Bedienungsanleitung Gianni Industries VDH-100

Inhaltszusammenfassung zur Seite Nr. 1

VDH-100
Full Color Villa Video Door Phone
Four wires villa system indoor monitor
6" LCD full color screen
Indication lighting
2-way communication
Chroma/Contrast
Crystal clear speaker system
Volume
Clear and bright pictures
Brightness
Quick and easy connection
TFT screen
Speaker
Extension call transferring
Door releasing
Hands-free talking
Microphone
Four wires video system with integral
keypad access
CCD camera
Water cover
Illumination light
Metal external housing
Auto keypad illumination in da

Inhaltszusammenfassung zur Seite Nr. 2

VDH-100 Full Color Villa Video Door Phone Operation instruction Extension call transferring Conversation Host monitor Lisa Come Down! Is John at home? Hang out together Ok,holdon! Hold on! 123 123 456 456 789 789 0 0 Auxiliary monitor Hi, Allen! 1. Visitor presses the call button. 1. Visitor presses the call button. 2. Press button to reply. (Hands-free talking) 2. Press button to reply. (Hands-free talking) Other monitors should be cut off at the same time. 3. Press the button to transfer the a

Inhaltszusammenfassung zur Seite Nr. 3

VDH-100 Full Color Villa Video Door Phone Dimension System wire diagram The next Indoor monitor Power Supply 12 VDC Red Black Indoor monitor Video(purple) Audio(white) GND(black) Power+(red) Power+(red) GND(black) Unit: mm Audio(white) Video(purple) Lock device (Fail-safe) Com. 1 2 3 Power Supply 4 5 6 12 VDC 7 8 9 N. C. 0 Outdoor station Indoor monitor Power+(red) GND(black) Audio(white) Audio Socket Video Video(purple) EGR Push button 0V TM CLK N. O. Power Supply Com. 12 VDC N. C. 150 cm (Fail

Inhaltszusammenfassung zur Seite Nr. 4

VDH-100 Full Color Villa Video Door Phone Operation Instruction The Master Code is set to 1234 as factory default. Setting the relocking timer Enter Programming Mode Factory default set is 0.5 second. Compose twice the master code (Factory master is「」 1234 ) Enter the Programming mode→「 Enter＊99」→ →→ an audible and the LED will flash red you are now in the Enter the desired lock / relay operation time in a "programming mode". two digit format (01~99 seconds)→「 Press #」 to exit from the programmi