Inhaltszusammenfassung zur Seite Nr. 1
21” FLAT SCREEN CRT /
DVR OBSERVATION
SYSTEM
WITH 4 NIGHT
VISION CAMERAS
Instruction Manual
English Version1.0
MODEL:
SG21FD3044-161
www.lorexcctv.com
Copyright © 2006 Lorex Technology Inc.
Inhaltszusammenfassung zur Seite Nr. 2
Thank you for purchasing the 21” Flat Screen CRT / DVR Combo. This unique and innovative system provides a complete security package, combining a commercial grade 4 channel Digital Video Recorder (DVR) with a 21” Flat screen CRT monitor. To learn more about this 21” Flat screen CRT / DVR Combo Observation system and about our complete range of accessory products, please visit our website at: www.lorexcctv.com CAUTION ! RISK OF ELECTRIC SHOCK. DO NOT OPEN. CAUTION! TO REDUCE
Inhaltszusammenfassung zur Seite Nr. 3
NOTE: This equipment has been certified and found to comply with the limits regulated by FCC, EMC and LVD. Therefore, it is designed to provide reasonable protection against interference and will not cause interference with other appliance usage. However, it is imperative that user follows this manual's guidelines to avoid improper usage which may result in damage to the unit, electrical shock and fire hazard or injury. In order to improve the feature functions and quality of this prod
Inhaltszusammenfassung zur Seite Nr. 4
CONTENTS 1 GENERAL PRECAUTIONS .................................................................................1 2 CAUTIONS AND FEATURES..............................................................................2 2.1 FEATURES 2 2.2 CAUTIONS 3 2.3 NETVIEWER SOFTWARE INSTALLATION 3 3 SYSTEM INCLUDES ...........................................................................................4 4 GETTING STARTED.....................
Inhaltszusammenfassung zur Seite Nr. 5
17 RECORDING TIME (IN HOURS).......................................................................30 18 RECORDING TIME (IN GIGABYTES PER HOUR) ...........................................31 19 INSTALLING THE HDD .....................................................................................32 20 TECHNICAL SPECIFICATIONS ........................................................................35 21 TROUBLESHOOTING ........................................................................
Inhaltszusammenfassung zur Seite Nr. 6
1 GENERAL PRECAUTIONS 1. Read Instructions: All of the safety and operating 15. Servicing: Do not attempt to service this product instructions should be read and understood before yourself as opening or removing covers may expose the product is used. you to voltage or other hazards. Refer all servicing to qualified service personnel 2. Retain Instructions: The safety and operating instructions should be retained for future reference. 16. Damage Requiring Service: Disconnect this
Inhaltszusammenfassung zur Seite Nr. 7
2 CAUTIONS & FEATURES: 2.1 FEATURES MONITOR • Picture Tube: 21” Flat Color CRT • Horizontal Resolution: More than 480 Lines • Camera capable: 8 (DIN / BNC) (dual quad) • Audio inputs: 8 RCA • Alarm Inputs/Outputs: 8/1 • Slave output A/V: Video: RCA, Audio: RCA Jack • Input signal: 1 V p-p at 75 ohms terminated Power source: Multi-voltage (100-240 VAC) • Power Consumption: 125 watts (Max) • Operation Temperature: 0°C - 40°C (32°F to 104°F) • Weight: 57 lbs (26 Kg) • Color:
Inhaltszusammenfassung zur Seite Nr. 8
2.2 CAUTIONS 1 All the warnings and instructions of this manual should be followed 2 Remove the plug from the outlet before cleaning. Do not use liquid aerosol detergents. Use water damped cloth for cleaning 3 Do not use this unit in very humid and wet places 4 Keep enough space around the unit for ventilation. Slots and openings of the cabinet should not be blocked. 5 During flashes of lightning or cracks of thunder, or when the system is not used for a long time, unplug the syst
Inhaltszusammenfassung zur Seite Nr. 9
3 SYSTEM INCLUDES REC PLAY TIMER ALARM CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 HDD PO WER FULL Q1/Q2 SEQ PIP/POP MENU VOLUME A-SEL TALK STAND-BY USB SEARCH COPY PAN/TILT EVENT ALRS 21” Flat Screen 4 x Cameras (SG7518) 4 x Camera CRT/DVR Combo with camera stand Extension Cables 1 x Ethernet 1 x Net Viewer 2 x HDD Cable Cartridge CD AC Power System Owners Manual Netviewer Manual Cable NOTE: CHECK YOUR P
Inhaltszusammenfassung zur Seite Nr. 10
4 GETTING STARTED 1 Connect the AC Power Cord to the AC Input of the 21” Flat Screen CRT / DVR Combo and plug into an electrical outlet. Connect the cameras into the camera inputs (BNC or DIN) found on the back of the Unit. Plug one end of the Ethernet cable into the Ethernet Port of the 21” Flat Screen CRT / DVR Combo and the other end into an open Ethernet port of the router. Turn the Main Power Switch ON. When power is applied, the unit will go through an internal diagnostic test
Inhaltszusammenfassung zur Seite Nr. 11
After the unit has completed its internal diagnostic test, the network information will be displayed (for a short period of time). (See below) *** NETWORK INFORMATION *** MAC ADDRESS : XX XX XX XX XX XX IP ADDRESS : 192 . 168 . 001 . 100 SUBNET MASK : 255 . 255 . 255 . 000 GATEWAY : 192 . 168 . 001 . 001 PORT : 5000 The unit will then display the video image(s) from the camera. 6
Inhaltszusammenfassung zur Seite Nr. 12
5 DESCRIPTION OF PARTS AND FUNCTION – FRONT PANEL STAND BY LED PLAY REC TIMER ALAR M CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 HDD POWER FULL STAND-BY Q1/Q2 SEQ PIP/POP MENU VOLUME A-SEL TALK USB SEARCH COPY PAN/TILT REC EVENT WTMK ALRS REC STOP MIC JOG SHUTTLE USB PORT CHANNEL / ARROW BUTTON ↵ CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 SEQ BUTTON PIP/POP BUTTON AUDIO SEL BUTTON QUAD 1/2 BUTTON TALK BUTTON Q1/Q2 SEQ PIP/POP MENU VOLUME A-SEL TALK VOLUME BUTTON MENU BUTTON
Inhaltszusammenfassung zur Seite Nr. 13
2 QUAD BUTTON Pressing this button goes to Quad viewing mode, either Page A (Q1) or Page B (Q2). 3 SEQ BUTTON Used to automatically sequence between all camera locations in full screen view. Press SEQ again to stop sequential viewing. Sequence settings are programmable via the Menu. 4 PIP/POP BUTTON PIP allows you to view two camera locations simultaneously, one being the main channel, the other being viewed as a sub-picture. Dual PIP can also be selected, which displays two sub-
Inhaltszusammenfassung zur Seite Nr. 14
By pressing and holding this button the user has the ability to talk to a specific camera location. This button must be pressed the entire time, while talking. To listen to the camera location, release the Talk button. 9 SEARCH / EVENT BUTTON a) SEARCH : Pressing this button brings up the Search menu, which allows you to quickly find recordings. b) EVENT : Pressing this button brings up a list of up to 1,000 Events, including Power, Loss and Alarms. You can scroll through Events us
Inhaltszusammenfassung zur Seite Nr. 15
13 REW BUTTON Press this button to begin high-speed reverse playback during the playback. 14 PLAY / PAUSE BUTTON a) Initiates video Playback. b) PAUSE : Press this button to pause video in playback. 15 FF BUTTON Press this button to begin high-speed forward playback during the playback. 16 REC / REC STOP BUTTON REC: Press this button to start manual recording. REC STOP: Pressing this button for more than 3 seconds will stop recording. 17 STAND_BY BUTTON Turns the monitor
Inhaltszusammenfassung zur Seite Nr. 16
e) HDD FULL: If the OVERWRITE menu is set up, the LED will not blink in any case. The LED blinks if the HDD has less than 1GB of storage space, and remains ON when the HDD is FULL. f) POWER: This LED will be illuminated when POWER is applied to the unit. 21 USB PORT Connect a USB memory stick to back-up the recorded data. Note: The amount of data that can be transferred based on the capacity of the memory stick. 11
Inhaltszusammenfassung zur Seite Nr. 17
IDE-SUB VIDEO AUDIO 6 DESCRIPTION OF PARTS AND FUNCTION – BACK PANEL 11 2 10 9 8 7 CH1 CH3 CH5 CH7 ETHERNET USB RS-232 ALARM OUT WARNING OUT CH2 CH4 CH6 CH8 POWER + - + - + - + - + - + - + - + - VIDEO INPUT SLAVE MONITOR AUDIO INPUT OUT OUT CH1 CH3 CH5 CH7 1 2 3 4 5 6 7 8 CH2 CH4 CH6 CH8 AC 12 1
Inhaltszusammenfassung zur Seite Nr. 18
7 MAIN MENU CONTROL MAIN 1.TIME/DATE SET DISPLAY TIME DATE DATE FORMAT 2. SEQUENCE SET QUAD A CH1 : QUAD B CH5 : 3.TITLE SET DISPLAY CH1 : : CH8 4.ALARM SET ALARM CH1 : : CH8 5.MOTION SET MOTION CHANNEL SENSITIVITY AREA KEY BUZZER 6.SYSTEM (Ⅰ) LOSS BUZZER QUAD LINE BLANK COLOR TITLE/TIME ALARM OUT DEFAULT SET 13
Inhaltszusammenfassung zur Seite Nr. 19
7. SY 7. SYS ST TE EM M ( (Ⅱ Ⅱ ) ) HD HDD INFO D INFO DIS DISP P RS232 B RS232 BA AUD UD R RA AT TE E PA PASS SSWOR WORD D SE SET T NET NETW WOR ORK(T K(TC CP/IP) P/IP) US USER ID/ ER ID/P PA AS SSW SWO OR RD D G GU UEST EST P PA ASSW SSWO OR RD D B BA AND W ND WI IDT DTH H IP A IP AD DDR DR SU SUB NET B NET GA GAT TE EW WA AY Y PO PORT RT 8.HDD 8.HDD 8.HDD / RE / RE / REC C C SET SET SET REC QU REC QU REC QUA A AL L LIT IT ITY Y Y REC RE REC RE REC RESOLUT SOLUT SOLUTI I IO O ON N N RE RE R
Inhaltszusammenfassung zur Seite Nr. 20
Enter the MENU screen by pressing the MENU button. Scroll through the 12 options by pressing the UP and DOWN buttons. To enter a sub-menu, press the Enter button where the highlighted scroll bar is located. To exit the Main Menu, scroll down to the Exit option and press the Enter button. NOTE: In sub menu of the Main Menu, you can exit the Menu mode by selecting Exit, or you can return to the Main Menu by selecting Return. NOTE: The Menu is exited automatically after 60 sec of inac
