device Mappings - ATMega64-AMC Private I2C Bus . . . . . . . . . . . . . . . . 80 Table 6-9. Geographical addressing of AMC Bays on ATCA-C110/1G . . . . . . . . . . . . . . . . . . . . . . 82 Table 6-10. Ethernet Phy Address Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Table B-1. ATCA-C110/1G Environmental Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 17
RE VIEW COPY About This Manual This manual provides both general and functional descriptions of the product along with installation and removal instructions, firmware details, connector pin assignments, memory maps, troubleshooting information, specifications, thermal validation and related documentation details for the ATCA-C110/1G board. The ATCA-C110/1G is a multi-function conventional AMC Carrier intended to be used in control and management applications on AdvancedTCA™ systems. The boa
Inhaltszusammenfassung zur Seite Nr. 18
RE VIEW COPY About This Manual Order Numbers The table below is an excerpt from the blade’s ordering information. Ask your local Motorola representative for the current ordering information. Table 1. Ordering Information Order Number Variant Name Description 121871 ATCA-C110/1G-1GB-833 AMC carrier board along with 1G FIM The table below is an excerpt from the blade’s accessories ordering information. Ask your local Motorola representative for the current ordering information. Table 2. Accessor
Inhaltszusammenfassung zur Seite Nr. 19
RE VIEW COPY About This Manual Appendix C, Thermal Validation, provides information about thermally significant components and an overview of how to measure various junction and case temperatures. Appendix D, Related Documentation, lists other Motorola Computer Group documents, industry specifications, and additional sources of related information. Comments and Suggestions Motorola welcomes and appreciates your comments on its documentation. We want to know what you think about our manuals a
Inhaltszusammenfassung zur Seite Nr. 20
RE VIEW COPY About This Manual Miscellaneous notations The term AMC Carrier refers to the ATCA-C110/1G board/blade, and is used interchangeably. The phrases Service Processor and MPC8540 are used interchangeably. The term xY in reference to a serial link refers to a link with a width of Y Lanes. For example, an x4 PCI-Express link refers to that the PCI-Express link with a width of 4 lanes. The term Yx indicates plurality in general. For example, a 2x SerDes interface refers to two SerDes int
