Inhaltszusammenfassung zur Seite Nr. 1
gg
TOSHIBA
WLT66
Series
Owner's manual
Inhaltszusammenfassung zur Seite Nr. 2
Remember… For television operation queries, please ring the helpline… ? gg Contents SETTING UP Safety precautions – Some do’s and don’ts for you to be aware of 3 Installation and important information 4 The remote control – an at-a-glance guide 5 Connecting external equipment – a guide to connecting external equipment to the back of the television 6 Connecting a computer – connecting a computer to the back of the television 7 Controls and input connections – switching on the television, standby,
Inhaltszusammenfassung zur Seite Nr. 3
gg Safety Precautions This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products and some points may not apply to the goods you have just purchased. DO NOT REMOVE ANY FIXED COVERS AS THIS Air Circulation WILL EXPOSE DANGERO
Inhaltszusammenfassung zur Seite Nr. 4
gg Installation and important information Where to install Locate the television away from direct sunlight and strong lights, soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight Sturdy tie (as short as possible) falling on the screen. Place on a sturdy platform, the mounting surface should be flat and steady. It should then be secured to the wall with a Clip sturdy tie using the clip on the back of the stand, or secured to the platfor
Inhaltszusammenfassung zur Seite Nr. 5
gg The remote control UP Simple at-a-glance reference of your remote control. To mute the sound For On/Standby mode Number buttons To select input from external sources To return to the previous programme To switch between TV, Radio and Favourite To display the digital on-screen programmes when in digital mode Programme Guide On-screen Menus To exit Menus When using menus the arrows move the cursor on the screen up, down, left or right. OK to confirm your selection To change programme positions
Inhaltszusammenfassung zur Seite Nr. 6
gg Connecting external equipment Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket. COMPONENT VIDEO (EXT3) SCART 2 (EXT2) CABLE HOLDER SCART 1 (EXT1) FIXING STRAP MEDIA REC. decoder* TV HDMI™ INPUT SOCKETS COMMON INTERFACE The Common Interface is for a Conditional Access media recorder IN/OUT SAT Module (CAM). There is access for two CAMs. Contact a service provider. HDMI™ (High-Definition Multimedia Inter
Inhaltszusammenfassung zur Seite Nr. 7
gg Connecting a computer Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket. the back of your television Audio cable for PC to television connection (not supplied) Computer Mini D-sub 15 pin connector RGB PC cable (not supplied) Conversion adaptor if required (not supplied) Connect the PC cable from the computer to the PC When PC input mode is selected some of the terminal on the back of the television. te
Inhaltszusammenfassung zur Seite Nr. 8
☛ Input 3 (side) will take priority over EXT3 (back) if both connections are used at the same time. gg Controls and input connections A wide variety of external equipment can be connected to the input sockets on the side of the television. Whilst all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions. INPUT 3 (EXT3) GREEN LED – Active standby RED LED – Power on Standby To use the options pres
Inhaltszusammenfassung zur Seite Nr. 9
gg Tuning the television for the first time Before switching on the television put your decoder and media recorder to Standby if they are connected and ensure the aerial is connected. To set up the television use the buttons on the remote control as detailed on page 5. When the search is complete the television will Press the power-on button, the Welcome screen 1 will appear. This screen will appear the first time automatically select programme one. that the television is switched on and each
Inhaltszusammenfassung zur Seite Nr. 10
gg Digital auto tuning NOTE: As new services are broadcast it will be necessary to re-tune the television in order to view them. You must allow the television to complete Auto tuning the search. When the search is complete the Auto tuning Auto tuning will completely re-tune screen will display the total number of services the television and can be used to up date the channel list. found. It is recommended that Auto tuning is run periodically to ensure that all new services are AUTO TUNING ad
Inhaltszusammenfassung zur Seite Nr. 11
gg Digital programme sorting, manual tuning NOTE: When the television is switched off the mode being viewed at the time will automatically be selected when the television is switched back on. P Use Q or to move through the list to your 4 Programme sorting preferred position. As you do so the other stations will move to make room. The station order may be changed to suit 1 Press to store your move. Repeat as necessary, S 5 personal preference. Press MENU, the SETUP then press EXIT. MENU will app
Inhaltszusammenfassung zur Seite Nr. 12
gg Tuning Analogue mode for the first time The Quick Setup feature will tune all analogue channels currently available in the area. To put the television into ATV mode press and hold then use P orQ to highlight ATV. Press OK to select. B Select ATV mode. The Quick Setup screen will P Use Q or to move through the list to select a 1 7 appear. programme then press OK to view. The station order may be changed using the Quick Setup Manual tuning screen (see the analogue Select your language. ‘Sortin
Inhaltszusammenfassung zur Seite Nr. 13
Different Channel numbers may be displayed gg Analogue manual tune The television can be tuned-in manually using Manual tuning. For example: if the television cannot be connected to a media recorder/decoder with a SCART lead or to tune-in a station on another System. Use and to move across the screen and select any of these Manual Tune options. S R Programme Programme System Colour Channel Search Manual fine Station system skip tuning Programme: The number to be pressed on the remote control. S
Inhaltszusammenfassung zur Seite Nr. 14
gg Analogue manual tune continued, Auto tune When your media recorder signal is found, press 8 Using Auto tuning P to move along to Station. With , Q, and R S put in the required characters, e.g. VCR. R To set up the television using Auto tuning, press 1 MENU and use or to select the SET UP menu. Manual tuning S R Station 0 I A C 60 0 V C R OK Store MENU EXIT Back Watch TV SET UP 1/2 Language English Press OK to store.
Inhaltszusammenfassung zur Seite Nr. 15
gg Analogue programme skip, sorting programme positions Sorting programme positions Programme skip To prevent certain programmes from being viewed, the Channels may be moved and stored on the programme programme position can be skipped. The remote control position of your choice. must be removed as the channels will still be available using the number buttons. Programmes can then be watched as Select Manual tuning from the SET UP menu. normal using the controls on the television, but the telev
Inhaltszusammenfassung zur Seite Nr. 16
gg General controls, stereo/bilingual transmissions, time display, sound controls Selecting programme positions Bass, Treble and Balance To select a programme position use the numbered The sound controls are accessible in digital and buttons on the remote control. analogue modes, as are most of the televisions features. Programme positions can also be selected using Pf and Q In digital mode, press MENU and using 1 P . e highlight TV setup then press OK. To revert to the previous programme posi
Inhaltszusammenfassung zur Seite Nr. 17
gg Sound controls continued, SRS WOW™ sound ® effects, dual, stable sound Press Q to highlight SRS 3D and using 3 Bass boost or select between On or Off. S R Then press Q to highlight FOCUS and press Bass boost enhances the depth of the sound. The 4 or to select between On or Off. S R difference will only be noticeable on sound with a strong bass. Highlight TruBass and use or to select Off, S R 5 Low or High to suit your preference. In the SOUND menu press Q to highlight Bass 1 boost. Use or
Inhaltszusammenfassung zur Seite Nr. 18
gg Widescreen viewing Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. Press the button repeatedly to select between Exact Scan, Wide, Super Live 2, Cinema 2, 4:3, { Super Live 1, Cinema 1, Subtitle and 14:9. SUPER LIVE 1 This setting will enlarge a 4:3 image to fit the screen by stretching the image horizontally and vertically, holding the correct proportions at the centre of the image. Some distortion may occur. SUPER LIVE 2 If a ‘side pane
Inhaltszusammenfassung zur Seite Nr. 19
gg Widescreen viewing continued Use this setting when watching a 14:9 14:9 broadcast. Use this setting when watching a widescreen DVD, widescreen video tape or a 16:9 broadcast WIDE (when available). Due to the range of widescreen formats (16:9, 14:9, 20:9 etc.) black bars may be visible on the top and bottom of the screen. Use this setting to view a true 4:3 4:3 broadcast. 42 MODEL ONLY Use this setting when watching a 1080i source, it will display the image EXACT SCAN as transmitted without
Inhaltszusammenfassung zur Seite Nr. 20
gg Picture controls Most of the picture controls and functions are available in both digital and analogue modes. To access the the required menus when in digital mode: press MENU and using Q select TV setup, press OK then or S R to select the desired menu. PLEASE NOTE: features not available in digital mode will be greyed out. To access the required menus when in analogue mode: press MENU and use or to select the desired menu. S R Picture position – analogue only Back light The picture positio
