Inhaltszusammenfassung zur Seite Nr. 1
E INSTRUCTION MANUAL
9222-2725-11 SY-A402/0402
Inhaltszusammenfassung zur Seite Nr. 2
Before you begin Thank you for purchasing this digital camera. Please take the time to read through this instruction manual so you can enjoy all the features of your new camera. Check the packing list before using this product. If any items are missing, immediately contact your camera dealer. DiMAGE Z2 digital camera Neck strap NS-DG6000 Lens cap LF-242 A Shoe cap SC-1000 SD Memory Card AV cable AVC-400 USB cable USB-500 4 AA alkaline batteries DiMAGE Viewer CD-ROM ArcSoft VideoImpression CD-ROM
Inhaltszusammenfassung zur Seite Nr. 3
For proper and safe use Read and understand all warnings and cautions before using this product. WARNING Using batteries improperly can cause them to leak harmful solutions, overheat, or explode which may damage property or cause personal injury. Do not ignore the following warnings. •Only use the batteries specified in this instruction manual. •Do not install the batteries with the polarity (+/–) reversed. •Do not use batteries which show wear or damage. •Do not expose batteries to fire, high t
Inhaltszusammenfassung zur Seite Nr. 4
• Do not fire the flash directly into the eyes. It may damage eyesight. • Do not fire the flash at vehicle operators. It may cause a distraction or temporary blindness which may lead to an accident. •Do not use the monitor while operating a vehicle or walking. It may result in injury or an accident. •Do not use this product in a humid environment, or operate this product with wet hands. If liquid enters the product, immediately remove the batteries or unplug the AC adapter and discontinue use. T
Inhaltszusammenfassung zur Seite Nr. 5
CAUTION •Do not use or store the product in a hot or humid environment such as the glove compartment or trunk of a car. It may damage the product and batteries which may result in burns or injuries caused by heat, fire, explosion, or leaking battery fluid. • If batteries are leaking, discontinue use of the product. • The lens retracts when the camera is turned off. Touching the lens barrel while it is retracting may cause injury. • The camera temperature rises with extended periods of use. Care
Inhaltszusammenfassung zur Seite Nr. 6
About this manual The basic operation of this camera is covered between pages 12 and 33. This section of the manual covers the camera parts, preparation of the camera for use, and the basic camera operation for recording, viewing, and deleting images. Many of the features of this camera are controlled with menus. The menu navigation sections con- cisely describe how to change menu settings. Descriptions of the settings immediately follow the navigation sections. Names of parts ..................
Inhaltszusammenfassung zur Seite Nr. 7
Advanced recording.............................................................................................................................34 Recording mode display .........................................................................................................34 Macro ......................................................................................................................................35 Program (P) exposure mode ......................................................
Inhaltszusammenfassung zur Seite Nr. 8
Advanced playback..............................................................................................................................70 Playing back movies ...............................................................................................................70 Capturing a movie frame.........................................................................................................70 Navigating the playback-mode menu........................................................
Inhaltszusammenfassung zur Seite Nr. 9
Data-transfer mode..............................................................................................................................97 System requirements ..............................................................................................................97 Connecting the camera to a computer...................................................................................98 Connecting to Windows 98 and 98SE..................................................................
Inhaltszusammenfassung zur Seite Nr. 10
Names of parts * This camera is a sophisticated optical instrument. Care should be taken to keep these surfaces clean. Please read the care and storage instructions in the back of this manual (p. 116). Shutter-release button Flash (p. 26) Diopter-adjustment Speaker dial (p. 17) Strap eyelet (p. 12) Card-slot door (p. 16) AF window* Lens* Microphone Self-timer lamp (p. 47) The USB port and AV-out terminal are located behind the card-slot door. The battery-chamber door (p. 13) and tripod socket a
Inhaltszusammenfassung zur Seite Nr. 11
Flash-mode button (p. 26) Macro button (p. 35) Exposure-mode dial (p. 21, 29, 36 - 40) Accessory shoe (p. 43) Viewfinder* (p. 17) LCD monitor* Zoom lever (p. 20) Controller Access lamp Main switch Mode switch DC terminal Menu button Quick View / Delete button (p. 30, 31) Information button (p. 28, 32) 11
Inhaltszusammenfassung zur Seite Nr. 12
GETTING UP AND RUNNING Attaching the strap and lens cap Always keep the strap around your neck in the event that the camera is accidentally dropped. An optional leather neck strap, NS-DG1000, is also available from your Konica Minolta dealer. Availability varies with region. 2 1 Pass one of the small loops of the lens-cap strap through the eyelet on the lens cap (1). Pass the other loop through the first loop and tighten (2). Pass the end of the neck strap through the lens-cap strap and strap ey
Inhaltszusammenfassung zur Seite Nr. 13
Inserting batteries This digital camera uses four AA-size alkaline or Ni-MH batteries. Do not use other types of AA bat- teries. The camera should be off when replacing batteries. 3 To open the battery-chamber door, slide the lock to the open position (1). 1 Slide the door the the side of the camera (2) to release the safety catch. Lift the door to open (3). 2 Insert the batteries as indicated on the diagram on the inside of the bat- tery-chamber door. Confirm the positive and negative battery
Inhaltszusammenfassung zur Seite Nr. 14
Battery condition indicator This camera is equipped with an automatic battery-condition indicator. When the camera is on, the battery-condition indicator appears on the monitor. If the monitor is blank, the batteries may be exhausted or installed incorrectly. Full-battery indicator - the battery is fully charged. This indicator is displayed for three seconds on the monitor when the camera is turned on. Low-battery indicator - battery power is low. The battery should be replaced as soon as possi
Inhaltszusammenfassung zur Seite Nr. 15
Connecting the optional AC adapter Always turn off the camera before changing between power supplies. The AC Adapter allows the camera to be powered from an electrical household outlet. The AC Adapter is recom- mended when the camera is interfaced with a computer or during periods of heavy use. AC Adapter model AC-1L is for use in North America and Japan, and AC-11 is for use in all other areas. Insert the mini plug of the AC adapter into the DC termi- nal (1). Insert the AC adapter plug into
Inhaltszusammenfassung zur Seite Nr. 16
Changing the memory card An SD Memory Card or MultiMediaCard must be inserted for the camera to operate. If a card has not been inserted, a no-card warning is displayed on the monitor. For more about memory cards see page 118. Always turn off the camera and confirm the access lamp is not lit before removing a memory card; damage and data loss may result. 1 2 3 4 1. Open the card-slot door by sliding the door toward the front of the camera. 2. Insert the memory card all the way into the card slo
Inhaltszusammenfassung zur Seite Nr. 17
Turning on the camera and displays Press the main switch to turn the camera on. Pressing the switch again turns the camera off. Around the main switch is the mode switch. This switch is used to change between the recording and playback modes as well as the selecting the between the monitor and viewfinder display. Recording mode (Viewfinder display) - the camera can record images and the monitor is viewed through the viewfinder. The viewfinder has a built-in diopter. While looking through the vi
Inhaltszusammenfassung zur Seite Nr. 18
Setting the date and time After initially inserting a memory card and batteries, the camera’s clock and calendar must be set. When images are recorded, the image data is saved with the date and time of recording. If the clock and calendar have not been set, a message is 1 displayed for a few seconds each time the camera is turned on. This message is also displayed if the clock and calen- dar reset when the camera is stored without batteries for a long period. Use the left and right keys of the c
Inhaltszusammenfassung zur Seite Nr. 19
Setting the Menu language For customers in certain areas, the menu language may have to be set. Press the menu button (1) to open the menu; the appearance of the menu will depend on the posi- 2 tion of the camera’s controls. Navigating the menu is simple. The up/down and left/right keys of the controller (2) move the cursor and change set- 1 tings on the menu. The central button of the controller selects menu options and sets adjustments. Drive m Image Drive mode Single Use the right key of the
Inhaltszusammenfassung zur Seite Nr. 20
BASIC RECORDING This section covers the basic operation of this camera. Thoroughly familiarize yourself with the operations in this section before moving on to the other sections in the manual. Turn on the camera. Set the mode switch to a recording position. Handling the camera While using the viewfinder or LCD monitor, grip the camera firmly with your right hand while supporting the body with your left. Keep your elbows at your side and your feet shoulder-width apart to hold the camera steadily
