Bedienungsanleitung Precisionaire Rigid Air MERV 10-14

Inhaltszusammenfassung zur Seite Nr. 1

Rigid-Air
Spun Glass or Synthetic Media Rigid Filter
Bulletin PB1001-1106
General
The headered version should be selected for use
Rigid-Air extended media surface rigid filters are
with the hardware listed. If the filter is to be installed
designed for use in most commercial or industrial
so that it protrudes upstream of the holding frame,
HVAC systems where medium to high efficiency
the box style filter is required.
filtration is required.
Physical Data
They feature your selection of media back

Inhaltszusammenfassung zur Seite Nr. 2

Notes: 1. PD represents clean pressure drop in inches w.g. Recommended final pressure drop for all models is 1.5" w.g. 2. Efficiency is average and is based on ASHRAE Standard 52.1 and 52.2 test methods. 3. Performance tolerances conform to Section 7.4 of ARI Standard 850. 4. Actual filter face size is 5/8" under on height and width. Actual filter depth is 5-7/8" or 11-1/2" 5. Pressure drop values shown are for synthetic media. Glass media approximately 20% greater. 6. Perfmormance values shown

Inhaltszusammenfassung zur Seite Nr. 3

Corrosion Resistant Steel Frame Double Turned flange for a stronger frame. • 5-7/8" or 11-1/2" depths Choice of media • Available with or Lofted fiberglass or without header micro-fine synthetic • Class 1 available with glass media and metal fingers. Diagonal support prevent racking. Robust Media Support Expanded metal pleat backng and choice of metal or plastic pleat supports. Rigid-Air Box Type Filter Rigid-Air Filter with Header and With Metal Pleat Separators Plastic Pleat Separators Flande

Inhaltszusammenfassung zur Seite Nr. 4

Application Guidelines Hospital Applications Rigid-Air filters may be used wherever job Rigid-Air filters may be used on the downstream requirements and available space will side of the supply fan in hospitals if they are far accommodate 6" or 12" deep filters. Rigid-Air filters enough from the fan so that the high fan discharge should be selected using 24" x 24" and 24" x 12" velocity will not affect them. Rigid-Air rigid filters can face sizes. This allows for 12" increments in height withstan