Inhaltszusammenfassung zur Seite Nr. 1
- User Guide
VFM735w-51P
Digital Photo Frame
-
Model No.: VS12403
Inhaltszusammenfassung zur Seite Nr. 2
English Compliance Information Following information is only for EU-member states: The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE). The mark indicates the requirement NOT to dispose the equipment as unsorted municipal waste, but use the return and collection systems according to local law. ViewSonic i VFM735w
Inhaltszusammenfassung zur Seite Nr. 3
Important Safety Instructions 1. Do not use the equipment near water. 2. Wipe the machine with a soft and dry cloth. 3. Do not block any vent holes. Please install the product in accordance with the manufacturer’s instructions. 4. Do not use the product on your legs for a long time because it gets hot and you may be burned. 5. Please avoid installing the product in a place where the temperature is above 40°C or lower than -10°C, or in a place that is moist or wet. 6. Protect the power cord pl
Inhaltszusammenfassung zur Seite Nr. 4
English Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Substance Proposed Maximum Concentration Actual Concentration Lead
Inhaltszusammenfassung zur Seite Nr. 5
Copyright Information © Copyright ViewSonic Corporation, 2008. All rights reserved. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. without notice. Information in this document may
Inhaltszusammenfassung zur Seite Nr. 6
English TABLE OF CONTENTS Introduction.............................................................................................................................................................1 Important Safety Precautions................................................................................................................................2 Main Features ..................................................................................................................................
Inhaltszusammenfassung zur Seite Nr. 7
Managing Files......................................................................................................................................................16 ........................................................................................................................................................17 ......................................................................................................................................................17 Changing Frame Settin
Inhaltszusammenfassung zur Seite Nr. 8
Introduction Thank you for purchasing this Digital Photo Frame. This Digital Photo Frame is compatible with SD, MMC, MS and CF memory card formats, which enables you to view digital photo directly from your camera’s memory card. This manual contains important safety information and operation instructions, so please read all the instructions carefully before using the Digital Photo Frame and keeps it for future reference. We have done our best to produce a complete and accurate manual; howe
Inhaltszusammenfassung zur Seite Nr. 9
Important Safety Precautions Always follow these basic safety precautions when using your Digital Photo Frame. This will reduce the risk of fire, electric shock, product damage and personal injury. Warning: Do not remove the cover or back to reduce the risk of electric shock. There are no user-serviceable parts inside. Refer servicing to qualified personnel. Warning: Do not expose the Digital Photo Frame to rain or moisture to prevent fire or electric shock hazard. Do not expose
Inhaltszusammenfassung zur Seite Nr. 10
Cleaning Before cleaning the Digital Photo Frame make sure it is turned off. Never spray or pour liquid directly onto the screen or plastic casing. To clean the LCD screen, wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. If it is still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner on a clean, soft, lint-free cloth to clean the screen. To clean the plastic casing, use a soft, dry cloth. If it is still not
Inhaltszusammenfassung zur Seite Nr. 11
Main Features 7 inch Digital TFT LCD: 800*480 15:9 Decorative appearance, good quality Displays digital pictures (JPEG) without a computer Automatic slide show with background music and multiple transition effects Supports MP3 audio formats Supports MPEG-1, MPEG-4 and M-JPEG video formats Calendar display Alarm setting Auto power On/Off Support earphone connection Compatible with SD/MMC/MS, and CF memory cards USB Host for connecting to the USB mass storage
Inhaltszusammenfassung zur Seite Nr. 12
Overview Front View Back and Side View 1. [ ] Play/Pause; Confirm touch key 5. [ ]Right/Rotate/Adjust volume 10. USB HOST 2. [M] Menu touch key; touch and hold to touch key 11. Headphones connection open OSD menu 6. [ ] Up/Previous touch key 12. Mini-USB connection 3. [ ] Exit touch key 7. [ ] Down/Next touch key 13. 9V DC Input socket 4. [ ] Left/Rotate/Adjust Volume touch 8. SD/MMC/MS-card slot 14. Adjustable mounting key 9. CF-card slot 15. On/Off switch ViewSonic 5 VFM735w
Inhaltszusammenfassung zur Seite Nr. 13
Getting Started Attaching the mount 1. Place the frame on a flat surface with its back facing you. 2. Place the mount carefully in the slot on the back of the frame. 3. Turn the mount counter-clockwise by 45°until it locks. It will now be possible to set the device in the landscape orientation. 4. Turn the mount counter-clockwise by 90° until it locks. It will now be possible to set the device in the portrait orientation 5. After the mount has been attached, you can adjust the height of
Inhaltszusammenfassung zur Seite Nr. 14
Connecting to the power 1. Plug one end of the power adaptor into the DC socket in the Digital Photo Frame, and the other into the wall outlet. 2. Switching the power to the ON marking position to turn on the Digital Photo Frame. Note: To turn off the Digital Photo Frame completely, slide the power switch from ON to OFF. Inserting Media In order to play images, videos or music from a card or a memory stick, insert the card into its respective card slot on the Digital Photo Frame or use
Inhaltszusammenfassung zur Seite Nr. 15
1. Insert the SD/MMC/MS card into the 3-in-1 card slot 3. Push a USB memory stick into the USB HOST slot. with the metallic contacts facing towards the display. 2. Insert the CF card into the CF card slot with the pinholes pointing towards the photo frame. Note: Do not use any force while inserting a memory card or attaching a memory stick. The 3-in-1 card slot only reads one memory card at a time. Do not insert more than one card into one memory card slot. To remove the cards or the
Inhaltszusammenfassung zur Seite Nr. 16
Copy files from computer You can connect the digital photo frame to a computer to copy the files to the built-in memory (depends on the unit you purchase) or the card inserted on the photo frame. 1. Make sure that your computer has been started before you start. 2. Connect the mini plug of the USB cable to the mini USB port on digital photo frame, and push the other end into a free USB port on your computer. 3. The computer system detects “New hardware” and starts to install the drive
Inhaltszusammenfassung zur Seite Nr. 17
Viewing Photos Main screen Once you switch on the digital photo frame, the main screen appears. When a memory device is inserted into the Digital Photo Frame, the corresponding icon appears on the main screen. In the main screen, you can select connected source to view pictures, change frame settings, or display the calendar. 1. Touch the [M] button to access the main screen. All connected source, setup and calendar icons are displayed. USB driver Appears when you inserted a USB fla
Inhaltszusammenfassung zur Seite Nr. 18
by the priority order as follows: USB, CF, SD/MMC/MS, NAND flash (only for model with internal memory). 2. Touch the [ ] or [ ] button to select a memory source, and then touch the [ ] button. The mode menu appears. Use the [ ] or [ ] button to select Photo, Music, Movie or File. Viewing thumbnails In Photo mode, the pictures on the selected memory source can be displayed on the screen as thumbnails. Up to 15 pictures are displayed at a time. 1. Select a memory source (e.g. US
Inhaltszusammenfassung zur Seite Nr. 19
Browsing a single picture You can select a single picture to display on the screen: 1. Select a picture in the thumbnail view, and touch the [ ] button. The selected picture is displayed on the full screen. To view the previous or next photo, touch the [ ] or [ ] button. To rotate a picture, touch the [ ] or [ ] button. There will pop out a window on the screen: 2. To return to the thumbnail view, touch the [ ] button. 3. To start slide show from the current picture, tou
Inhaltszusammenfassung zur Seite Nr. 20
Using OSD menu You also can use the OSD menu to manually view the photos one by one. 1. Touch and hold the [M] button during viewing the picture or slideshow. The OSD menu appears on the screen and slideshow pauses. 2. Touch the [ ] or [ ] button to navigate between the icons on the OSD menu. To start or resume slide show from the current picture, highlight and touch the [ ] button. The icon is changed to icon. To skip to previous picture, highlight and touch the
