Inhaltszusammenfassung zur Seite Nr. 1
Oregon Scientific ATC-2K
I . Camera Precautions 1
• Waterproof Feature 2
II . Technical Specifications 5
III . Computer System Requirements 6
Dear customer,
IV . Camera Description 7
V . Camera Mounting Description 9
Thank you for choosing the Oregon Scientific ATC-2K.
VI . Quick Start 11
Designed and engineered with extreme precision,
• Battery Installation 11
the Oregon Scientific ATC-2K allows you to record cool action movie footage.
• Turning On/Off the Camera 12
We recommend parent
Inhaltszusammenfassung zur Seite Nr. 2
I) Camera Precautions Waterproof Feature Notice the following guidelines when using your camera This ATC-2K camera is waterproof up to 3m. Oregon Scientific will not assume any • ATC-2K is not shock-proof. You should avoid dropping it. responsibility for malfunction of the camera caused by water getting inside as a result • For your safety, do not press the buttons on the camera during sports activities. of misuse by the user. • Do not place the camera in a damp or dusty location for extended p
Inhaltszusammenfassung zur Seite Nr. 3
Cold Weather Product Accessories Step 2: Add one extra o-ring for more protection. The pouch (not included) would help you use the ATC-2K in cold weather. For information, please visit us at www2.oregonscientic.com Add one extra o-ring for more protection, follow the same instruction as Step 1. Step 3: Replace the cover. Make sure the cover is firmly closed. Water may get inside the camera if the battery cover is not firmly closed • If the camera gets wet, wipe the water off as soon as possible
Inhaltszusammenfassung zur Seite Nr. 4
II) Technical Specifications III) Computer System Requirements Minimum System Requirements • Sensor resolution 640x480 VGA CMOS sensor • Pentium III 800 MHz or higher • Built-in memory 32MB • Windows XP, Windows 2000 • SD memory card drive supports cards of up to 2GB (Not included) • 128 MB RAM • 800 MB Free hard disk space • Movie storage: • SVGA 800 x 600 resolution video support (32 bit) 640 x 480 pixels (30* or 15 frames per second) • 16 bit Windows compatible sound device 320 x 240 pixels
Inhaltszusammenfassung zur Seite Nr. 5
17. LCD display IV) Camera Description 18. ON/OFF & Enter button 19 18 19. Movie shutter button 1. Lens 17 20. Menu button 2. Camera grip 21. Microphone 3. Screw 22. Mini-USB port 4. Nut 16 23. AV port 5. Handlebar grip 24. SD card slot 6. Helmet grip 7 8 25. SD card (not included) 7. O-ring 2 26. Battery door 8. USB cable 20 27. Batteries (not included) 9. AV cable 9 10. Rubberized patch 1 15 11. Velcro patch 23 12. Short Velcro strap 22 24 13. Long Velcro strap 21 5 25 3 14. Silicon rubber 10
Inhaltszusammenfassung zur Seite Nr. 6
Mounting the camera using the velcro strap: V) Camera Mounting Description 1. Attach the rubberized patch to the bottom of the helmet grip. The camera can be mounted in a number of ways using the straps and the Velcro patch 2+3. Place the helmet grip on the helmet, and thread the velcro strap provided. Please follow the methods of mounting as suggested below: through the helmet grip. Turn it clockwise to Fixing the position of the camera unscrew. 4. Secure the velcro strap by fastening a) Tu
Inhaltszusammenfassung zur Seite Nr. 7
d) Do not mix alkaline, standard (carbon-zinc) or rechargeable VI) Quick Start (nickel-cadmium) batteries. Only batteries of the same or equivalent Battery Installation type as recommended are to be used together. Be careful!! The edge of the base clip is sharp, e) Non-rechargeable batteries are not to be recharged. when unscrewing the cover, make sure the clip is in f) Rechargeable batteries are to be removed from the camera before being the same direction as the lens. Observe the following
Inhaltszusammenfassung zur Seite Nr. 8
Note: If the camera is connected to your PC, you have to unplug the USB Taking Video Footage cable to turn off the camera. 1. Aim at the subject you want to shoot. Inserting/Removing the SD memory Card 2. Press the 'Movie shutter button' to start recording. Make sure the ATC-2K is turned off during the insertion or the removal of the SD card (one beeping sound) The time elapsed will be Warning: The card and the data may be damaged if the SD card is inserted shown on the LCD display. or remov
Inhaltszusammenfassung zur Seite Nr. 9
5. The different mode icons are shown in the table below. VII) Menu Settings 1. Press and hold the Menu button for 2 seconds (one Icon Title Description beeping sound) to start selecting options. High resolution Large video format/ 2. You can shift through different shooting modes by (640x480 pixels) less storage capability pressing the Menu button repeatedly. The LCD will Medium resolution display each mode as you press the Menu button. Medium video format (320x240 pixels) 3. Press the En
Inhaltszusammenfassung zur Seite Nr. 10
Resolution 640 x 480, 320 x 240, 160 x 120 pixels resolution Item Picture size fps To change the resolution, press the Menu button until the VGA 30 desired resolution icon is displayed on the LCD. Press the Enter button to 640 X 480 pixel confirm your selection. VGA 15 This camera allows you to choose from three video resolutions: 640 x 480, 320 x 240 and 160 x 120 pixels. High resolution QVGA 30 video footage has better quality because it has more pixels. Lower resolution 320 X 240 pixel has fe
Inhaltszusammenfassung zur Seite Nr. 11
Sound Recording Delete All Video Footage When the sound icon is flashing, “ON” will be shown on screen. “ON” means recording sound during filming. Press the 'Movie To delete all video footage stored in your camera, press the Menu button shutter button' (one beeping sound) to switch to “OFF”, which until the LCD displays . Press the Enter button to confirm. means no recording sound. After “OFF”, it will loop back Note: It may take a few minutes to delete multiple files at one time. to “ON” after
Inhaltszusammenfassung zur Seite Nr. 12
Setting the Month SD Memory Card When adjusting the month, the “M” will be turned on. Press the On this unit, you can use SD Memory Cards of the following capacity: 'Movie shutter button' to adjust the month. Press the Enter button 8MB to 2 GB. to confirm, after which you would be able to adjust the day. To use an SD memory card, turn off the ATC-2K and insert the SD memory card. When the camera is turned on again the SD card icon will be displayed on the LCD. Setting the Day The remaining time
Inhaltszusammenfassung zur Seite Nr. 13
Available Recording Time VIII) Connecting to PC The available recording time is an approximation (these vary depending on You can acquire recorded video footage from a PC by the recording conditions and the type of card). connecting the ATC-2K to the PC. Connect your camera to your PC using the USB cable. This enables you to upload your video footage to your PC. Picture quality VGA VGA QVGA QVGA QQVGA QQVGA setting 30 fps 15 fps 30 fps 15 fps 30 fps 15 fps 1. Turn the ATC-2K on. 2. Connect the
Inhaltszusammenfassung zur Seite Nr. 14
ATC-2K Website Note: Please use the link below to check for the latest information. 1. Videos will be saved in AVI format. http://www.oregonscientific.com/atc2k/us 2. When the ATC-2K is connected to the PC with an SD card inserted in the camera, the '100COACH' folder will show the files on the SD card. X) Troubleshooting IX) Playing back video footage on There's no display a TV -Are the batteries properly installed? -Do the batteries need replacing? 1. Turn the ATC-2K and TV off. 2. Connect
Inhaltszusammenfassung zur Seite Nr. 15
Troubleshooting (continued) Further Help I can't capture the video footage We make every effort to ensure the accuracy and appropriateness of the -Make sure there is enough space on the internal memory of ATC-2K or the information provided on our products. Although errors can sometimes occur, SD card; the display will tell you how much time there is left for video we believe it is important for us to stand behind our products. We encourage recording. you to contact our Technical Support Team at
Inhaltszusammenfassung zur Seite Nr. 16
Notes
Inhaltszusammenfassung zur Seite Nr. 17
Oregon Scientific, Inc. 19861 SW 95th Avenue Tualatin, OR 97062, USA Hotline: 1-800-853-8883 Website: www.oregonscientific.com This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNING: Changes or modifications to this unit not expressly approved by the party responsible
