Inhaltszusammenfassung zur Seite Nr. 1
KODAK EASYSHARE Digital Frame
Extended user guide
P725/P825
www.kodak.com
For help with your digital frame, www.kodak.com/go/digitalframesupport
Inhaltszusammenfassung zur Seite Nr. 2
Eastman Kodak Company Rochester, New York 14650 © Eastman Kodak Company, 2009 All screen images are simulated. Kodak and EasyShare are trademarks of Eastman Kodak Company. P/N 4H6588_en
Inhaltszusammenfassung zur Seite Nr. 3
Product features Top—buttons and controls Delete from frame Navigation Copy to frame Next picture OK/Play/Pause Previous picture Play speed/transition Play order Slow w/Wipe Shuffle Medium w/Pan Zoom By Date Fast w/Fade www.kodak.com/go/support i
Inhaltszusammenfassung zur Seite Nr. 4
Side—power and connectors Power USB connector Memory card slot SD/SDHC/MMC/MS/XD Memory card slot MS/MS Pro Duo Stand DC-in* * See Attaching the power cable, page 1 and Attaching the stand, page 2. ii www.kodak.com/go/support
Inhaltszusammenfassung zur Seite Nr. 5
Table of contents 1 1 Getting started ......................................................................................1 Attaching the power cable ............................................................................1 Attaching the stand.......................................................................................2 Turning your frame on and off.......................................................................2 Inserting a memory card....................................
Inhaltszusammenfassung zur Seite Nr. 6
1 Getting started Welcome to your KODAK EASYSHARE Digital Frame. Viewing your pictures couldn’t be simpler! Attaching the power cable CAUTION: Do not use this power cable with other devices, including digital cameras. Your power cable may look different from the one pictured. Use the plug that accommodates your type of power outlet. 1 www.kodak.com/go/support
Inhaltszusammenfassung zur Seite Nr. 7
Getting started Attaching the stand 2 1 Snap the stand onto the frame. 1 Route the power cord through the 2 cutout in the stand. Turning your frame on and off Power button - press and hold (for about 2 seconds), then release NOTE: Your frame may contain pre-loaded sample pictures, which play only when there are no other pictures loaded (from a memory card, USB device, or internal memory). Sample pictures may not be deleted. www.kodak.com/go/support 2
Inhaltszusammenfassung zur Seite Nr. 8
Getting started Inserting a memory card To insert a card, push it firmly into the slot until it clicks and stops. To remove a card, pull it out of the slot. Top slot*: SECURE DIGITAL/SECURE DIGITAL High Capacity (SD/SDHC) MMC (MULTIMEDIA Card) XD MS (MEMORY STICK) Bottom slot: MS/MS Pro Duo (MEMORY STICK) *IMPORTANT: Do not insert an MS Pro or MS Pro Duo card in the top slot. It may be difficult to remove. Connecting a USB device Supported USB devices include a flash drive, card reader, hard
Inhaltszusammenfassung zur Seite Nr. 9
2 Viewing pictures Pictures play from the frame’s internal memory when no card or USB device is inserted. Pictures play from a memory card or USB device when one is inserted in the frame. NOTE: Your frame may contain pre-loaded sample pictures, which play only when there are no other pictures loaded (from a memory card, USB device, or internal memory). Sample pictures may not be deleted. Viewing pictures from internal memory ■ Turn on the frame. The pictures in your frame’s internal memory
Inhaltszusammenfassung zur Seite Nr. 10
Viewing pictures Navigating through your pictures Press the arrow buttons to navigate through your pictures. Previous picture Next picture Play/Pause Navigation and play buttons To move more quickly through your pictures, press and hold an arrow button. Previous picture—Go to the previous picture. Play/Pause—Start or pause play. Next picture—Go to the next picture. Setting automatic shut-off time The energy saver feature automatically turns the frame off after 16 hours. The screen dims 5 minut
Inhaltszusammenfassung zur Seite Nr. 11
Viewing pictures Changing play speed, transitions, and order Move the sliders to change the setting. Play speed/transition Play order Play speed and transition Change how long each picture stays on the screen and the type of transition between pictures. Slow—pictures change every 60 seconds, with wipe transition. Medium (default)—pictures change every 10 seconds, with pan and zoom transition. Fast—pictures change every 5 seconds, with fade transition. Play order Change the order in which your p
Inhaltszusammenfassung zur Seite Nr. 12
3 Doing more with your frame Deleting pictures from the frame You can delete pictures from your frame’s internal memory, but not from a memory card or USB device. 1 Remove a memory card or USB device from the frame, if inserted. 2 While pictures are playing from internal memory, press the Delete button. 3 Select the pictures to delete: ■ To delete the currently displayed picture: Press the Next arrow button once to highlight Delete single . Delete all ■ To delete all of the pictures in the
Inhaltszusammenfassung zur Seite Nr. 13
Doing more with your frame Copying pictures to internal memory Copy pictures from a memory card or USB device into your frame’s internal memory. Copying to a memory card or USB device is not supported. CAUTION: Removing a card or disconnecting a device while copying may damage your card, pictures, or device. 1 Insert a memory card or USB device (flash drive, card reader, hard drive). See page 3. The pictures start playing. 2 Press the Copy button. The copy screen shows where you are copying
Inhaltszusammenfassung zur Seite Nr. 14
Doing more with your frame Upgrading your firmware (recommended) Firmware is the software that runs on your frame. Download and install the latest version from the Web to keep your frame up to date. Check your frame’s current firmware version ■ Turn your frame on. Press the Power and the Next buttons at the same time and hold for 5 seconds. Note the firmware version listed on the About screen. Download the latest firmware 1 On your computer, go to www.kodak.com/go/digitalframedownloads. 2 Ente
Inhaltszusammenfassung zur Seite Nr. 15
Doing more with your frame Maintaining your frame IMPORTANT: Always disconnect the power before cleaning. Do not use water, cleaning solutions, or other adhesives on the frame or any of its parts. Gently wipe the frame and screen with a clean, dry, lint-free cloth. For fingerprints on the frame, apply light pressure. www.kodak.com/go/support 10
Inhaltszusammenfassung zur Seite Nr. 16
4 Troubleshooting and support For step-by-step product support, visit www.kodak.com/go/digitalframesupport, select your frame model, and select Step-by-Step Solutions & Repair. Learning more about your frame www.kodak.com/go/digitalframes Learn more about your frame www.kodak.com/go/digitalframesupport Interactive tutorials Frequently asked questions Downloads Product registration Picture frame problems If... Try one or more of the following Frame does not ■ Make sure the power cable that was i
Inhaltszusammenfassung zur Seite Nr. 17
Troubleshooting and support If... Try one or more of the following Nothing happens when ■ Insert a certified SD/SDHC/MMC/XD Card, with images, into the upper designated card slot, then push to seat it (see page 3). a memory card or USB device is connected. ■ Insert a certified MS/MS Pro Duo Card, with images, into the lower designated card slot only, then push to seat it (see page 3). NOTE: Do not insert an MS Pro or MS Pro Duo card in the top slot. It may be difficult to remove. ■ Make sure
Inhaltszusammenfassung zur Seite Nr. 18
Troubleshooting and support Identifying graphic messages Graphics appear on the screen to let you know what’s happening with your pictures and your frame. Graphic Description Internal memory—the current picture source is the frame’s internal memory. Memory card—the current picture source is an inserted memory card. USB device—the current picture source is a USB flash drive or other USB device. Pause—picture play is paused. Copy—appears when you press the Copy button (see page 8). Default sel
Inhaltszusammenfassung zur Seite Nr. 19
Troubleshooting and support Identifying error messages Error icon and meaning Try one or more of the following The card/device is empty. ■ Insert a different card or device with pictures (see page 3). The card/device is unreadable or corrupt. File is corrupted or it’s an ■ See page 15 for supported file formats. unsupported file format. Internal memory is full, ■ Delete pictures from internal memory (see page 7). unable to copy. Copy error—no memory ■ Insert a memory card or USB device and p
Inhaltszusammenfassung zur Seite Nr. 20
5 Appendix Digital frame specifications For more specifications, visit www.kodak.com/go/digitalframesupport. KODAK EASYSHARE P725/P825 Digital Frames Color display P725 17.8 cm (7 in.) diagonal digital LCD, 800 x 600 pixels, 4:3 aspect ratio, 14.2 x 10.6 cm (5.6 x 4.2 in.) active area P825 20.3 cm (8 in.) diagonal digital LCD, 800 x 600 pixels, 4:3 aspect ratio, 16.2 x 12.2 cm (6.4 x 4.8 in.) active area Internal storage capacity P725, P825 512 MB Power supply Manufacturer, Model #: Malata MPA
