Inhaltszusammenfassung zur Seite Nr. 10
GETTING TO KNOW YOUR CAMERA Front View 1 2 3 4 5 6 7 8 9 10 1. Shutter button 2. Power button 3. Speaker 4. Self-timer LED 5. Flash 6. Focus switch 7. Lens 8. USB terminal 9. Microphone 10.DC IN 9V terminal EN-9
Inhaltszusammenfassung zur Seite Nr. 11
Rear View 1 2 3 4 5 6 7 8 9 10 11 17 16 15 14 13 12 1. LCD display 10. Right button a Flash mode button 2. Paper tray door latch 11. Delete button 3. T Zoom in button W Zoom out button 12.Hand strap holder 4. Status LED 13.PRINT Print button 5. Mode button (Image capture and 14. Down button playback) Scene button 6. Menu button 15. Left button 7. Up button e Self-timer button Display button 16.Tripod socket 8. OK Set button 17.Battery / SD card door 9. Photo exit slot EN-10
Inhaltszusammenfassung zur Seite Nr. 12
LCD Display Capture mode 1 2 3 16 1. Zoom status 15 2. Flash mode 4 14 [Blank]Auto Flash 5 [ Y ] Red-eye Reduction 13 6 [ _ ] Pre-flash 12 7 [ a ] Always ON 11 + + 0.3 0.3 8 [ d ] Flash Off 0 00001 00001 0001 10 3. Battery level [l] Full battery power 9 13.White balance [o] Medium battery power [n] Low battery power [Blank] Auto [ $ ] Tungsten [m] No battery power 4. Storage media [ & ] Fluorescent 1 [ * ] Fluorescent 2 [ r ] Internal memory (no card) [ q ] SD/SDHC mem
Inhaltszusammenfassung zur Seite Nr. 13
Video mode [6] 1 2 3 1. Zoom status 12 2. Flash mode 4 4x 4x x 3. Battery level 11 4 4. Storage media 5. Main focus area 5 6. Video quality 6 7. Video resolution 7 8. Available recording time/Elapsed time during 2008 / 03 / 01 00 : 00 2008 / 03 / 01 00 : 00 00 : 21 00 : 21 recording 10 9 8 9. Self-timer icon 10.Date and time 11. Focus setting 12.Mode icon Playback mode [7] - Still image playback 1. Battery level 2. Storage media 1 13 x 3. ISO 2 12 4. Image quality 3 11 5. Image size resolution
Inhaltszusammenfassung zur Seite Nr. 14
GETTING STARTED Preparation 1. Attach the camera’s hand strap as shown in the illustration. 2. Open the battery/SD card door. 3. Insert the battery in the correct orientation as shown in the illustration. 4. Insert an SD/SDHC memory card (Optional). The camera has 16MB internal memory (4MB available for image storage), but you can load an SD/SDHC memory card (We recommend the use of a Polaroid SD card - purchased separately - up to 4GB) to expand the camera’s memory capacity. Be sure to form
Inhaltszusammenfassung zur Seite Nr. 15
Installing Polaroid PoGo™ ZINK Photo Paper™ Insert the photo paper before printing images. 1. Slide the latch on the paper tray door as shown in the illustration. 2. Unwrap the 10-pack of Polaroid PoGo™ ZINK Photo Paper™. 3. Slide the 10-pack of Polaroid PoGo™ ZINK Photo Paper™ into the paper tray. Make sure the ZINK Smart Sheet™ is placed and loaded with the bar code face down. Shiny side of paper faces up. 4. Close the paper tray door. The ZINK Smart Sheet™ will automatically eject. The
Inhaltszusammenfassung zur Seite Nr. 16
Charging the Battery The AC power adapter charges the battery and also powers the camera. Make sure that the camera is turned off and the battery is inserted before starting. 1. Insert one end of the AC power adapter into the DC IN 9V terminal of the camera. 2. Insert the other end of the AC power adapter into a wall outlet. The status LED is orange when charging and is green when charging is complete. Charging time varies according to the ambient temperature and the age of the battery. Th
Inhaltszusammenfassung zur Seite Nr. 17
Initial Settings Setting the Date and Time The date/time needs to be set when: The camera is turned on for the first time. The camera is turned on after leaving the camera without the battery for an extended period of time. When the date and time information is not displayed on the LCD display, follow these steps to set the correct date and time. 1. Toggle the button to [ P ]. 2. Press the button. 3. Select [Setup] with the button. 4. Select [Date/Time] with the / buttons, and press the O
Inhaltszusammenfassung zur Seite Nr. 18
Choosing your Language Specify what language in the menus and messages are to be displayed on the LCD display. 1. Toggle the button to [ ] or [ 7 ]. P 2. Press the button. 3. Select [Setup] menu with the button. 4. Select [Language] with the / buttons and press the OK button. 5. Select the displayed language with the / buttons and press the OK button. The setting will be stored. Formatting the Memory Card or Internal Memory This utility formats the internal memory (or memory card) and er
Inhaltszusammenfassung zur Seite Nr. 19
CAPTURE MODE Capturing Images Your camera is equipped with a 3.0" full color TFT LCD display to help you compose images, playback recorded images/video clips or adjust menu settings. 1. Press the button to turn the power on. 2. Toggle the button to [ P ]. Set the focus switch to [ O ] if you want to capture a close-up image (0.6 to 1.45m: 2 to 5 feet). Toggle the abutton to select the appropriate flash mode setting. If flash mode is set to _, this “Pre-flash” mode allows you to brighten the
Inhaltszusammenfassung zur Seite Nr. 20
Setting the Self-timer This setting allows images to be captured with self-timer. 1. Toggle the e button to select the setting. Each press of the e buttton moves the icon one step through the sequence and displays it on the screen. 2. Compose your image in the LCD display. 3. Press the shutter button. The self-timer LED flashes and the camera beeps (if beep is turned on). The image will be captured after the preset time has elapsed. The countdown is displayed on the LCD screen. To cancel the
Inhaltszusammenfassung zur Seite Nr. 1
Inhaltszusammenfassung zur Seite Nr. 2
FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against ha
Inhaltszusammenfassung zur Seite Nr. 3
This product contains electrical or electronic materials. The presence of these materials may, if not disposed of properly, have potential adverse effects on the environment and human health. Presence of this label on the product means it should not be disposed of as unsorted waste and must be collected separately. As a consumer, you are responsible for ensuring that this product is disposed of properly. To find out how to properly dispose of this product, please go to www.polaroid.com and click
Inhaltszusammenfassung zur Seite Nr. 4
SAFETY INSTRUCTIONS Please read all Warnings and Cautions before using this product. Warnings If foreign objects or water enter the camera, turn the power off and remove the battery. Continued use may cause personal injury. Please consult our friendly customer service. If the camera has been dropped or its case has been damaged, turn the power off and remove the battery. Continued use may cause personal injury. Please consult our friendly customer service. Do not disassemble, change or repair
Inhaltszusammenfassung zur Seite Nr. 5
Cautions Do not fire the flash close to anyone’s eyes. This may cause damage to the person’s eyesight. Do not subject the LCD display to impact. This may damage the glass on the screen or cause the internal fluid to leak. If the internal fluid comes in contact with your eyes, flush with fresh water and seek medical attention. A camera is a precision instrument. Do not drop, strike or use excessive force when handling the camera. This may cause damage to the camera. Do not use the camera in humid
Inhaltszusammenfassung zur Seite Nr. 6
Notes on Battery Usage When you use the battery, carefully read and strictly observe the Safety Instructions and the notes described below: Use only the specified battery (7.4V). Avoid extremely cold environments as low temperatures can shorten the battery life and reduce camera performance. When you are using a new rechargeable battery or a rechargeable battery that has not been used for an extended period of time (a battery that passed the expiry date is an exception), it may affect the num
Inhaltszusammenfassung zur Seite Nr. 7
Notes on Handling Polaroid PoGo™ ZINK Photo Paper™ and Print Care Keep the photo pack in a cool and dry place. Do not leave the photo pack in a place where the temperature is extremely high (e.g. a car or on the beach) for long periods. If the photo pack has been kept in a place where the temperature is extremely high or low, leave it at normal room temperature for an hour before starting to print. When holding the paper, only touch the edges of the paper. Do not touch or pull the print du
Inhaltszusammenfassung zur Seite Nr. 8
CONTENTS 8 INTRODUCTION 30 MENU OPTIONS 8Overview 30 Capture Menu 8 Package Contents 33 Video Menu 34 Playback Menu 9 GETTING TO KNOW YOUR 35 Setup Menu CAMERA 9 Front View 36 TRANSFERRING FILES TO 10 Rear View YOUR COMPUTER 11 LCD Display 36 Downloading Your Files 13 GETTING STARTED 37 USING THE CAMERA AS A PC 13 Preparation CAMERA 14 Installing Polaroid PoGo™ ZINK 38 EDITING SOFTWARE Photo Paper™ INSTALLATION 15 Charging the Battery 39 SPECIFICATIONS 16 Initial Settings 40 APPENDIX 18 CAP
Inhaltszusammenfassung zur Seite Nr. 9
INTRODUCTION Overview Congratulations on your purchase of your new Polaroid PoGo™ Instant Digital Camera. This camera is a full featured digital camera with built-in full color printer. Take digital images like any other digital camera, review them on this camera, and print just the ones you want. Package Contents Carefully unpack your camera and ensure that you have the following items: Instant Digital Camera User’s manual Software CD-ROM USB cable Camera strap Camera pouch Rechargeable
