Inhaltszusammenfassung zur Seite Nr. 1
Quick Installation Guide
TV-IP400
TV-IP400W
Inhaltszusammenfassung zur Seite Nr. 2
Table of Contents Table of Contents 1 English ...................................................................................................... 1. Before You Start ................................................................................. 1 2. Hardware Installation ......................................................................... 2 3. Configure the Internet Camera .......................................................... 3 Troubleshooting ............................
Inhaltszusammenfassung zur Seite Nr. 3
1. Before You Start Package Contents TV-IP400/TV-IP400W Quick Installation Guide Mounting plate Utility CD-ROM AC Power Adapter 1 x 2dBi Detachable Antenna (TV-IP400W) System Requirements CD-ROM Drive 10/100Mbps Ethernet CPU: 1GHz or above Memory: 256MB or above VGA Resolution: 800 x 640 or above Web Browser: Internet Explorer 5.0 or above Application Office Parking Monitoring Monitoring (TV-IP400W) (TV-IP400) Workstation with PCI Adapter (TE100-PCIWN) Firewall Router Wireless Access Point
Inhaltszusammenfassung zur Seite Nr. 4
2. Hardware Installation 1. Place the camera on a flat, level surface. 2. Attach the Antenna. (TV-IP400W) 3. Connect the AC Power Adapter to the back of the camera. 4. Connect the AC Power Adapter to a power outlet. 5. Connect a RJ-45 network cable from a Switch/Hub to the Ethernet port of the Internet Camera. 2 English
Inhaltszusammenfassung zur Seite Nr. 5
3. Configure the Internet Camera Note: It is recommended that you configure the Internet Camera from a wired computer. Before the Internet Camera can be configured, a Static IP address must be assigned on your computer's network adapter in the subnet of 192.168.0.x. Since the Internet Camera's default IP address is 192.168.0.20, make sure no other network devices are assigned an IP address of 192.168.0.20. (Refer to the Troubleshooting section on how to configure TCP/IP settings on yo
Inhaltszusammenfassung zur Seite Nr. 6
4. Click Wireless. Configure your wireless settings to match your wireless network's settings and then click Save. (TV-IP400W only) 5. Click ActiveX or Java Mode. Your installation is now complete. Note: For detailed information regarding the TV-IP400/TV-IP400W configuration and advanced settings, please refer to the Troubleshooting section, User's Guide on the Utility CD-ROM, or TRENDnet's website at http://www.trendnet.com. 4 English
Inhaltszusammenfassung zur Seite Nr. 7
Troubleshooting Q1: How do I configure TCP/IP settings on my computer? 1. Go into the Control Panel and double- click the Network Connections icon, and then right-click the Local Area Connection icon and then click Properties. 2. Click Internet Protocol (TCP/IP) and then click Properties. Then click on Use the following IP address, and make sure you assign your network adapter an IP address in the subnet of 192.168.0.x. Q2: When I click on ActiveX or Java, the image does not load? A
Inhaltszusammenfassung zur Seite Nr. 8
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation. Waste electrical and electronic products must not be disposed of with household waste. Please recycle where facilities exist. Check with you Local Authority or Retailer for recycling
Inhaltszusammenfassung zur Seite Nr. 9
TRENDnet Technical Support . US Canada Toll Free Telephone: 1(866) 845-3673 24/7 Tech Support . . . . . Europe (Germany France Italy Spain Switzerland UK) Toll Free Telephone: +00800 60 76 76 67 English/Espanol - 24/7 Francais/Deutsch - 11am-8pm, Monday - Friday MET Worldwide Telephone: +(31) (0) 20 504 05 35 English/Espanol - 24/7 Francais/Deutsch - 11am-8pm, Monday - Friday MET Product Warranty Registration Please take a moment to register your product online. Go to TRENDn
