Inhaltszusammenfassung zur Seite Nr. 1
(AB68-00512B)SCC-B1391-01Eng 2005.6.17 4:7 PM ˘`1
DIGITAL COLOR CAMERA
E
SCC-B1391(P)
D
SCC-B1091P
F
User’s Manual
Sp
I
Pl
R
Inhaltszusammenfassung zur Seite Nr. 2
(AB68-00512B)SCC-B1391-01Eng 2005.6.17 4:7 PM ˘ `2 Important Safety Instructions CAUTION This symbol indicates RISK OF ELECTRIC high voltage is present E SHOCK DO NOT OPEN inside. It is dangerous to make any kind of contact with any inside part of this product. This symbol alerts you CAUTION: TO REDUCE THE that important literature RISK OF ELECTRIC SHOCK, concerning operation and DO NOT REMOVE REAR maintenance has been COVER. NO USER SERVICEABLE PARTS INSIDE. included with this product. REFER
Inhaltszusammenfassung zur Seite Nr. 3
(AB68-00512B)SCC-B1391-01Eng 2005.6.17 4:7 PM ˘ `3 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. E 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety p
Inhaltszusammenfassung zur Seite Nr. 4
(AB68-00512B)SCC-B1391-01Eng 2005.6.17 4:7 PM ˘ `4 Contents Chapter 1 Introduction ........................................................ 5 E Chapter 2 Special Features ............................................. 6 Chapter 3 Installation ......................................................... 7 Checking the contents of the package .............. 7 Precautions in Installation and Use ................... 8 Connecting Auto Iris Lens Connector ................ 9 Lens Fixing ................
Inhaltszusammenfassung zur Seite Nr. 5
(AB68-00512B)SCC-B1391-01Eng 2005.6.17 4:7 PM ˘ `5 Chapter 1 Introduction This camera is the high-resolution monitoring camera of 540 TV Lines and can provide the best monitoring function by connecting with the CCTV System. E ❉ In the mechanical fluorescent light environment, if you attach MANUAL IRIS LENS and turn the ELC switch among FUNCTION switches on, color may be rolled. In this case, supply AC power before you turn L/L switch among FUNCTION switches on. (NTSC:60HZ , PAL:50HZ) COLO
Inhaltszusammenfassung zur Seite Nr. 6
(AB68-00512B)SCC-B1391-01Eng 2005.6.17 4:7 PM ˘ `6 Chapter 2 Special Features High Sensitivity It has an up-to-date 1/3" Super-HAD IT CCD for an image of high sensitivity. E Resolution It realizes high resolution resulting from full digital image processing supported by a state-of-art digital signal technology. Superior Back Light Adjustment Function In case the object has a bright illumination or sunlight behind it, this camera adjusts the image shaded by the back light for clear photograp
Inhaltszusammenfassung zur Seite Nr. 7
(AB68-00512B)SCC-B1391-01Eng 2005.6.17 4:7 PM ˘ `7 Chapter 3 Installation This chapter describes what should be checked before installation, how to set the installation environment, and what should be done during installation. Then, it describes how to install the camera and connect the cable in actual circumstances. E Checking the contents of the package Be sure to check if the following items are included in the package. Camera Camera Holder(Mount) User's Manual C Mount Adapter Auto Iris
Inhaltszusammenfassung zur Seite Nr. 8
(AB68-00512B)SCC-B1391-01Eng 2005.6.17 4:7 PM ˘ `8 Precautions in Installation and Use E Do not attempt to disassemble the camera yourself. ➁ Be cautious in handling the camera. Avoid striking or shaking the camera. Be cautious to avoid damage on the camera caused by improper storage or operation. ➂ Do not expose this camera to rain or moisture. Do not operate this camera on a wet place. ➃ Do not use strong or abrasive detergents when cleaning the camera body. Use a dry cloth to clean the c
Inhaltszusammenfassung zur Seite Nr. 9
(AB68-00512B)SCC-B1391-01Eng 2005.6.17 4:7 PM ˘ `9 Connecting Auto Iris Lens Connector Prepare the following Auto Iris Lens Connector supplied with the camera. E Rb Pin3 Pin1 Pin4 Pin2 Connect the cable of the control cable, whose covering is stripped, to the Auto Iris Lens Connector as shown below. Pin No. DC Control Type VIDEO Control Type 1 Damp(-) Power (+12V) 2 Damp(+) N/A 3 Drive(+) VIDEO Signal 4 Drive(-) GROUND 9
Inhaltszusammenfassung zur Seite Nr. 10
(AB68-00512B)SCC-B1391-01Eng 2005.6.17 4:7 PM ˘ `10 Lens Fixing In case of CS lenses Turn the CS lens clockwise until it is fixed as shown as follows. E CS lens In case of C lenses Turn the C-mount adapter clockwise to fix it. Then turn the C lens clockwise until it is fixed as follows. C lens 10
Inhaltszusammenfassung zur Seite Nr. 11
(AB68-00512B)SCC-B1391-01Eng 2005.6.17 4:7 PM ˘ `11 Setting Lens Selection Switch When lens mounting is completed, set the Lens selection Switch on the side of the camera according to the mounted lens type. When the mounted lens E is an Auto Iris Lens of the DC control type, set the Lens Selection Switch to "DC". When the mounted lens is an Auto Iris Lens of the Video control type, set the Lens Selection Switch to "VIDEO". Back Focus Adjustment The camera back focus is adjusted at the plant be
Inhaltszusammenfassung zur Seite Nr. 12
(AB68-00512B)SCC-B1391-01Eng 2005.6.17 4:7 PM ˘ `12 Lenses with zoom function Image an object with high resolution(letticed) at a distance of 3 to 5 m and zoom in the lens as close to TELE as possible. Then adjust the lens E focus bar until the object is seen best. ➁ Zoom in the lens as close to WIDE as possible and adjust the BACK FOCUS adjustment bar until the object is seen best. ➂ Repeat from to ➁ above 2 or 3 times until the focus on the ZOOM TELE side is in line with that on the ZOOM
Inhaltszusammenfassung zur Seite Nr. 13
(AB68-00512B)SCC-B1391-01Eng 2005.6.17 4:7 PM ˘ `13 Connecting Cables and Checking Operation 1 First, connect the connector of the BNC cable to the Video Out terminal E 2 Second, connect the other connector of the BNC cable to the Video In terminal. Video In Terminal of Monitor Rear Surface BNC cable Video Out Terminal 13
Inhaltszusammenfassung zur Seite Nr. 14
(AB68-00512B)SCC-B1391-01Eng 2005.6.17 4:7 PM ˘ `14 3 Third, connect the power cable. AC24V/DC12V Power Input Camera. Connect 2 lines of the power adapter using a screwdriver to the power E IN Terminal of the camera as shown below. ❉ Without the distinction of the polarity, connect to the AC24 or DC12V power source. ➁ AC230V Power Input Camera Connect the power input cord to the AC230V power source. 14
Inhaltszusammenfassung zur Seite Nr. 15
(AB68-00512B)SCC-B1391-01Eng 2005.6.17 4:7 PM ˘ `15 Chapter 4 Part Names and Functions Side View Mount Adapter Fixing E Groove ➂ Auto Iris Lens Connector ➅ Back Focus Control Bar ALC Lens Selection Switch ➃ Auto Iris Lens Control Cable ➁ Camera Lens Mount Adapter Fixing Groove This groove is used for screwing the mount adapter, a part of the bracket where the camera will be installed. ➁ Camera Lens(Option) This lens is installed in the camera. ❉ A camera lens with a stained surface s
Inhaltszusammenfassung zur Seite Nr. 16
(AB68-00512B)SCC-B1391-01Eng 2005.6.17 4:7 PM ˘ `16 Rear View AC24V/DC12V Camera (SCC-B1391(P)) E ➁ ➅ ➂ ➃ AC230V Camera (SCC-1091P) ➁ ➅ ➂ ➃ 16
Inhaltszusammenfassung zur Seite Nr. 17
(AB68-00512B)SCC-B1391-01Eng 2005.6.17 4:7 PM ˘ `17 Power connection port AC24V/DC12V Camera : It is a port connected to the power adaptor cable. AC230V Camera : It is Power cord. E ➁ POWER LED If the power of a camera is supplied normally, the LED is ON. ➂➃ INC and DEC Switch Both switches increase or decrease the profit of RED and BLUE to fix a color temperature as you wish while AWB among the FUNCTION switches is off(USER) and control the vertical synchronous phase while both AWB and
Inhaltszusammenfassung zur Seite Nr. 18
(AB68-00512B)SCC-B1391-01Eng 2005.6.17 4:7 PM ˘ `18 1) SW1(L/L) : Set to OFF, the camera activates the internal synchronization mode and set to ON, the power synchronization mode. If you connect multi cameras to the sequential switcher to enter the automatic conversion mode, the screen will bounce every screen while the camera stays in E INT(internal synchronization). Such bouncing phenomena may be cleared and screen conversion becomes smooth by setting the L/L switch to ON and using the IN
Inhaltszusammenfassung zur Seite Nr. 19
(AB68-00512B)SCC-B1391-01Eng 2005.6.17 4:7 PM ˘ `19 ➅ DC IRIS Level Controller When the ALC lens selection switch is set to DC, use the same control bar as the driver to control the IRIS level. E Video Output Port This port shall be connected to the monitor video input port or equivalent. You may output camera video signals through this port. 19
Inhaltszusammenfassung zur Seite Nr. 20
(AB68-00512B)SCC-B1391-01Eng 2005.6.17 4:7 PM ˘ `20 Product Specification SCC-B1391P/B1091P ITEM Contents E Product Type CCTV Camera Broadcasting System PAL STANDARD SYSTEM CCD 1/3 Super-HAD CCD Effective Pixels 752(H) x 582(V) Scanning Type 625 Line, 2:1 Interlace INTERNAL : 15,625Hz(H) 50 Hz(V) Frequency LINE LOCK : 15,625Hz(H) 50 Hz(V) INTERNAL Sync Type LINE LOCK(When AC Power source is used) Resolution(H) 540 TV Lines S/N Ratio About 50dB Minimum Illumination 0.3 Lux of Object 20
