Bedienungsanleitung SkyLink 18KR

Inhaltszusammenfassung zur Seite Nr. 1

®
Skylink Wireless Keyless Entry
for Garage Doors
Model 18KR
1. INTRODUCTION
2. INSTALLATION (CONT)
Plug in the connector end of the Red/Black wire to the 18R
In this package, you will find a keyless entry transmitter with 3V lithium
2
batteries, a garage door receiver, a red / black wire and screws. receiver. Note the orientation of the male & female connector.
1 pc 2.6 x 6 screw (included)
1 pc 2.6 x 12 screw (included)
1 pc 2.6 x 25 screw (included)
Garage Door
Red/Black Wire
Receiver
K

Inhaltszusammenfassung zur Seite Nr. 2

10. ADDITIONAL RECEIVER 4. PROGRAM A KEYPAD TO THE RECEIVER (CONT) You can use 18K to control up to 4 garage door openers by adding Press the [4-digit PIN], [#] and [the assigned 3 ® Skylink Garage Door Receiver 18R for each opener. number of the door] within 5 seconds. The assigned door number can be either 1, 2, 3 or 4. Example: [0][0][0][0][#][3], for door 3. 11. CAUTION 4 The receiver red LED will go off indicates the RISK OF ELECTRICAL SHOCK. FOR INDOOR USE ONLY. programming is completed.