Bedienungsanleitung American DJ Bar-T-Cue

Inhaltszusammenfassung zur Seite Nr. 1

R
American DJ
Bar-T-Cue
OPERATION MANUAL
INTRODUCTION:

This model is used as either a 4CH. DMX chase controller or a DMX dimmer pack. It has two operating modes consisting of DMX
and MASTER modes, which allows to receive and send DMX signals. In DMX mode, it features 4 channel individual DMX address
setting. In MASTER mode, it is incorporated with 6 operating modes, MANUAL DIMMER, MANUAL PROGRAM, AUTO PROGRAM,
HOLD SOUND, PROG SOUND and AUTO SOUND. In addition, multiple units can be conne

Inhaltszusammenfassung zur Seite Nr. 2

9. F+SIGNAL SELECT+RESET BUTTONS Press to perform a reset for the whole system, which enables to return to initial condition. 10. DMX indicator blinks when preheat is effective, otherwise lights. 11. SIGNAL indicator blinks when DMX signal is available and goes out when not available. B. MASTER mode When the MASTER indicator is on, this unit is used as a DMX chase controller. 1. BUTTONS 1, 2, 3 and 4 1. Press to enable to display desired channel dimming level, corresponding indicator will blink,

Inhaltszusammenfassung zur Seite Nr. 3

APPENDIX I Additional note: To prevent current over 20A, TO ESTABLISH PROPER CONNECTION CONFIGURATION, a external circuit breaker is PLEASE REFER TO THE RIGHT ILLUSTRATION: recommended to be used. AC POWER OUTLET NOTE: USE RECOMMEND SCREW ONLY. (Dimension: M10x25mm) L N E DMX IN DMX OUT Circuit Breaker 20A 2 1 1=Ground 2=Data- 3=Data+ 3 uncontrolled CH4 L N E black white green CH3 Connect to the apparatus POWER 1/4"stereo