Inhaltszusammenfassung zur Seite Nr. 1
TABLE OF CONTENTS
Introduction 2
Safety Instructions 3
Location of Controls 4
Remote Control Use 5
Antenna Connection 6
Cable TV(CATV) Connection 7
Video/Audio Connections 8
Basic Operation 10
Basic Menu Operation 11
Set-Up 13
Antenna Selection
Auto Channel Programming
Manual Memory (Channel Add/Delete)
Fine Tuning
LNA Effects
Picture Adjustment 18
P.STD Button
Custom(Manual) Adjustment
Sound Adjustment 20
Using S.STD Button
Using On-Screen Menu
Equalizer
Headphones
Surround Sound
MTS
Clock/Ti
Inhaltszusammenfassung zur Seite Nr. 2
INTRODUCTION SAFETY INSTRUCTIONS TM Congratulations on your purchase of this Sanyo MTS stereo TruFlat screen television. TM Sanyo's TruFlat screen offers these important benefits... ANTENNA TM Distortion-Free Images - Sanyo TruFlat recreates the theater screen experience by Unless your TV is connected to a Cable TV system or to a centralized antenna system, a good eliminating distortion that a curved conventional TV screen produces. outdoor color TV antenna is recommended for the best perfor
Inhaltszusammenfassung zur Seite Nr. 3
LOCATION OF CONTROLS REMOTE CONTROL USE FRONT Point to remote control sensor of the TV set. The maximum operable distance is approximately 20 feet from the remote control sensor, and not more than 30 to either side of center. The operation of the remote control is most effective when there is nothing between it and the remote control sensor. The duration of the batteries is approximately 6 months to 1 year. Replace the batteries when the remote operation becomes unstable. BATTERY INSTALLATION T
Inhaltszusammenfassung zur Seite Nr. 4
ANTENNA CONNECTION CABLE TV (CATV) CONNECTION ANTENNA A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75 ohm coaxial cable to the set, screw the 75-ohm cable to the The antenna requirements for good color television reception are more important than those COAXIAL CABLE CONNECTOR. for black & white television reception. For this reason, a good quality outdoor antenna is Some cable TV companies offer "premium pay channels". Since the signals of these pr
Inhaltszusammenfassung zur Seite Nr. 5
VIDEO/AUDIO CONNECTIONS Prior to making any connections to your TV set, be sure to turn the POWER off. For a more detailed understanding of each connection, it is recommended that you read the To view a connected video source, press the TV/VIDEO button on the side of the cabinet or instruction manual for each connected component. VIDEO button on the remote control. If you use video or audio equipment placed near the TV, picture and/or sound may become TV S-VHS 1 VIDEO 2 VIDEO 3 YUV distorted du
Inhaltszusammenfassung zur Seite Nr. 6
BASIC OPERATION BASIC MENU OPERATION 1.Press POWER button to turn the TV on. FIRST PREPARATIONS 2.Press MENU button and move the cursor to "SETUP" option and press VOL + button. Connect either Antenna or Cable TV according to "ANTENNA CONNECTION" The "SET UP" menu is displayed. instructions on page 6. Insert batteries into the remote control unit according to "REMOTE CONTROL USE" instructions on page 5. MENU SETUP Insert the AC Cord Plug into a standard 120V, 60Hz polarized AC outlet. PIC
Inhaltszusammenfassung zur Seite Nr. 7
BASIC MENU OPERATION SET-UP You can execute every operation by pressing CH / buttons and VOL +/- buttons ANTENNA SELECTION alternately. In this mode, you can change the antenna mode between "TV" (If you use a VHF/UHF If you learn one menu, you can easily operate other functions by viewing pictures. antenna) and " CATV " (If you have cable connection.) 1.Pressing these buttons alternately makes every operation easy. 1. Press MENU button, move the cursor to "SETUP" option and press VOL + button.
Inhaltszusammenfassung zur Seite Nr. 8
SET-UP SET-UP AUTO CHANNEL PROGRAMMING MANUAL MEMORY (channel add/delete) This function allows the channels to be memorized automatically to match the TV broadcasts 1. TO ADD A CHANNEL and cable channels in your area. If you want to add a channel not store during AUTO PROGRAM to the memorized channel follow these steps. 1. Press MENU button, move the cursor to "SETUP" option and press VOL + button. The "SET UP" menu is displayed. Select a channel you want to view by using the number button
Inhaltszusammenfassung zur Seite Nr. 9
SET-UP SET-UP FINE TUNING LNA (Low Noise Amplifier) EFFECTS Set LNA ON to increase a weak incoming signal. However, if you are located in a strong signal If the reception is clear, you do not have to fine-tune the channel, because this is done automatically during auto program and manual memory. area, such as nearby a broadcasting station, and if the picture is distorted, set LNA OFF. If, however, the signal is weak or distorted, you may have to fine-tune the channel manually. 1. Press CH / butt
Inhaltszusammenfassung zur Seite Nr. 10
PICTURE ADJUSTMENT PICTURE ADJUSTMENT CUSTOM (MANUAL) ADJUSTMENT P.STD (Picture Standard) BUTTON You can sequentially select and adjust one of five picture properties. By pressing the P.STD button on the remote control, you can sequentially select one of four Contrast, Brightness, Sharpness , Color, or Tint. preset picture standards. (1) CUSTOM mode MENU Press the MENU button. Move the 1 1 1 1 cursor to PICTURE by pressing the CH PICTURE (2) STANDARD mode / buttons and press the VOL + SOUND bu
Inhaltszusammenfassung zur Seite Nr. 11
SOUND ADJUSTMENT SOUND ADJUSTMENT USING ON-SCREEN MENU USING S.STD BUTTON You can also select a sound setting by using the on-screen menu. There is a choice of five audio settings. By pressing the S.STD button, the five settings can be viewed in the sequence illustrated. MENU 1. Press S.STD button. 1 1 1 1 Press the MENU button. Move the Whenever this button is pressed, the mode will change as follows. PICTURE cursor to SOUND by pressing the CH / SOUND buttons and press the VOL + button. CUSTOM
Inhaltszusammenfassung zur Seite Nr. 12
SOUND ADJUSTMENT SOUND ADJUSTMENT EQUALIZER HEADPHONES You can adjust five frequency ranges to your preference. Follow these instructions to select the audio source (main screen or PIP channel) that you want to receive through the headphones. If you want to listen to sound from the PIP, make sure that sound from the PIP is being received. Press the MENU button. Move the MENU 1 1 1 1 1 1 1 1 PIP cursor to SOUND by pressing the CH / TV 2 PICTURE buttons and press the VOL + button. SOUND Press PIP
Inhaltszusammenfassung zur Seite Nr. 13
SOUND ADJUSTMENT SOUND ADJUSTMENT SURROUND SOUND HEADPHONE 4 4 4 4 Move the cursor to SELECT by pressing SELECT : MAIN SOUND MENU VOL+ button. Each time you press, the VOLUME : 30 audio source changes between main picture and PIP. Move the cursor to SOUND by pressing MENU 1 1 1 1 the CH / buttons and press the PICTURE VOL + button. SOUND : SEL. + : SET :PREV. TIME SETUP FUNCTION LANGUAGE : ENGLISH HEADPHONE 5 5 5 5 : SEL. + : ENTER :EXIT SELECT : MAIN Move the cursor to VOLUME and press V
Inhaltszusammenfassung zur Seite Nr. 14
SOUND ADJUSTMENT SOUND ADJUSTMENT MTS MTS USING MTS BUTTON : USING SOUND MENU : Your TV set incorporates an MTS (Multichannel Television Sound) decoder to receive stereo broadcasts and any accompanying SAP (Second Audio Program) such as another language Press the MENU button. Move the sound track). MENU 1 1 1 1 cursor to SOUND by pressing the CH PICTURE 1. Press the MTS button / buttons and press the VOL + SOUND button. Depending on the audio signal type of the currently receiving broadcas
Inhaltszusammenfassung zur Seite Nr. 15
CLOCK/TIMER CLOCK/TIMER CLOCK ON/OFF TIMER You can set the television’s clock so that the current time will be displayed when you press the The ON/OFF timer lets you use alarm and automatic off functions. MENU button on the remote control. You must set the current time before you can set the automatic On/Off timer. Press MENU button. MENU 1 1 1 1 The "MENU " is displayed on the PICTURE screen. SOUND Press MENU button and move to MENU 1 1 1 1 TIME "TIME "option by using CH / PICTURE SETUP button
Inhaltszusammenfassung zur Seite Nr. 16
CLOCK/TIMER CLOCK/TIMER ON TIME CHANNEL NUMBER 4 4 4 4 You can select the channel on which the TV turns on as programmed by ON-TIMER. TIME Move the cursor to ON TIME by using CH This function will not work if the TIMER is set to OFF or the current time has not been set. CLOCK : AM 06:00 / buttons and press the VOL + / - TIMER : ON buttons to set the time. (Refer to page 28) TIME ON TIME : AM 07:30 OFF TIME : AM 12:00 CLOCK : AM 06:00 1) Move cursor to ON CHANNEL and ON CHANNEL : TV 2 TIMER :
Inhaltszusammenfassung zur Seite Nr. 17
OTHER FUNCTIONS OTHER FUNCTIONS BLUE BACKGROUND CCD : When there is no picture signal or the signal is weak, the screen reverts to a solid blue color. This TV set incorporates a CCD (Closed Caption Decoder) to enable viewing closed captions and TEXT broadcasts. FUNCTION FUNCTION Closed caption and TEXT each has 2 channels (CH1 & CH2). Closed caption and TEXT information can only be viewed if they are being broadcast by a BLUE BACK : OFF BLUE BACK : ON television station, or contained in a vid
Inhaltszusammenfassung zur Seite Nr. 18
PICTURE-IN-PICTURE (PIP) AVM-32F9 ONLY PICTURE-IN-PICTURE (PIP) AVM-32F9 ONLY In this mode, you can enjoy viewing two programs at the same time. PIP STILL NOTE Your TV set must be connected to a VCR for PIP to function. Press STILL to freeze-frame the picture. Press STILL again to resume normal PIP screen. PIP PICTURE STILL MAIN Press PIP on the remote control. When it is ON, the PIP screen appears in the lower right corner. Press PIP again to clear the PIP screen from the main screen. PIP
Inhaltszusammenfassung zur Seite Nr. 19
V-CHIP OPERATION V-CHIP OPERATION WHAT IS THE V-CHIP? CALLING UP THE BLOCKING MENU WITH YOUR ACCESS CODE The V-CHIP is a microprocessor control circuit which recognizes TV and Motion Picture Ratings. These ratings are contained in a special electronic identification signal that is part of many television 1. Press the MENU button to display the MAIN MENU. programs and recorded videotapes. 2. Use the CHANNEL / buttons move the cursor to FUNCTION. An on-screen menu allows the parent to set a secret
Inhaltszusammenfassung zur Seite Nr. 20
V-CHIP OPERATION V-CHIP OPERATION MOTION PICTURE RATING MOTION PICTURE RATING. This procedure allows parents to block programs which contain MOTION PICTURE RATING REMARKS ratings that they consider inappropriate see next page for Motion Picture ratings. N/A (No rating) Not rated or not applicable program movie has not been rated or ratings do not apply. 1. Press VOL +, CH / button and select the rating which you wish to block. G (Gen
