Inhaltszusammenfassung zur Seite Nr. 1
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
FCC COMPLIANCE STATEMENT FOR AMERICAN USERS This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits arc designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception,
Inhaltszusammenfassung zur Seite Nr. 4
IMPORTANT SAFETY INSTRUCTIONS 1. Read all of these instructions and save them for later reference. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning the outside of the unit. 4. Do not use this product near water. 5. Do not place this product on an unstable cart, stand, or table. The product may fall,, causing serious damage to the product. 6. Slo
Inhaltszusammenfassung zur Seite Nr. 5
10. If an extension cord is used with this product, make sure that the total of the ampere ratings on the products plugged into the extension cord do not exceed the extension cord ampere rating. Also, make sure that the total of all products plugged into the wall outlet does not exceed 15 amperes. 11. Never push objects of any kind into this product through cabinet slots, as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never sp
Inhaltszusammenfassung zur Seite Nr. 6
Contents 1 Introduction Features ......................................... . 1 2 Options and Supplies ............................. . About This Manual ............................... . 4 Where To Get Help ............................... . 5 ......................... . 6 Ink Jet Printer Precautions Chapter 1 Setting Up the Printer 1-1 Choosing a Place for the Printer .................... . 1-2 Unpacking the Printer ............................ . 1-4 ............... . 1-6 Removing the Protective
Inhaltszusammenfassung zur Seite Nr. 7
................... . 1-46 Connecting the Serial Interface .................. . 1-49 Using Your Printer with Software .................. . 1-49 Selecting the Best Printer Mode. ........................ . 1-50 How Your Printer Works 2-1 Chapter 2 Using the Printer ................................ . 2-2 The Control Panel ................................... . 2-2 The Display ................................ . 2-3 Indicator Lights 2-4 Buttons ....................................... . ...............
Inhaltszusammenfassung zur Seite Nr. 8
........................... . 4-10 Using a Memory Board. ...................... . 4-10 Installing a Memory Board .................... . 4-15 Checking the Memory Board. ............................ . 4-16 Using Interface Boards ..................... . 4-17 Installing an Interface Board ......................... . 4-22 Setting up Your System 5-1 Chapter 5 Maintenance and Transportation .............................. . 5-2 Cleaning the Printer 5-4 .......................... . Cleaning the Print Hea
Inhaltszusammenfassung zur Seite Nr. 9
7-1 Chapter 7 Technical Specifications ............................. . 7-2 Printer Specifications Printing ....................................... . 7-2 7-2 Resident Fonts ................................. . ................................. . 7-3 Paper Delivery ....................................... . 7-5 Paper.. Printable Area ................................. . 7-8 ........................................... . 7-14 Ink .................................... . 7-15 Mechanical 7-16 Electrical ..
Inhaltszusammenfassung zur Seite Nr. 10
B-1 Appendix B Modes and Commands B-2 .......................... . Available Printer Modes. .......... . B-2 Setting the Printer Mode With SelecType ...................... . B-2 Printer Driver Information. B-3 ....................... . Fonts and Font Cartridges B-4 HP Emulation.................................... . B-4 Unique Features................................ . B-5 ............. . Command Summary for HP Emulation .......... . B-5 EPI-4000 and HP Command Differences. B-6 ..................
Inhaltszusammenfassung zur Seite Nr. 11
Introduction ® The Epson EPI-4000 combines high performance and reliability with a wide range of features. The EPI-4000 uses ink jet technology for fast, quiet, high-quality printing. A powerful processor drives the EPI-4000’s imaging system, allowing it to compose an entire page in internal memory before printing. Features In addition to the high-quality printing and ease of operation you’d expect from an Epson printer, these features make using the EPI-4000 a snap: Flexible paper handling so
Inhaltszusammenfassung zur Seite Nr. 12
Introduction l The ability to print up to two letter size pages or one ledger size page of text per minute. ® l Two built-in interfaces: Centronics parallel and RS-232C. Options and Supplies Many options are available to enhance your EN-4000 printer. For detailed information on the installation and use of these options, see Chapter 4. Font cards Optional font cards are available from your Epson dealer. These cards contain additional fonts to supplement the internal fonts resident in your printe
Inhaltszusammenfassung zur Seite Nr. 13
Introduction Coax and Twinax interface boards These two interfaces let you use the EPI-4000 as a local system ® printer for an IBM mainframe or minicomputer. You can install the boards quickly and easily inside the printer without any additional hardware. IEEE interface board The IEEE-488 interface offers standardized connections, trouble-free operation, and the ability to connect computers, printers, and other devices on the same line to share data freely. Serial interface boards These interfa
Inhaltszusammenfassung zur Seite Nr. 14
Introduction About This Manual This user’s manual provides fully illustrated, step-by-step instructions on setting up and operating your Epson EN-4000 printer. Finding your way around Chapter 1 contains information on unpacking, setting up, testing, and connecting the printer. Be sure to read and follow these instructions first. Chapters 2 and 3 cover general printer operation and paper handling. This important information is necessary for the day- to-day operation of your printer. Chapter 4 sho
Inhaltszusammenfassung zur Seite Nr. 15
introduction Conventions used in this manual WARNINGS must be followed carefully to avoid damage CAUTIONS should be followed carefully to ensure that your printer operates correctly. Notes contain important information and useful tips on the Where to Get Help Customer support and service for Epson products are provided by a network of authorized Epson dealers and Customer Care Centers throughout the United States. Epson America provides product information and support to its dealers and Customer
Inhaltszusammenfassung zur Seite Nr. 16
Introduction Ink Jet Printer Precautions The EPI-4000 uses ink jet technology. Even if you are familiar with other types of printers, please read and observe the following precautions to ensure safe, efficient operation. • Never put your hand inside the printer while it is printing. • Cartridge ink contains propyl alcohol. If the ink comes in contact with your skin, wash immediately with soap and water. If ink gets in your eyes, flush them immediately with plenty of water. • If ink accidentally
Inhaltszusammenfassung zur Seite Nr. 17
Introduction l If you must turn the printer off in the midst of printing, first press ON LINE to set the printer off line, wait three seconds, and then turn the power off. l The EPI-4000 uses an electric heater to dry the ink as the page is released to the output tray. For best print quality, do not touch the finished page until the printer completes delivery to the output tray. l The paper output slot at the back of the printer may become warm during printing. This is because of the electric he
Inhaltszusammenfassung zur Seite Nr. 18
Chapter 1 Setting Up the Printer Choosing a Place for the Printer ........................................... 1-2 Unpacking the Printer.. ............................................................ 1-4 Removing the Protective Materials.................................... 1-6 Checking the Parts.. .............................................................. 1-10 Carrying the Printer ............................................................. 1-11 Assembling the Printer .......................
Inhaltszusammenfassung zur Seite Nr. 19
Choosing a Place for the Printer There are several important things to consider when selecting a place to set up your printer. Keep the following in mind: l Leave enough room around the printer to allow easy operation and maintenance and unrestricted flow of air. The illustrations below show how much space is required. Setting Up the Printer 1-2
Inhaltszusammenfassung zur Seite Nr. 20
Choosing a Place for the Printer Place the printer on a. flat, hard, stable surface. A soft surface, such as a carpeted area, blocks the ventilation slots and may cause overheating. Place the printer close enough to the computer for the printer cable to reach. Use a grounded outlet with three holes to match the plug on the printer. Do not use an adapter plug. WARNING: l Avoid locations that are subject to direct sunlight, excessive heat:, moisture, or dust. l Avoid electrical outlets controlled
