Inhaltszusammenfassung zur Seite Nr. 1
4-469-371-11(1)
Interchangeable Lens Preparing the camera
Digital Camera
Mastering the basic
operation
Using the recording
functions
Instruction Manual
Using the playback
functions
E-mount
Checking the functions
available
Importing images to the
computer
Adding functions to the
camera
Others
NEX-5T
Inhaltszusammenfassung zur Seite Nr. 2
English Owner’s Record The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call your Sony dealer regarding this product. Model No. NEX-5T Serial No. ______________________________ Model No. AC-UB10C/AC-UB10D Serial No. ______________________________ WARNING To reduce fire or shock hazard, do not expose the unit to rain or moisture. IMPORTANT SAFETY INSTRUCTIONS -SAVE THESE INSTRUCTIONS DANGER -TO RED
Inhaltszusammenfassung zur Seite Nr. 3
� Do not incinerate or dispose of in fire. � Do not handle damaged or leaking lithium ion batteries. � Be sure to charge the battery pack using a genuine Sony battery charger or a device that can charge the battery pack. � Keep the battery pack out of the reach of small children. � Keep the battery pack dry. � Replace only with the same or equivalent type recommended by Sony. � Dispose of used battery packs promptly as described in the instructions. [ AC Adaptor Use the nearby wall outlet (wall
Inhaltszusammenfassung zur Seite Nr. 4
For Customers in the U.S.A. UL is an internationally recognized safety organization. The UL Mark on the product means it has been UL Listed. If you have any questions about this product, you may call: Sony Customer Information Center 1-800-222-SONY (7669) The number below is for the FCC related matters only. [ Regulatory Information Declaration of Conformity Trade Name: SONY Model No.: NEX-5T Responsible Party: Sony Electronics Inc. Address: 16530 Via Esprillo, San Diego, CA 92127 U.S.A. Telepho
Inhaltszusammenfassung zur Seite Nr. 5
The supplied interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules. For Customers in Canada This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. For Customers i
Inhaltszusammenfassung zur Seite Nr. 6
[ Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences
Inhaltszusammenfassung zur Seite Nr. 7
Table of contents Preparing the camera Checking the supplied items ..............................................9 Identifying parts ................................................................10 Charging the battery pack ................................................14 Attaching/removing the lens .............................................19 Inserting a memory card (sold separately) .......................21 Attaching the flash ...........................................................
Inhaltszusammenfassung zur Seite Nr. 8
Checking the functions available Menu list ........................................................................... 55 Functions available for each shooting mode ................... 66 Flash modes available...................................................... 67 Importing images to the computer Installing the software....................................................... 68 What you can do with the supplied software ................... 70 Adding functions to the camera Adding functions to t
Inhaltszusammenfassung zur Seite Nr. 9
Preparing the camera Preparing the camera Checking the supplied items First check the model name of your camera (page 8). The accessories supplied differ depending on the model. The number in parentheses indicates the quantity. � Flash HVL-F7S (1)/Flash case (1) x Supplied with all models � Camera (1) � Power cord (mains lead) (1)* (not supplied in the U.S.A. and Canada) �CD-ROM (1) – Application Software for α camera – α Handbook * Multiple power cords may be � Instruction Manual (This manu
Inhaltszusammenfassung zur Seite Nr. 10
Preparing the camera Identifying parts See the pages in parentheses for details on operation for the parts. C Fn (Function) button (52) D (N mark) � This mark indicates the touch point for connecting the camera and an NFC-enabled Smartphone. For details on the location of the N mark on your Smartphone, refer to the operating instructions of the Smartphone. When the lens is removed � NFC (Near Field A Shutter button (27) Communication) is an B Hook for shoulder strap international standar
Inhaltszusammenfassung zur Seite Nr. 11
Preparing the camera 1) 4) Accessories for the Smart Accessory Terminal can also be � You can adjust the LCD screen to attached. an easily viewable angle and shoot You cannot use the [Self-portrait from any position. Self-timer] function when a flash � Tilt the LCD screen upward about HVL-F7S (supplied) or accessories 180 degrees when you take a self- are attached to the Smart Accessory portrait. The 3-second delay self- Terminal 2. timer is automatically selected in 2) Do not cover this pa
Inhaltszusammenfassung zur Seite Nr. 12
Preparing the camera F Tripod socket hole � Use a tripod with a screw length of less than 5.5 mm (7/32 inch). You will be unable to firmly secure the camera to tripods using screws longer than 5.5 mm (7/32 inch), and may damage the camera. G Speaker x Flash HVL-F7S A Battery/memory card cover (14, 21) B Access lamp (22) C Memory card insertion slot (21) D Battery compartment (14) E Connection plate cover Use this when using an AC-PW20 A Screw AC Adaptor (sold separately). 1) B Flash Inse
Inhaltszusammenfassung zur Seite Nr. 13
Preparing the camera x Lens E55 – 210 mm F4.5-6.3 OSS (supplied with NEX-5TY) See page 96 on the specifications of the lenses. E PZ 16 – 50 mm F3.5-5.6 OSS (supplied with NEX-5TL/NEX-5TY) A Zooming/Focusing ring A Focusing ring B Zooming lever B Zooming ring C Mounting index 1) C Focal-length scale D Lens contacts D Focal-length index 1) 1) Do not touch this part directly. E Lens contacts F Mounting index 1) Do not touch this part directly. GB 13
Inhaltszusammenfassung zur Seite Nr. 14
Preparing the camera Charging the battery pack When using the camera for the first time, be sure to charge the NP-FW50 “InfoLITHIUM” battery pack (supplied). The “InfoLITHIUM” battery pack can be charged even when it has not been fully depleted. The battery pack can also be used when it has not been fully charged. The charged battery pack is discharged little by little, even when you do not use it. To avoid missing an opportunity to shoot, charge the battery pack again before you shoot. Set
Inhaltszusammenfassung zur Seite Nr. 15
Preparing the camera Close the cover. 4 Connect the camera to the AC Adaptor (supplied), using 5 the micro USB cable (supplied). Connect the AC Adaptor to the wall outlet (wall socket). � When using the USB cable, insert and remove it in a straight line and do not exert undue force. � Even when fully inserted into the camera, the metal portion of the USB cable (supplied) will be visible. For customers in the USA and Canada Power cord Charge lamp (Mains lead) Lit: Charging Off: Charging fi
Inhaltszusammenfassung zur Seite Nr. 16
Preparing the camera Notes � If the charge lamp on the camera flashes when the AC Adaptor is connected to the wall outlet (wall socket), this indicates that charging is temporarily stopped because the temperature is outside the recommended range. When the temperature gets back within the appropriate range, the charging resumes. We recommend charging the battery pack in an ambient temperature of between 10 °C and 30 °C (50 ºF and 86 ºF). � The charge lamp may flash quickly when the battery p
Inhaltszusammenfassung zur Seite Nr. 17
Preparing the camera x Charging by connecting to a computer The battery pack can be charged by connecting the camera to a computer using a micro USB cable. Notes � Note the following points when charging via a computer: – If the camera is connected to a laptop computer that is not connected to a power source, the laptop battery level decreases. Do not leave the camera connected to a computer for an extended period of time. – Do not turn on/off or restart the computer, or wake the computer to
Inhaltszusammenfassung zur Seite Nr. 18
Preparing the camera x Checking the remaining battery level Check the level with the following indicators and percent figures displayed on the LCD screen. “Battery exhausted.” Battery level You cannot High Low shoot any more image. Notes � In some circumstances, the displayed battery level may differ from the actual battery level. z What is an “InfoLITHIUM” battery pack? An “InfoLITHIUM” battery pack is a lithium-ion battery pack that has functions for exchanging information related to op
Inhaltszusammenfassung zur Seite Nr. 19
Preparing the camera Attaching/removing the lens Set the power switch of the camera to OFF before you attach or remove the lens. If the cap or the packaging lid 1 is attached, remove it from the camera or the lens. � Quickly change the lens somewhere away from dusty locations so as to keep dust or debris from getting inside the camera. Mount the lens by aligning the 2 white index marks on the lens and the camera. � Hold the camera’s face downward to prevent the dust from entering into
Inhaltszusammenfassung zur Seite Nr. 20
Preparing the camera x Removing the lens Press the lens release button 1 all the way in and turn the lens counterclockwise until it stops. Lens release button Notes � If dust or debris gets inside the camera while you are changing the lens and adheres to the surface of the image sensor (the part that converts the light source to a digital signal), it may appear as dark spots on the image, depending on the shooting environment. The camera vibrates slightly when it is turned off, due to the
