Bedienungsanleitung Gianni Industries GEM EM-400x

Inhaltszusammenfassung zur Seite Nr. 1

70
1
2 3
4 5 6
8 9
7
0 #
*
DG-600E
Stand-alone Proximity Reader
Unit: mm
Specifications
Features
Operating Voltage: DC +9V to 16V
Allows up to 600 proximity cards and PIN codes
Current Draw: Average 50mA, Peak 100mA @ 12Vdc
125 KHz Frequency EM-400x compatible chip Transmitting Frequency: 125 KHz, EM-400x compatible chip
Memory Volume: 600 Proximity cards/tokens and PIN codes
Tamper switch and alarm buzzer included
Read Range: Up to 10 cm (Depending on local installation
Fully Programmable via k

Inhaltszusammenfassung zur Seite Nr. 2

DG-600E Stand-alone Proximity Reader Auxiliary reader The auxiliary reader must not be further than 50 meters from the DG-600E. Also this reader should be nearer than 60 centimeters, to avoid disturbance. The suggested wire gauge is #22~26 AWG. Split of units for DG-600E and auxiliary reader in ranging up to 50 M bring out the friendly system device for low cost but high security with anti-tampering as well as convenience and reliability. GEMPROX-E 125 KHz, Wiegand 26-bit hexadecimal format outp