Inhaltszusammenfassung zur Seite Nr. 1
TXN2734F / TXN2434F / TXN2034F
TXN2036F / TXN2730F / TXN2030F
TXN2726
COLOR TELEVISION
.............
Owner’s
Instructions
Printed in Mexico
AA68-02821A (ENG)
...................................................................................................................
Inhaltszusammenfassung zur Seite Nr. 2
Warning! Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product. This symbol alerts you that important literature concerning operation and maintenance has been included with this product
Inhaltszusammenfassung zur Seite Nr. 3
Thank You for Choosing Samsung Thank you for choosing Samsung! Your new Samsung TV receiver represents the latest in television technology. It has easy-to-use, on-screen menus and closed-captioning capabilities, making this TV one of the best products in its class. This product will provide convenient, dependable service and enjoyment for years to come. Important Safety Information To reduce the risk of fire, electrical shock, and other injuries, keep these safety precautions in mind when insta
Inhaltszusammenfassung zur Seite Nr. 4
• Protect the power cord. Power supply cords should be routed so that they will not be walked on or pinched by items placed on or against them. Pay particular attention to cord placement at plugs, convenience receptacles, and at the point where they exit from the unit. • Unplug the TV receiver from the wall outlet and disconnect the antenna or cable system dur- ing a lightning storm or when left unattended and unused for long periods of time. This will prevent damage to the unit due to lightnin
Inhaltszusammenfassung zur Seite Nr. 5
1) Read these instructions. DOUBLE INSULATED - When servicing 2) Keep these instructions. use only identical replacement parts. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat. 9) Do not def
Inhaltszusammenfassung zur Seite Nr. 6
CONTENTS Chapter 1: Your New TV . . . . . . . . . . . . . . .1.1 List of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 Familiarizing Yourself with The TV. . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 Front Panel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 Side Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3 Rear Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 7
CONTENTS Chapter 4: Special Features . . . . . . . . . . . . 4.1 Customizing Your Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1 Setting Up Your Remote Control to Operate Your VCR or DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1 Setting Up Your Remote Control to Operate Your Cable Box. . 4.3 Fine Tuning Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.4 Changing the Screen Size . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 8
Chapter One YOUR NEW TV List of Features Your TV was designed with the latest technology. This TV is a high-performance unit that includes the following special features: • Easy-to-use remote control • Easy-to-use on-screen menu system • Automatic timer to turn the TV on and off • Adjustable picture and sound settings that can be stored in the TV’s memory • Automatic channel tuning for up to 181 channels • A special filter to reduce or eliminate reception problems • Fine tuning control for the
Inhaltszusammenfassung zur Seite Nr. 9
YOUR NEW TV Familiarizing Yourself with The TV Front Panel Buttons The buttons on the front panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control. TXN2734F / TXN2434F / TXN2034F TXN2036F TXN2730F / TXN2030F TXN2726 Œ MENU ¨ Remote Control Sensor Press to see an on-screen menu of your TV's fea- Aim the remote control towards this spot on the tures. TV. ´ VOL – , + ˆ STAND BY indicator Lights up when you turn the po
Inhaltszusammenfassung zur Seite Nr. 10
YOUR NEW TV Side Panel Jacks You can use the Side panel jacks to connect an A/V component that is used only occa- sionally, such as a camcorder or video game. (For information on connecting equipment, see pages 2.1 – 2.8.) TXN2034F TXN2734F TXN2434F / TXN2730F TXN2030F / TXN2726 TXN2036F Œ AUDIO INPUTS ˇ S-VIDEO INPUT (Option) Audio signals from VCRs, DVD players and Connect to an S-VHS VCR or DVD player. similar devices. ¨ HEADPHONE ´ VIDEO INPUT Connect a set of external headphones to this V
Inhaltszusammenfassung zur Seite Nr. 11
YOUR NEW TV Rear Panel Jacks Use the rear panel jacks to connect an A/V component that will be connected continuously, such as a VCR or a DVD player. Because there are two sets of input jacks, you can connect two different A/V components (i.e., a VCR and a DVD, 2 VCRs, etc.) For more information on connecting equipment, see pages 2.1 – 2.8. Œ AUDIO-VIDEO MONITOR ˆ S-VIDEO INPUT (Option) OUTPUTS Connect to an S-VHS VCR or DVD player. These audio-video signals are identical to A/V signals being
Inhaltszusammenfassung zur Seite Nr. 12
YOUR NEW TV Remote Control You can use the remote control up to about 23 feet from the TV. When using the remote, always point it directly at the TV. You can also use your remote control to operate your VCR, DVD and cable box. See page 4.1 for details. Œ POWER ˝ TV Turns the TV on and off. Press to use your remote control to operate your TV. ´ Number buttons Press to select channels directly VCR on the TV. Press to use your remote control to operate your VCR. +100 Press to select channels over 1
Inhaltszusammenfassung zur Seite Nr. 13
YOUR NEW TV Remote Control ¯ VCR Controls ˘ PIP Controls (Not available) • REW (Rewind) Press to rewind a tape in your SWAP VCR. Exchanges the video signal that is currently displayed on the main • STOP screen with the signal in the PIP Press this button to stop a tape window. during play, record, rewind or fast forward. If the button is pressed during Full-Automatic TV/VIDEO play, the function will be can- Press to select one of the available celled. signal sources for the PIP window. • PLAY P
Inhaltszusammenfassung zur Seite Nr. 14
YOUR NEW TV Remote Control Œ POWER Ø TV/VIDEO Turns the TV on and off. Press to display all of the available video sources (i.e., ´ Number buttons Antenna/cable, VCR Press to select channels directly on the TV. ∏ SURF Press the SURF button to automati- ˇ +100 cally return to a preferred channel Press to select channels over 100. after a user-preset time delay. For example, to select channel 121, press “+100,” then ” SLEEP press “2” and “1.” Press to select a preset time inter- val for automati
Inhaltszusammenfassung zur Seite Nr. 15
2 Chapter Two INSTALLATION Connecting VHF and UHF Antennas If your antenna has a set of leads that look like this, see “Antennas with 300-ohm Flat Twin Leads” below. If your antenna has one lead that looks like this, see “Antennas with 75-ohm Round Leads” on page 2.2. If you have two antennas, see “Separate VHF and UHF Antennas” on page 2.2. Antennas with 300-ohm Flat Twin Leads If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has 300-ohm twin flat leads,
Inhaltszusammenfassung zur Seite Nr. 16
INSTALLATION Antennas with 75-ohm Round Leads 1 Plug the antenna lead into the VHF/UHF terminal on the bottom of the back panel. Separate VHF and UHF Antennas If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops). 1 Connect both antenna leads to the combiner. 2 Plug the combiner into the VHF/UHF terminal on
Inhaltszusammenfassung zur Seite Nr. 17
INSTALLATION Connecting to a Cable Box that Descrambles All Channels This terminal might be labeled 1 “ANT OUT”, “VHF OUT” or simply, Find the cable that is con- “OUT”. nected to the ANTENNA OUT terminal on your cable box. 2 Connect the other end of this cable to the VHF/UHF antenna terminal on the back of the TV. Connecting to a Cable Box that Descrambles Some Channels If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a tw
Inhaltszusammenfassung zur Seite Nr. 18
INSTALLATION 4 Connect a coaxial cable between the ANTENNA OUT terminal on the cable box and the B–IN terminal on the A/B switch. 5 Connect another cable between the other OUT terminal on the splitter and the A–IN terminal on the RF (A/B) switch. 6 Connect the last coaxial cable between the OUT terminal on the RF (A/B) switch and the VHF/UHF terminal on the rear of the TV. After you’ve made this connection, set the A/B switch to the “A” position for normal view- ing. Set the A/B switch to the “
Inhaltszusammenfassung zur Seite Nr. 19
INSTALLATION 3 Connect a coaxial cable between the ANTENNA OUT terminal on the VCR and the antenna terminal on the TV. A coaxial cable is usually included with a VCR. (If not, check your local electronics store). 4 Connect a set of audio cables between the AUDIO OUT jacks on the VCR and the AUDIO jacks on the TV. 5 Connect a video cable between the VIDEO OUT jack on the VCR and the VIDEO jack on the TV. Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape. Note: Th
Inhaltszusammenfassung zur Seite Nr. 20
INSTALLATION Connecting an S-VHS VCR (Option) Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR. (This connection delivers a better picture as compared to a standard VHS VCR.) 1 To begin, follow steps 1–3 in the previous section to connect the antenna or cable to your VCR and your TV. 2 Connect a set of audio cables between the AUDIO OUT jacks on the VCR and the 2 AUDIO INPUT jacks on the TV. Make sure the jacks you are using are underneath the number “2”. 3 Connect an S
