Inhaltszusammenfassung zur Seite Nr. 1
SVAT ELECTRONICS
Now You Can See
WIRELESS INDOOR
COLOR CAMERA SYSTEM
COMPLETE SYSTEM
Instruction Manual
Model #
GX5201
www.svat.com
Inhaltszusammenfassung zur Seite Nr. 2
SVAT ELECTRONICS Now You Can See PRODUCT WARRANTY & REGISTRATION Please visit our website at www.svat.com to apply for your products warranty registration. The warranty registration for is located under the support tab on the SVAT website. We take quality very seriously. This is why all of our products come with a one year warranty from the original purchase date against defects in workmanship and materials. If you have warranty or support issues please contact us using any of the following
Inhaltszusammenfassung zur Seite Nr. 3
SVAT ELECTRONICS Now You Can See TABLE OF CONTENTS WHAT IS INCLUDED ............................................................1 WHAT IS COMPATIBLE ........................................................1 FEATURES............................................................................2 THINGS TO CONSIDER ......................................................2 INSTALLING THE CAMERA ................................................2 INSTALLING THE MONITOR...................................
Inhaltszusammenfassung zur Seite Nr. 4
SVAT ELECTRONICS Now You Can See FEATURES - 2.4 GHz wireless technology - Plug & Play installation - 2.5 inch TFT-LCD screen - Adjustable brightness, color, contrast, alarm volume and audio volume - The system supports up to 3 cameras - IR Night vision allows you to see in the dark up to 10ft away - The LCD monitor has 3 modes: Scan, Auto, and Manual - Monitor can be connected to a VCR/DVR using the A/V output port - Color camera with sound activated alarm - Adjustable delay/cycle time betwee
Inhaltszusammenfassung zur Seite Nr. 5
SVAT ELECTRONICS Now You Can See INSTALLING THE LCD MONITOR Main Operation 1. Plug the monitor's power supply into the power jack located inside the battery compartment of the monitor. The monitor can also be operated using 4-AAA batteries. Note: It is recommended that you use the provided AC adapter to power the monitor. Batteries are recommended for portability and can last up to 200 minutes. 2. Turn on the monitor by pressing the power button on the top of the unit. 3. To connect the monit
Inhaltszusammenfassung zur Seite Nr. 6
SVAT ELECTRONICS Now You Can See Accordingly the DIP switch located on the back of the monitor should be adjusted to reflect the channel in use. Night Vision The camera includes 8 built-in IR LEDs, which allow viewing of up to 5 feet in the dark. To turn on the IR LEDs, use the small switch on the side of the camera. Switching it to the moon icon activates night vision, and switching it to the sun icon turns it off. Sound-Activated Alarm Feature When the camera detects sound, an audio alert s
Inhaltszusammenfassung zur Seite Nr. 7
SVAT ELECTRONICS Now You Can See the preset level, the monitor will display the picture from that camera for a few seconds, and the beeper will sound. To avoid searching the channels that do not have cameras/transmitters assigned to them, set those corresponding dip switches (located on the back panel of the monitor) to the OFF position. The dwell/cycle time (time taken to switch between cameras) is preset to four seconds and can be adjusted between 2-30 seconds. To adjust the dwell/cycle tim
Inhaltszusammenfassung zur Seite Nr. 8
SVAT ELECTRONICS Now You Can See TROUBLESHOOTING If you are having trouble operating this product, please consult the guide below: Symptom Remedies No camera Picture 1. Check all connections and AC adapters. Make sure camera(s) and monitor are switched ON. 2. Ensure camera(s) and monitor are set to correct channels. 3. Make sure camera is within range of the monitor. Blank Monitor 1. Make sure the monitor is switched ON. 2. If using the AC adapter, make sure it is plugged in. 3. Make sure the
Inhaltszusammenfassung zur Seite Nr. 9
SVAT ELECTRONICS Now You Can See SPECIFICATIONS Camera TV System NTSC or PAL standard Integrated Lens 5.6 mm, fixed focus Resolution 360 horizontal TV lines Signal/Noise Ratio 48dB Image Sensor 1/3" CMOS Min. Illumination 0.1 lux Current Consumption 150 mA Frequency Range 2.41~2.47 GHz Modulation FM Channel Selection Electronic tuning with PLL Overall Size 4.25" x 3.75" x 2.5" Monitor Frequency Range 2.41~2.47 GHz Current Consumption 350 mA Channel Selection Electronic tuning with PLL Signal
Inhaltszusammenfassung zur Seite Nr. 10
SVAT ELECTRONICS Now You Can See DRILLING TEMPLATE To wall mount the camera, drill two holes using a 1/4" drill bit and the template below. Insert supplied wall anchors into holes and secure camera to wall with supplied screws. GX5201 8
Inhaltszusammenfassung zur Seite Nr. 11
SVAT ELECTRONICS Now You Can See GX515B Rechargeable 9V Battery Pack For ultimate portability look for the GX515B rechargeable battery pack that provides up to 4 hours of continuous use. The GX515B easily attaches to the bottom of the GX515 camera for a completely wireless surveillance system. (Not included with the GX5201) Visit www.svat.com for more information on the GX515B Battery Pack GX5201 9
Inhaltszusammenfassung zur Seite Nr. 12
SVAT ELECTRONICS Now You Can See www.svat.com Disclaimer SVAT does not endorse any of SVAT products for any illegal activities. SVAT is not responsible or liable in any way shape or form for any damage, vandalism, theft or any other action that may occur while a SVAT product is in use by the purchaser. Model # GX5201 www.svat.com
