Inhaltszusammenfassung zur Seite Nr. 1
.
Please read and save these instructions.
NewAir ADW-2600W
Portable Dishwasher
Instruction Manual
Inhaltszusammenfassung zur Seite Nr. 2
Read This Manual Dear Customer, This instruction manual will provide you with valuable information necessary for the proper care and maintenance of your new appliance. Please take a few moments to carefully read this manual, as it contains safety, operating and installation instructions, as well as troubleshooting tips. We also recommend retaining it for future reference and giving it to any subsequent owners of this appliance. Before Calling for Service Occasionally a minor
Inhaltszusammenfassung zur Seite Nr. 3
1. IMPORTANT SAFETY INFORMATION: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE WARNING! Follow the precautions below when using your dishwasher. GROUNDING INSTRUCTIONS • This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance to the electric current. This appliance is also equipped with a power cord with an equipment grounding conductor and a grounding plug. • The p
Inhaltszusammenfassung zur Seite Nr. 4
2. OPERATING INSTRUCTIONS IMPORTANT: To ensure optimal performance, please read all operating instructions carefully before using this appliance for the first time. Control Panel 4 6 Dishwasher Features Dishwasher Features START PROG. ON/OFF RESET 6 7 2 5 1 3 1. Rinse Aid Warning Indicator Light: Turns on when the rinse aid dispenser needs to be refilled. 2. Start/Reset Button: Press this button to start or pause the dishwasher. The corresponding indicator light w
Inhaltszusammenfassung zur Seite Nr. 5
3. BEFORE USING FOR THE FIRST TIME A. Filling the Rinse Aid Dispenser Rinse Aid Dispenser Rinse aid is released during the final rinse to prevent water from forming droplets on your dishes, which can leave spots and streaks. Using rinse aid also improves drying by allowing water to sheet off dishes. Your dishwasher is designed to use liquid rinse aids. The rinse aid dispenser is located inside the door next to the detergent dispenser. To fill the rinse aid dispenser, open the cap
Inhaltszusammenfassung zur Seite Nr. 6
MAX MAX Adjusting the Rinse Aid Dispenser Adjust lever Adjust lever The rinse aid dispenser has 4 settings. The recommended (Rinse) (Rinse) setting is “3”. If dishes are still not drying properly or are spotted, adjust the dial to the next higher number, “4”. NOTE: Increase the amount of rinse aid if there are still water droplets on your dishes. Reduce the amount of rinse aid if there are white stains on your dishes or if there is a bluish film on glassware or cutlery. B. Us
Inhaltszusammenfassung zur Seite Nr. 7
Detergent Dispenser The detergent dispenser must be refilled prior to the start of each wash cycle. This dishwasher uses less detergent and rinse aid than a conventional dishwasher. Generally, only one tablespoon of detergent will be required for a normal wash load. For more heavily soiled dishes, use more detergent. Always add the detergent just before starting the dishwasher, otherwise it will not dissolve properly. Proper Amount of Detergent Detergent powder 1 1 2 2 Deterge
Inhaltszusammenfassung zur Seite Nr. 8
4. LOADING THE DISHWASHER BASKET Recommendations • Use utensils that are dishwasher safe. • Use a mild detergent that is “kind to dishes.” Seek further information from the detergent manufacturer if necessary. • For delicate items, use a washing program with a low temperature. • To prevent damage, do not remove glass or cutlery from the dishwasher immediately after the wash cycle has ended. Washing Guidelines The following is a list of items that are not suitable and somewhat sui
Inhaltszusammenfassung zur Seite Nr. 9
• Dishes and cutlery should lie inside one another or cover each other. • Glasses should not touch, as this can cause damage. • Load large, difficult to clean items into the basket. • Knives with long blades should not be stored in an upright position. • Long and/or sharp items and cutlery should be positioned horizontally in the basket. • Do not overload the dishwasher. This is important for optimal results and for energy conservation. Loading the Basket Position dishes and cutle
Inhaltszusammenfassung zur Seite Nr. 10
The Cutlery Basket Cutlery should be placed in the cutlery basket with the handles at the bottom. If the rack has side baskets, spoons should be loaded individually into the appropriate slots. Especially long utensils should be placed in the horizontal position at the front of the upper basket as shown. 4 44 1 3 2 5 444 1 Dinner Forks 3 2 IN 2 Salad Forks 4 1 3 Knives 3 2 41 4 Teaspoons 5 Serving Spoons 1 4 2 3 6 Serving Forks 1 4 623 4 4 23 5 4 14 WARNING! • Do
Inhaltszusammenfassung zur Seite Nr. 11
5. Starting a Wash Cycle Wash Cycle Table Note: • Indicates that you will need to fill rinse aid dispenser • *AHAM DW-1-2005: This program is the test cycle; the recommended rinse aid dispenser setting is 6. Program Cycle Description of Cycle Deterge Run Energy Water Rinse Selection (Kwh) (Liters) Aid nt Time Information Pre/Mai (Minutes) n Heavy For extremely Pre-wash soiled loads Pre-wash122º F(50º C) including Pre-Wash 122º F (50º C) pots, pans Wash140º F (60º
Inhaltszusammenfassung zur Seite Nr. 12
Changing Wash Cycles If the dishwasher has only been running for a short period of time, you can change the wash cycle. However, if the machine has run long enough that the detergent has already been released, it is also possible that the wash water has already been drained. In this case, you will need to refill the detergent dispenser and then choose the appropriate cycle. See section “Using Detergent.” Press the Start/Reset button and hold for three seconds. This will put the dis
Inhaltszusammenfassung zur Seite Nr. 13
6. MAINTENANCE AND CLEANING Filtering System The filter is designed to prevent stray pieces of food and small objects from getting inside the pump. 1. Main Filter Food and soil particles trapped by the main filter are pulverized by a special jet on the spray arm and washed down the drain. 3 2. Fine Filter The fine filter holds soil and food residue in the sump area 2 to prevent it from being redeposited on dishes during the wash cycle. 3. Coarse Filter 1 The coarse filter traps
Inhaltszusammenfassung zur Seite Nr. 14
Remember: • Inspect all filters before every cycle to ensure there are no food particles. • By unscrewing the coarse filter, the entire filter assembly can be removed. Always remove food remnants and clean the filters by placing them under running water. NOTE: The entire filter assembly should be cleaned once a week. Cleaning the Filter Use a cleaning brush to clean both the coarse filter and the fine filter. Reassemble all filter parts as shown in the diagram and re-insert entire f
Inhaltszusammenfassung zur Seite Nr. 15
Cleaning the Spray Arms You can easily remove the spray arms to for periodically cleaning the nozzles. This will prevent possible clogging. To remove a spray arm, simply grasp in the middle and pull upwards. Wash nozzles by placing under a stream of running water. Carefully replace them, making sure that they can rotate freely. Keep Your Dishwasher Running Smoothly • After Every Wash After every wash, turn off the water supply and leave the door slightly open to ensure that an
Inhaltszusammenfassung zur Seite Nr. 16
POSITIONING THE APPLIANCE Place your dishwasher in the desired location, ensuring that there is a wall for the back to rest against. Your dishwasher is equipped with water supply and drain hoses that can be positioned on either the right or left in order to meet varying installation needs. POWER CONNECTION WARNING! To ensure your safety: • NEVER USE AN EXTENSION CORD OR ADAPTER PLUG WITH THIS DISHWASHER. • DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE GROUNDING PRONG FROM THE P
Inhaltszusammenfassung zur Seite Nr. 17
WATER CONNECTION Back View Back of Dishwasher: 1. Drain port 2. Power Cord 3. Inlet port Your dishwasher comes equipped with a “quick connect” assembly that includes the inlet and drain hose. However, the faucet adapter must be installed on your faucet before you can connect the dishwasher. The adapter is compatible with faucets that have either inside (female) or outside (male) threaded connections. Quick Connect Assembly Drain Hose: 1. Drain port connect
Inhaltszusammenfassung zur Seite Nr. 18
1. Screw the faucet adapter onto/into your faucet. Check to make sure there are no leaks. You can use Teflon tape to temporarily eliminate leaks if necessary. 2. Connect the six-sided connection of the drain hose to the drain port on the back of your dishwasher. Make sure not to damage the threads by over-tightening. 3. Connect the star shaped connection of the inlet hose to the inlet port on the back of the dishwasher. Make sure not to damage the threads by over tightening. 4. Connect
Inhaltszusammenfassung zur Seite Nr. 19
8. TROUBLESHOOTING TIPS Before Calling for Service Please refer to these troubleshooting tips for possible solutions to minor problems. If the problem persists, please contact an authorized service department or customer service. Problem Possible Causes What to Do Dishwasher will A fuse may be blown Replace the fuse or reset your circuit breaker. not start. or the circuit breaker Turn off other appliances that may be sharing the may have tripped. same circuit. The power supply M
Inhaltszusammenfassung zur Seite Nr. 20
basket. Rattling nose in An item is not Pause the wash cycle and rearrange the dishes. interior securely placed in the basket. Noise in the Potentially an Will not harm your dishwasher’s performance. water pipes installation problem Contact your plumber. or loose connections at cross-sections in the piping Dishes aren’t Dishes were See “Loading the Dishwasher.” clean improperly loaded The wash cycle Select a stronger wash cycle, see “Wash Cycle selected was not Table.” strong enoug
