Inhaltszusammenfassung zur Seite Nr. 14
VIII. Appendix Display Module Drawing LT3200 Owner Manual 14 | Page
Inhaltszusammenfassung zur Seite Nr. 15
Driver Box Drawing LT3200 Owner Manual 15 | Page
Inhaltszusammenfassung zur Seite Nr. 16
Troubleshooting A properly-functioning LT3200 will show a “splash screen” when power is first applied. If a suitable video source is attached, the screen will then display whatever video image is being sent to the LT3200 shortly after the splash screen appears. Note that when power is applied you should also see light from the LEDs located around the perimeter of the AMLCD screen. When power is being supplied to the LT3200 power supply, the indicator light on the power brick will gl
Inhaltszusammenfassung zur Seite Nr. 17
LT3200 Specifications This section contains specifications for the LT3200 display. Product Name LT3200 Planar Part Number 997‐6868‐00 Viewable Size 31.25" diagonal (27.3” x 15.2”) Viewing Angle (Typical) 178° Horizontal and Vertical Response Time (G‐to‐G, Typical) 8 msec Brightness (Typical) Dependant on customer enclosure design Native Display Resolution 1366 x 768 Aspect Ratio 16:9 Color Palette 16.7 million colors Pixel Pitch 0.511 mm Refresh Rate 50 to 60 Hz
Inhaltszusammenfassung zur Seite Nr. 18
Power Supply External AC adapter, 48V DC Power Requirements 100‐240 VAC (50/60 Hz) Power Consumption 125W Module Mounting Built‐in mounting bracket, see outline drawing Service and Support 3‐Year Warranty Product Approvals NRTL Listed, FCC‐Class A, CE, RoHS Environmental ‐ Operating 0° to 40°C Temperature Environmental ‐ Operating ‐10° to 50°C Temperature LT3200 32" LookThru LCD module, Driver Box, Power Brick In the Box and Cord, HDMI Cable, User’s Manual
Inhaltszusammenfassung zur Seite Nr. 19
Graphics Input Compatibility The LCD monitor has been tested to synchronize to, and scale the following digital signal graphics inputs and generate a stable display that has a similar geometry. Mode Resolution V‐Frequency (Hz) VGA 640 x 480 60 WVGA 800 x 480 60 SVGA 800 x 600 60 XGA 1024 x 768 60 WXGA 1280 x 720 60 WXGA 1280 x 768 60 HD 1366 x 768 60 Regulatory Compliance FCC Radio Frequency Interference Statement This equipment has been tested and found to com
Inhaltszusammenfassung zur Seite Nr. 1
Planar LT3200 Owner Manual
LT3200 Owner Manual
1 | Page
Inhaltszusammenfassung zur Seite Nr. 2
This manual is designed for use with the Planar® LT3200 LookThru™ open frame transparent display. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information contained in this document is subject to change without notice. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be reproduced, translated to another langu
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents I. PRECAUTIONS ............................................................................................................................ 4 II. LT3200 PRODUCT DESCRIPTION ........................................................................................... 5 III. LT3200 DISPLAY COMPONENTS ............................................................................................ 6 IV. PRODUCT ARCHITECTURE .......................................
Inhaltszusammenfassung zur Seite Nr. 4
I. Precautions and Warnings To maximize the life and safe use of your Planar product, always be sure to follow the warnings and precautions in this product guide. Important Instructions: 1. Read, retain, and heed all warnings and instructions. 2. You must follow all National Electrical Code regulations. In addition, be aware of local codes and ordinances when installing your system. Do: Keep in mind this is an open frame display component. It has components that are fragile
Inhaltszusammenfassung zur Seite Nr. 5
II. LT3200 Product Description The Planar LT3200 is a high performance open frame transparent display for use indoors in a customer-designed enclosure. Possible digital signage applications include various retail, marketing and other digital showcase uses. The contemporary, bezel-less design and the Planar-modified, high-definition (HD, resolution 1366x768) active matrix liquid crystal display (AMLCD) provide extraordinary, eye-catching transparent display performance with best in cl
Inhaltszusammenfassung zur Seite Nr. 6
III. LT3200 Display Components Front and Back Views of the Display Front View ‐ Heat strengthened Glass with AR coating AMLCD Circuit Cover Plate LED Strips (6x) Display Mounting Brackets (2x) Display Chassis Rear View – Display chassis with LED illuminators and mounting brackets Edge Views of the Display Cable Strain Display Mounting AMLCD Assembly AMLCD Circuit Cover Plate Relief Pad Brackets (2x) Display Chassis Front Glass Display Mounting AMLCD Circuit
Inhaltszusammenfassung zur Seite Nr. 7
LC3200 Display Components, cont’d Top, Backside and Edge Views of the Driver Box Cable Grommet Driver Box Lid Fasteners Top View Power Switch Backside View DisplayPort HDMI 48V Input from Power Switch Power Brick Edge View LT3200 Owner Manual 7 | Page
Inhaltszusammenfassung zur Seite Nr. 8
IV. Product Architecture LT3200 Block Diagram LT3200 Owner Manual 8 | Page
Inhaltszusammenfassung zur Seite Nr. 9
V. Designing an Enclosure for your LT3200 The LT3200 open frame display will provide best in class transparent display performance, but the enclosure design is a critical contributor to the appearance and operation of the full display assembly. We encourage our customers to be creative in designing their presentation configuration using the LT3200. To achieve optimum results, we recommend the following: - Orientation: the display can be used in portrait, landscape or countertop (ho
Inhaltszusammenfassung zur Seite Nr. 10
VI. Connecting the Driver Box The LT3200 is shipped with the wiring bundle disconnected from the Driver Box so the free end of the bundle can be routed in the enclosure as part of the assembly process. This section describes how to connect the wiring bundle to the Driver Box. You will need a small (#1) Phillips screwdriver. Note: It is important to follow the instructions carefully and observe safe ESD practices, especially if the assembly is taking place away from a grounded wor
Inhaltszusammenfassung zur Seite Nr. 11
4- Locate the video connector in cable assembly as shown in photo 4 at right. 5- Orient the video plug as seen in Photo 5A. Insert the edge into its socket on the video board. Align the connector parallel to the socket and gently slide the connector into the socket (Photo 5B). Using steady pressure between thumb and fingernail of index finger, seat the connector. A properly inserted connector will have the backside of the connector located parall
Inhaltszusammenfassung zur Seite Nr. 12
7- Once the LED connector, the two ground connections, and the video connector have been attached, position the rubber grommet into the slot in the box as shown in Photo 7. 8- Position the lid over the lower half of the box as shown, making sure the tab in the lid (arrow in Photo 8) captures the grommet. 9- Refasten the four Phillips screws to secure the Driver Box cover. The assembled Driver Box is shown in Photo 9 at ri
Inhaltszusammenfassung zur Seite Nr. 13
VII. Presentation of Your Material using the LT3200 You should experiment with placement of the objects to be displayed in the LT3200 to optimize their appearance and interaction with your video content. You will find that the brightness of display box and the legibility of the screen content can be affected by the color of objects placed in the display box. For best results we suggest avoiding large areas of dark colors inside the display box. Most conventional digital signage vi
